This patch switches from the legacy mmc driver to the new generic mmc driver
Signed-off-by: Steve Sakoman <[email protected]> --- board/ti/beagle/beagle.c | 9 +++++++++ include/configs/omap3_beagle.h | 10 ++++++---- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 4647908..c5d6679 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -32,6 +32,7 @@ #include <common.h> #include <twl4030.h> #include <asm/io.h> +#include <asm/arch/mmc_host_def.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> #include <asm/arch/gpio.h> @@ -169,3 +170,11 @@ void set_muxconf_regs(void) { MUX_BEAGLE(); } + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index fbe96aa..3161a6e 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -95,8 +95,9 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} +#define CONFIG_GENERIC_MMC 1 #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* DDR - I use Micron DDR */ @@ -183,6 +184,7 @@ "vram=12M\0" \ "dvimode=1024x768mr...@60\0" \ "defaultdisplay=dvi\0" \ + "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext3 rootwait\0" \ "nandroot=/dev/mtdblock4 rw\0" \ @@ -203,10 +205,10 @@ "omapdss.def_disp=${defaultdisplay} " \ "root=${nandroot} " \ "rootfstype=${nandrootfstype}\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ @@ -216,7 +218,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc init; then " \ + "if mmc rescan ${mmcdev}; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ -- 1.7.0.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
