[PATCH 06/18] common: board_r: Drop initr_secondary_cpu wrapper

[Ovidiu Panait]

Add a return value to cpu_secondary_init_r and use it directly in the
post-relocation init sequence, rather than using a wrapper stub.

Signed-off-by: Ovidiu Panait <ovidiu.pan...@windriver.com>
---
 arch/powerpc/cpu/mpc85xx/cpu_init.c |  4 +++-
 common/board_r.c                    | 17 ++---------------
 2 files changed, 5 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c 
b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index e0f0f7ecda..e920e01b25 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -1028,7 +1028,7 @@ void arch_preboot_os(void)
        mtmsr(msr);
 }
 
-void cpu_secondary_init_r(void)
+int cpu_secondary_init_r(void)
 {
 #ifdef CONFIG_QE
 #ifdef CONFIG_U_QE
@@ -1040,6 +1040,8 @@ void cpu_secondary_init_r(void)
        qe_init(qe_base);
        qe_reset();
 #endif
+
+       return 0;
 }
 
 #ifdef CONFIG_BOARD_LATE_INIT
diff --git a/common/board_r.c b/common/board_r.c
index 07c0ad363e..a291543d74 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -91,21 +91,8 @@ __weak int board_flash_wp_on(void)
        return 0;
 }
 
-__weak void cpu_secondary_init_r(void)
+__weak int cpu_secondary_init_r(void)
 {
-}
-
-static int initr_secondary_cpu(void)
-{
-       /*
-        * after non-volatile devices & environment is setup and cpu code have
-        * another round to deal with any initialization that might require
-        * full access to the environment or loading of some image (firmware)
-        * from a non-volatile device
-        */
-       /* TODO: maybe define this for all archs? */
-       cpu_secondary_init_r();
-
        return 0;
 }
 
@@ -801,7 +788,7 @@ static init_fnc_t init_sequence_r[] = {
        initr_malloc_bootparams,
 #endif
        INIT_FUNC_WATCHDOG_RESET
-       initr_secondary_cpu,
+       cpu_secondary_init_r,
 #if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
        mac_read_from_eeprom,
 #endif
-- 
2.17.1