Hi Patrice > From: Patrice CHOTARD <patrice.chot...@st.com> > Sent: vendredi 6 novembre 2020 08:12 > > Since kernel v4.8-rc1, commit 05b23ebc2bd9 ("ARM: dts: armv7-m: remove > skeleton.dtsi include"), skeleton.dtsi file is no more included. > > This synchronization is needed to avoid to get 2 memory node in DTB file if, > in > DTS file, memory node is declared with the correct syntax as following: > > memory@90000000 { > device_type = "memory"; > reg = <0x90000000 0x800000>; > }; > > Then in DTB, we will have the 2 memory nodes, which is incorrect and cause > misbehavior during DT parsing by U-boot: > > memory { > device_type = "memory"; > reg = <0x00 0x00>; > }; > > memory@90000000 { > device_type = "memory"; > reg = <0x90000000 0x800000>; > }; > > Issue found when synchronizing MCU's STM32 DT from kernel v5.10-rc1. > When using fdtdec_setup_mem_size_base() or fdtdec_setup_memory_banksize() > API, first above memory node is found (with reg = <0x00 0x00>), so > gd->ram_size, gd->ram_base, gd->bd->bi_dram[bank].start and > gd->bd->bi_dram[bank].size are all set to 0 which avoid boards to boot. > > Signed-off-by: Patrice Chotard <patrice.chot...@st.com> > --- > > arch/arm/dts/armv7-m.dtsi | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/arch/arm/dts/armv7-m.dtsi b/arch/arm/dts/armv7-m.dtsi index > 31349da75a..26f5443d85 100644 > --- a/arch/arm/dts/armv7-m.dtsi > +++ b/arch/arm/dts/armv7-m.dtsi > @@ -1,5 +1,4 @@ > -#include "skeleton.dtsi" > - > +// SPDX-License-Identifier: GPL-2.0 > / { > nvic: interrupt-controller@e000e100 { > compatible = "arm,armv7m-nvic"; > @@ -22,4 +21,3 @@ > ranges; > }; > }; > - > -- > 2.17.1
Reviewed-by: Patrick Delaunay <patrick.delau...@st.com> Applied to u-boot-stm/master, thanks! Thanks Patrick