Hi, This driver is connected via spi on one ZynqMP board. Only 8bit SPI connection is supported now. Spi zynq driver was used for testing this driver. We have tested load image via BMP command and also using it as console as is visible from log in the last patch.
Thanks, Michal Changes in v3: - also fix video_bmp call. - use 32bit reg/value parameters - new patch in this series Changes in v2: - New patch is series - New patch is series - Add support for returning value - Update kernel-doc format to pass kernel-doc script - Update patch subject s/call/operation/ - Fix Kconfig entry and use VIDEO_SEPS525 instead of SEPS525 and fix location - Add kernel-doc structure for seps525_priv structure - Remove flags variable and use macros directly Michal Simek (5): video: Fix video sync kernel-doc format video: Let video_sync to return error value video: Introduce video_sync operation video: seps525: Add seps525 SPI driver video: Call video_sync in video_clear() Vikhyat Goyal (1): video: seps525: Add dt binding description MAINTAINERS | 2 + .../video/syncoam,seps525.txt | 24 ++ drivers/video/Kconfig | 7 + drivers/video/Makefile | 1 + drivers/video/seps525.c | 327 ++++++++++++++++++ drivers/video/vidconsole-uclass.c | 40 ++- drivers/video/video-uclass.c | 23 +- drivers/video/video_bmp.c | 5 +- include/video.h | 22 +- 9 files changed, 426 insertions(+), 25 deletions(-) create mode 100644 doc/device-tree-bindings/video/syncoam,seps525.txt create mode 100644 drivers/video/seps525.c -- 2.29.2