Hello, it seems, that with relocation enabled, some data does not seem to get initialized properly:
w/o relocation: mmci mci: setting clock 194000 Hz, block size 512 mci: setting clock 194000 Hz, block size 512 mci: setting clock 194000 Hz, block size 512 mci: setting clock 194000 Hz, block size 512 mci: setting clock 24832000 Hz, block size 512 Device: mci Manufacturer ID: 89 OEM: 303 Name: NCard Tran Speed: 25000000 Rd Block Len: 512 SD version 2.0 High Capacity: No Capacity: 2006974464 Bus Width: 4-bit with relocation: mmci mci: setting clock 0 Hz, block size 512 mci: setting clock 0 Hz, block size 512 mci: setting clock 0 Hz, block size 512 mci: setting clock 0 Hz, block size 512 mci: setting clock 0 Hz, block size 512 Device: mci Manufacturer ID: 89 OEM: 303 Name: NCard Tran Speed: 25000000 Rd Block Len: 512 SD version 2.0 High Capacity: No Capacity: 2006974464 Bus Width: 4-bit Do I understand right what the required changes are: 1. change dram_init 2. make sure TEXT_BASE is correct as to where u-boot is loaded by a preloader and is NOT pointing near top of RAM. 3. I do not have a board specific .lds - should I now have one? Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
