Le 03/10/2010 12:50, Hiremath, Vaibhav a écrit : > Hi All, > > I think the current denx/matser is broken and is not building up for OMAP3 > platforms except Beagle board. > > The error message on build is - > > board.c: In function '__dram_init_banksize': > board.c:468: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this > function) > board.c:468: error: (Each undeclared identifier is reported only once > board.c:468: error: for each function it appears in.) > board.c: In function 'board_init_f': > board.c:514: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in this > function) > board.c:547: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this > function) > make[1]: *** [board.o] Error 1 > make[1]: Leaving directory `/home/devel/git-work/denx-uboot/arch/arm/lib' > make: *** [arch/arm/lib/libarm.a] Error 2 > > > The root-cause is- > > +#undef CONFIG_SYS_ARM_WITHOUT_RELOC > +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - > CONFIG_SYS_GBL_DATA_SIZE) > > > The above definition is missing in all (zoom1, zoom2, evm, am3517evm, > sdp3430, overo, Pandora) config files. > > Am I missing something here? Just wanted to cross-check before posting patch > to the list.
This is due to the introduction of relocation on ARM platforms -- see Wolfgang's recent release announcement. Note that adding the definition may not be sufficient to get relocation working. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
