[PATCH v2] mmc: fsl_esdhc_imx: add wait_dat0() support

[haibo . chen]

From: Haibo Chen <haibo.c...@nxp.com>

Add wait_dat0() support, upper layer will use this callback.

Signed-off-by: Haibo Chen <haibo.c...@nxp.com>
---
 drivers/mmc/fsl_esdhc_imx.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 22040c67a8..29592d1f2c 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -1646,6 +1646,20 @@ static int fsl_esdhc_set_enhanced_strobe(struct udevice 
*dev)
 }
 #endif
 
+static int fsl_esdhc_wait_dat0(struct udevice *dev, int state,
+                               int timeout_us)
+{
+       int ret;
+       u32 tmp;
+       struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+       struct fsl_esdhc *regs = priv->esdhc_regs;
+
+       ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp,
+                               !!(tmp & PRSSTAT_DAT0) == !!state,
+                               timeout_us);
+       return ret;
+}
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
        .get_cd         = fsl_esdhc_get_cd,
        .send_cmd       = fsl_esdhc_send_cmd,
@@ -1656,6 +1670,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 #if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
        .set_enhanced_strobe = fsl_esdhc_set_enhanced_strobe,
 #endif
+       .wait_dat0 = fsl_esdhc_wait_dat0,
 };
 #endif
 
-- 
2.17.1