Re: i.MX RT1050 toolchain

[Andy Pont]

Giulio wrote…

Perfect, I suggest you to test it on a EVK before than going with your
custom board if you can, and after port your board, that should make it
easier.
I certainly will do! One supplementary question… what did you use U-Boot 
to boot?  I’m looking to get uClinux running on it.  As a starting point 
I have only been able to find the BSP from EmCraft[1] but at kernel 
version 4.5 it is quite old.

-Andy.

1 - https://www.emcraft.com/products/979