The implementation of this driver was needed to bind the device tree
sub-nodes of the 'clocks' node. In fact, the lack of the compatible
property in the 'clocks' node does not allow the generic 'syscon' or
'simple-bus' drivers linked to the 'scm_conf@0' node to bind the
'clocks' node and in turn its sub-nodes.
The 'scm@210000' node is therefore the node closest to the 'clocks' node
whose driver can bind all the 'clocks' sub-nodes. In this way, the
address translation functions are able to walk along the device tree
towards the upper nodes until the address composition is completed.
scm: scm@210000 {
compatible = "ti,am3-scm", "simple-bus";
...
scm_conf: scm_conf@0 {
compatible = "syscon", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x800>;
scm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
};
};
For DT binding details see Linux doc:
- Documentation/devicetree/bindings/arm/omap/ctrl.txt
Signed-off-by: Dario Binacchi <dario...@libero.it>
---
Changes in v4:
- Include device_compat.h header for dev_xxx macros.
Changes in v3:
- Remove doc/device-tree-bindings/arm/omap,ctrl.txt.
- Remove doc/device-tree-bindings/pinctrl/pinctrl-single.txt.
- Add to commit message the references to linux kernel dt binding
documentation.
Changes in v2:
- Remove the 'ti_am3_scm_clocks' driver. Handle 'scm_clocks' node in
the 'ti_am3_scm' driver.
- Update the commit message.
drivers/misc/Kconfig | 7 ++++
drivers/misc/Makefile | 1 +
drivers/misc/ti-am3-scm.c | 82 +++++++++++++++++++++++++++++++++++++++
3 files changed, 90 insertions(+)
create mode 100644 drivers/misc/ti-am3-scm.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index b67e906a76..9e8b676637 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -500,4 +500,11 @@ config ESM_PMIC
Support ESM (Error Signal Monitor) on PMIC devices. ESM is used
typically to reboot the board in error condition.
+config TI_AM3_SCM
+ bool "AM33XX specific control module support (SCM)"
+ depends on ARCH_OMAP2PLUS
+ help
+ The control module includes status and control logic not addressed
+ within the peripherals or the rest of the device infrastructure.
+
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 947bd3a647..056fb3b522 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -75,3 +75,4 @@ obj-$(CONFIG_MICROCHIP_FLEXCOM) += microchip_flexcom.o
obj-$(CONFIG_K3_AVS0) += k3_avs.o
obj-$(CONFIG_ESM_K3) += k3_esm.o
obj-$(CONFIG_ESM_PMIC) += esm_pmic.o
+obj-$(CONFIG_TI_AM3_SCM) += ti-am3-scm.o
diff --git a/drivers/misc/ti-am3-scm.c b/drivers/misc/ti-am3-scm.c
new file mode 100644
index 0000000000..ed886e6916
--- /dev/null
+++ b/drivers/misc/ti-am3-scm.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AM335x specific control module (scm)
+ *
+ * Copyright (C) 2020 Dario Binacchi <dario...@libero.it>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/lists.h>
+#include <linux/err.h>
+
+static int ti_am3_scm_bind(struct udevice *dev)
+{
+ ofnode clocks_node, conf_node, node;
+ struct udevice *conf_dev;
+ int err;
+
+ if (!strcmp("clocks", ofnode_get_name(dev_ofnode(dev)))) {
+ ofnode_for_each_subnode(node, dev_ofnode(dev)) {
+ dev_dbg(dev, "%s: node=%s\n", __func__,
+ ofnode_get_name(node));
+ err = lists_bind_fdt(dev, node, NULL, false);
+ if (err) {
+ dev_err(dev, "%s: lists_bind_fdt, err=%d\n",
+ __func__, err);
+ return err;
+ }
+ }
+
+ return 0;
+ }
+
+ err = dm_scan_fdt_dev(dev);
+ if (err) {
+ dev_err(dev, "%s: dm_scan_fdt, err=%d\n", __func__, err);
+ return err;
+ }
+
+ conf_node = dev_read_subnode(dev, "scm_conf@0");
+ if (!ofnode_valid(conf_node)) {
+ dev_err(dev, "%s: failed to get conf sub-node\n", __func__);
+ return -ENODEV;
+ }
+
+ if (uclass_get_device_by_ofnode(UCLASS_SYSCON, conf_node, &conf_dev)) {
+ if (uclass_get_device_by_ofnode(UCLASS_SIMPLE_BUS, conf_node,
+ &conf_dev)) {
+ dev_err(dev, "%s: failed to get conf device\n",
+ __func__);
+ return -ENODEV;
+ }
+ }
+
+ clocks_node = dev_read_subnode(conf_dev, "clocks");
+ if (!ofnode_valid(clocks_node)) {
+ dev_err(dev, "%s: failed to get clocks sub-node\n", __func__);
+ return -ENODEV;
+ }
+
+ err = device_bind_driver_to_node(conf_dev, "ti_am3_scm", "scm_clocks",
+ clocks_node, NULL);
+ if (err) {
+ dev_err(dev, "%s: failed to bind scm_clocks\n", __func__);
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id ti_am3_scm_ids[] = {
+ {.compatible = "ti,am3-scm"},
+ {}
+};
+
+U_BOOT_DRIVER(ti_am3_scm) = {
+ .name = "ti_am3_scm",
+ .id = UCLASS_SIMPLE_BUS,
+ .of_match = ti_am3_scm_ids,
+ .bind = ti_am3_scm_bind,
+};
--
2.17.1
