Add a return value to pci_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub.
Signed-off-by: Ovidiu Panait <ovidiu.pan...@windriver.com> --- v2 updates: - add function comment common/board_r.c | 18 ++++-------------- drivers/pci/pci-uclass.c | 4 +++- drivers/pci/pci.c | 6 ++++-- include/init.h | 13 ++++++++++++- 4 files changed, 23 insertions(+), 18 deletions(-) diff --git a/common/board_r.c b/common/board_r.c index d86ff0cb5e..414b6272c5 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -214,16 +214,6 @@ static int initr_unlock_ram_in_cache(void) } #endif -#ifdef CONFIG_PCI -static int initr_pci(void) -{ - if (IS_ENABLED(CONFIG_PCI_INIT_R)) - pci_init(); - - return 0; -} -#endif - static int initr_barrier(void) { #ifdef CONFIG_PPC @@ -732,12 +722,12 @@ static init_fnc_t init_sequence_r[] = { post_output_backlog, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT) +#if defined(CONFIG_PCI_INIT_R) && defined(CONFIG_SYS_EARLY_PCI_INIT) /* * Do early PCI configuration _before_ the flash gets initialised, * because PCU resources are crucial for flash access on some boards. */ - initr_pci, + pci_init, #endif #ifdef CONFIG_ARCH_EARLY_INIT_R arch_early_init_r, @@ -776,11 +766,11 @@ static init_fnc_t init_sequence_r[] = { mac_read_from_eeprom, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT) +#if defined(CONFIG_PCI_INIT_R) && !defined(CONFIG_SYS_EARLY_PCI_INIT) /* * Do pci configuration */ - initr_pci, + pci_init, #endif stdio_add_devices, initr_jumptable, diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index eb07d25301..7e9b5cf0fa 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -1834,7 +1834,7 @@ U_BOOT_DRIVER(pci_generic_drv) = { .of_match = pci_generic_ids, }; -void pci_init(void) +int pci_init(void) { struct udevice *bus; @@ -1847,4 +1847,6 @@ void pci_init(void) uclass_next_device_check(&bus)) { ; } + + return 0; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 664e8379eb..a7453e5755 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -454,16 +454,18 @@ int pci_hose_scan(struct pci_controller *hose) return pci_hose_scan_bus(hose, hose->current_busno); } -void pci_init(void) +int pci_init(void) { hose_head = NULL; /* allow env to disable pci init/enum */ if (env_get("pcidisable") != NULL) - return; + return 0; /* now call board specific pci_init()... */ pci_init_board(); + + return 0; } /* Returns the address of the requested capability structure within the diff --git a/include/init.h b/include/init.h index c6c5f34b55..dded1cb871 100644 --- a/include/init.h +++ b/include/init.h @@ -186,6 +186,18 @@ int cpu_secondary_init_r(void); */ int pci_ep_init(void); +/** + * pci_init() - Enumerate pci devices + * + * It is called during the generic post-relocation init sequence to enumerate + * pci buses. This is needed, for instance, in the case of DM PCI-based + * Ethernet devices, which will not be detected without having the enumeration + * performed earlier. + * + * Return: 0 if OK + */ +int pci_init(void); + /** * init_cache_f_r() - Turn on the cache in preparation for relocation * @@ -257,7 +269,6 @@ int mac_read_from_eeprom(void); int set_cpu_clk_info(void); int update_flash_size(int flash_size); int arch_early_init_r(void); -void pci_init(void); int misc_init_r(void); #if defined(CONFIG_VID) int init_func_vid(void); -- 2.17.1