On Tue, Nov 3, 2020 at 10:34 PM Christian Gmeiner <christian.gmei...@gmail.com> wrote: > > If u-boot gets used as coreboot payload it might be nice to get > vendor, model and bios version from smbios. I am not sure about > the output of all the read information. > > With qemu target for coreboot this could look this: > > CBFS: Found @ offset 14f40 size 3b188 > Checking segment from ROM address 0xffc15178 > Checking segment from ROM address 0xffc15194 > Loading segment from ROM address 0xffc15178 > code (compression=1) > New segment dstaddr 0x01110000 memsize 0x889ef srcaddr 0xffc151b0 filesize > 0x3b150 > Loading Segment: addr: 0x01110000 memsz: 0x00000000000889ef filesz: > 0x000000000003b150 > using LZMA > Loading segment from ROM address 0xffc15194 > Entry Point 0x01110000 > BS: BS_PAYLOAD_LOAD run times (exec / console): 77 / 1 ms > Jumping to boot code at 0x01110000(0x07fa7000) > > U-Boot 2020.10-00536-g5dcf7cc590-dirty (Oct 07 2020 - 14:21:51 +0200) > > CPU: x86_64, vendor AMD, device 663h > DRAM: 127.1 MiB > MMC: > Video: No video mode configured in coreboot! > Video: No video mode configured in coreboot! > Vendor: QEMU > Model: Standard PC (i440FX + PIIX, 1996) > Bios Version: 4.12-3152-g326a499f6f-dirty > Net: e1000: 52:54:00:12:34:56 > eth0: e1000#0 > No working controllers found > Finalizing coreboot > Hit any key to stop autoboot: 0 > > Signed-off-by: Christian Gmeiner <christian.gmei...@gmail.com> > Reviewed-by: Bin Meng <bmeng...@gmail.com> > --- > board/coreboot/coreboot/coreboot.c | 45 ++++++++++++++++++++++++++++++ > configs/coreboot_defconfig | 1 + > 2 files changed, 46 insertions(+) >
applied to u-boot-x86, thanks!
