Use the generic sdhci_set_control_reg() instead of duplicating in platform driver.
Signed-off-by: Faiz Abbas <faiz_ab...@ti.com> --- drivers/mmc/am654_sdhci.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c index 410517398a..92aac8c0e7 100644 --- a/drivers/mmc/am654_sdhci.c +++ b/drivers/mmc/am654_sdhci.c @@ -151,21 +151,6 @@ struct am654_driver_data { u32 flags; }; -static void am654_sdhci_set_control_reg(struct sdhci_host *host) -{ - struct mmc *mmc = (struct mmc *)host->mmc; - u32 reg; - - if (IS_SD(host->mmc) && - mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { - reg = sdhci_readw(host, SDHCI_HOST_CONTROL2); - reg |= SDHCI_CTRL_VDD_180; - sdhci_writew(host, reg, SDHCI_HOST_CONTROL2); - } - - sdhci_set_uhs_timing(host); -} - static int am654_sdhci_setup_dll(struct am654_sdhci_plat *plat, unsigned int speed) { @@ -433,7 +418,7 @@ const struct sdhci_ops am654_sdhci_ops = { #endif .deferred_probe = am654_sdhci_deferred_probe, .set_ios_post = &am654_sdhci_set_ios_post, - .set_control_reg = &am654_sdhci_set_control_reg, + .set_control_reg = sdhci_set_control_reg, .write_b = am654_sdhci_write_b, }; @@ -476,6 +461,7 @@ const struct sdhci_ops j721e_4bit_sdhci_ops = { #endif .deferred_probe = am654_sdhci_deferred_probe, .set_ios_post = &j721e_4bit_sdhci_set_ios_post, + .set_control_reg = sdhci_set_control_reg, .write_b = am654_sdhci_write_b, }; -- 2.17.1