[PATCH] board: amlogic: vim3: setup ethernet mac from efuse

[Artem Lapkin]

Add the board specific code for reading built-in ethernet MAC address from efuse

NOTE: MAC is stored in ASCII format, 1bytes = 2characters by 0 offset

if mac from efuse not valid we use meson_generate_serial_ethaddr

NOTE: remake odroid-n2.c variant from Neil Armstrong <narmstr...@baylibre.com>

Signed-off-by: Artem Lapkin <a...@khadas.com>
---
 board/amlogic/vim3/vim3.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c
index 09ef39ff30..c5d19cc17b 100644
--- a/board/amlogic/vim3/vim3.c
+++ b/board/amlogic/vim3/vim3.c
@@ -11,9 +11,14 @@
 #include <net.h>
 #include <asm/io.h>
 #include <asm/arch/eth.h>
+#include <asm/arch/sm.h>
 #include <i2c.h>
 #include "khadas-mcu.h"
 
+#define EFUSE_MAC_OFFSET       0
+#define EFUSE_MAC_SIZE         12
+#define MAC_ADDR_LEN           6
+
 /*
  * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
  * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
@@ -131,7 +136,37 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd)
 
 int misc_init_r(void)
 {
+       u8 mac_addr[MAC_ADDR_LEN];
+       char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3];
+       ssize_t len;
+
        meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
 
+       if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
+
+               len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, efuse_mac_addr, 
EFUSE_MAC_SIZE);
+               if (len != EFUSE_MAC_SIZE)
+                       return 0;
+
+               /* MAC is stored in ASCII format, 1bytes = 2characters */
+               for (int i = 0; i < 6; i++) {
+                       tmp[0] = efuse_mac_addr[i * 2];
+                       tmp[1] = efuse_mac_addr[i * 2 + 1];
+                       tmp[2] = '\0';
+                       mac_addr[i] = simple_strtoul(tmp, NULL, 16);
+               }
+
+               if (is_valid_ethaddr(mac_addr))
+                       eth_env_set_enetaddr("ethaddr", mac_addr);
+               else
+                       meson_generate_serial_ethaddr();
+
+               eth_env_get_enetaddr("ethaddr", mac_addr);
+               printf("[i] setup onboard mac %02X:%02X:%02X:%02X:%02X:%02X\n",
+                       mac_addr[0],mac_addr[1],mac_addr[2],
+                       mac_addr[3],mac_addr[4],mac_addr[5]);
+
+       }
+
        return 0;
 }
-- 
2.25.1