From: Nicolas Ferre <nicolas.fe...@microchip.com>
SAMA7G5 uses CCF driver under drivers/clk/at91/ and not the custom older
at91 clock.c driver. Remove it from the compilation list and adapt cpu.c
arch_cpu_init() to avoid calling at91_clock_init() which is wrong
anyway.
Signed-off-by: Nicolas Ferre <nicolas.fe...@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.bez...@microchip.com>
---
arch/arm/mach-at91/armv7/Makefile | 7 +++----
arch/arm/mach-at91/armv7/cpu.c | 4 ++++
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-at91/armv7/Makefile
b/arch/arm/mach-at91/armv7/Makefile
index 55477560a8..b46b90b28e 100644
--- a/arch/arm/mach-at91/armv7/Makefile
+++ b/arch/arm/mach-at91/armv7/Makefile
@@ -6,11 +6,10 @@
# (C) Copyright 2013
# Bo Shen <voice.s...@atmel.com>
-obj-$(CONFIG_SAMA5D2) += sama5d2_devices.o
-obj-$(CONFIG_SAMA5D3) += sama5d3_devices.o
-obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o
+obj-$(CONFIG_SAMA5D2) += sama5d2_devices.o clock.o
+obj-$(CONFIG_SAMA5D3) += sama5d3_devices.o clock.o
+obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o clock.o
obj-$(CONFIG_SAMA7G5) += sama7g5_devices.o
-obj-y += clock.o
obj-y += cpu.o
obj-y += reset.o
ifeq ($(CONFIG_ATMEL_PIT_TIMER),)
diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c
index 8b7355042b..9b3753491e 100644
--- a/arch/arm/mach-at91/armv7/cpu.c
+++ b/arch/arm/mach-at91/armv7/cpu.c
@@ -24,7 +24,11 @@
int arch_cpu_init(void)
{
+#if defined(CONFIG_CLK_CCF)
+ return 0;
+#else
return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+#endif
}
void arch_preboot_os(void)
--
2.25.1
