> -----Original Message-----
> From: ChiaWei Wang <chiawei_w...@aspeedtech.com>
> Sent: Monday, December 14, 2020 1:54 PM
> To: tr...@konsulko.com; u-boot@lists.denx.de; Ryan Chen
> <ryan_c...@aspeedtech.com>
> Cc: BMC-SW <bmc...@aspeedtech.com>
> Subject: [PATCH 5/7] ARM: dts: aspeed: Add AST2600 SoC support
>
> AST2600 is the 7th generation of Aspeed SoC designated for Interated Remote
> Management Processor.
>
> AST2600 has significant performance improvement by integrating 1.2GHz
> dual-core ARM Cortex A7 (r0p5) CPU with FPU. Most of the controllers are also
> improved with more features and better performance than preceding
> AST24xx/AST25xx.
>
> Signed-off-by: Chia-Wei, Wang <chiawei_w...@aspeedtech.com>
Reviewed-by: Ryan Chen <ryan_c...@aspeedtech.com>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/ast2600-evb.dts | 179 +++
> arch/arm/dts/ast2600-u-boot.dtsi | 44 +
> arch/arm/dts/ast2600.dtsi | 1946
> ++++++++++++++++++++++++++++++
> 4 files changed, 2170 insertions(+)
> create mode 100644 arch/arm/dts/ast2600-evb.dts create mode 100644
> arch/arm/dts/ast2600-u-boot.dtsi create mode 100644
> arch/arm/dts/ast2600.dtsi
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index
> 02d04f5a8c..3e501b0f35 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -947,6 +947,7 @@ dtb-$(CONFIG_ARCH_BCM6858) += \
> dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
>
> dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
> +dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
>
> dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
>
> diff --git a/arch/arm/dts/ast2600-evb.dts b/arch/arm/dts/ast2600-evb.dts new
> file mode 100644 index 0000000000..2abd31341c
> --- /dev/null
> +++ b/arch/arm/dts/ast2600-evb.dts
> @@ -0,0 +1,179 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +/dts-v1/;
> +
> +#include "ast2600-u-boot.dtsi"
> +
> +/ {
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x40000000>;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + };
> +
> + aliases {
> + mmc0 = &emmc_slot0;
> + mmc1 = &sdhci_slot0;
> + mmc2 = &sdhci_slot1;
> + spi0 = &fmc;
> + spi1 = &spi1;
> + spi2 = &spi2;
> + ethernet0 = &mac0;
> + ethernet1 = &mac1;
> + ethernet2 = &mac2;
> + ethernet3 = &mac3;
> + };
> +
> + cpus {
> + cpu@0 {
> + clock-frequency = <800000000>;
> + };
> + cpu@1 {
> + clock-frequency = <800000000>;
> + };
> + };
> +};
> +
> +&uart5 {
> + u-boot,dm-pre-reloc;
> + status = "okay";
> +};
> +
> +&sdrammc {
> + clock-frequency = <400000000>;
> +};
> +
> +&wdt1 {
> + status = "okay";
> +};
> +
> +&fmc {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fmcquad_default>;
> +
> + flash@0 {
> + compatible = "spi-flash", "sst,w25q256";
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + };
> +
> + flash@1 {
> + compatible = "spi-flash", "sst,w25q256";
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + };
> +
> + flash@2 {
> + compatible = "spi-flash", "sst,w25q256";
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default &pinctrl_spi1abr_default
> + &pinctrl_spi1cs1_default &pinctrl_spi1wp_default
> + &pinctrl_spi1wp_default &pinctrl_spi1quad_default>;
> +
> + flash@0 {
> + compatible = "spi-flash", "sst,w25q256";
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + };
> +};
> +
> +&spi2 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
> + &pinctrl_spi2cs2_default &pinctrl_spi2quad_default>;
> +
> + flash@0 {
> + compatible = "spi-flash", "sst,w25q256";
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + };
> +};
> +
> +&emmc {
> + u-boot,dm-pre-reloc;
> + timing-phase = <0x700ff>;
> +};
> +
> +&emmc_slot0 {
> + u-boot,dm-pre-reloc;
> + status = "okay";
> + bus-width = <4>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_emmc_default>;
> + sdhci-drive-type = <1>;
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c5_default>;
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c6_default>;
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c7_default>;
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c8_default>;
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c9_default>;
> +};
> +
> +&scu {
> + mac0-clk-delay = <0x1d 0x1c
> + 0x10 0x17
> + 0x10 0x17>;
> + mac1-clk-delay = <0x1d 0x10
> + 0x10 0x10
> + 0x10 0x10>;
> + mac2-clk-delay = <0x0a 0x04
> + 0x08 0x04
> + 0x08 0x04>;
> + mac3-clk-delay = <0x0a 0x04
> + 0x08 0x04
> + 0x08 0x04>;
> +};
> diff --git a/arch/arm/dts/ast2600-u-boot.dtsi
> b/arch/arm/dts/ast2600-u-boot.dtsi
> new file mode 100644
> index 0000000000..4648c07437
> --- /dev/null
> +++ b/arch/arm/dts/ast2600-u-boot.dtsi
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <dt-bindings/clock/ast2600-clock.h>
> +#include <dt-bindings/reset/ast2600-reset.h>
> +
> +#include "ast2600.dtsi"
> +
> +/ {
> + scu: clock-controller@1e6e2000 {
> + compatible = "aspeed,ast2600-scu";
> + reg = <0x1e6e2000 0x1000>;
> + u-boot,dm-pre-reloc;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + uart-clk-source = <0x0>; /* uart clock source selection: 0:
> uxclk 1:
> huxclk*/
> + };
> +
> + rst: reset-controller {
> + u-boot,dm-pre-reloc;
> + compatible = "aspeed,ast2600-reset";
> + aspeed,wdt = <&wdt1>;
> + #reset-cells = <1>;
> + };
> +
> + sdrammc: sdrammc@1e6e0000 {
> + u-boot,dm-pre-reloc;
> + compatible = "aspeed,ast2600-sdrammc";
> + reg = <0x1e6e0000 0x100
> + 0x1e6e0100 0x300
> + 0x1e6e0400 0x200 >;
> + #reset-cells = <1>;
> + clocks = <&scu ASPEED_CLK_MPLL>;
> + resets = <&rst ASPEED_RESET_SDRAM>;
> + };
> +
> + ahb {
> + u-boot,dm-pre-reloc;
> +
> + apb {
> + u-boot,dm-pre-reloc;
> + };
> +
> + };
> +};
> +
> diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi new file
> mode 100644 index 0000000000..ac0f08b7ea
> --- /dev/null
> +++ b/arch/arm/dts/ast2600.dtsi
> @@ -0,0 +1,1946 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "skeleton.dtsi"
> +
> +/ {
> + model = "Aspeed BMC";
> + compatible = "aspeed,ast2600";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + i2c3 = &i2c3;
> + i2c4 = &i2c4;
> + i2c5 = &i2c5;
> + i2c6 = &i2c6;
> + i2c7 = &i2c7;
> + i2c8 = &i2c8;
> + i2c9 = &i2c9;
> + i2c10 = &i2c10;
> + i2c11 = &i2c11;
> + i2c12 = &i2c12;
> + i2c13 = &i2c13;
> + i2c14 = &i2c14;
> + i2c15 = &i2c15;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + serial3 = &uart4;
> + serial4 = &uart5;
> + serial5 = &uart6;
> + serial6 = &uart7;
> + serial7 = &uart8;
> + serial8 = &uart9;
> + serial9 = &uart10;
> + serial10 = &uart11;
> + serial11 = &uart12;
> + serial12 = &uart13;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "aspeed,ast2600-smp";
> +
> + cpu@0 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <0xf00>;
> + };
> +
> + cpu@1 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <0xf01>;
> + };
> +
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + video_memory: video {
> + size = <0x04000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + no-map;
> + };
> + };
> +
> + ahb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + device_type = "soc";
> + ranges;
> +
> + gic: interrupt-controller@40461000 {
> + compatible = "arm,cortex-a7-gic";
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2)
> |
> IRQ_TYPE_LEVEL_HIGH)>;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + reg = <0x40461000 0x1000>,
> + <0x40462000 0x1000>,
> + <0x40464000 0x2000>,
> + <0x40466000 0x2000>;
> + };
> +
> + ahbc: ahbc@1e600000 {
> + compatible = "aspeed,aspeed-ahbc";
> + reg = < 0x1e600000 0x100>;
> + };
> +
> + fmc: flash-controller@1e620000 {
> + reg = < 0x1e620000 0xc4
> + 0x20000000 0x10000000 >;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "aspeed,ast2600-fmc";
> + status = "disabled";
> + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_AHB>;
> + num-cs = <3>;
> + flash@0 {
> + reg = < 0 >;
> + compatible = "jedec,spi-nor";
> + status = "disabled";
> + };
> + flash@1 {
> + reg = < 1 >;
> + compatible = "jedec,spi-nor";
> + status = "disabled";
> + };
> + flash@2 {
> + reg = < 2 >;
> + compatible = "jedec,spi-nor";
> + status = "disabled";
> + };
> + };
> +
> + spi1: flash-controller@1e630000 {
> + reg = < 0x1e630000 0xc4
> + 0x30000000 0x08000000 >;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "aspeed,ast2600-spi";
> + clocks = <&scu ASPEED_CLK_AHB>;
> + num-cs = <2>;
> + status = "disabled";
> + flash@0 {
> + reg = < 0 >;
> + compatible = "jedec,spi-nor";
> + status = "disabled";
> + };
> + flash@1 {
> + reg = < 1 >;
> + compatible = "jedec,spi-nor";
> + status = "disabled";
> + };
> + };
> +
> + spi2: flash-controller@1e631000 {
> + reg = < 0x1e631000 0xc4
> + 0x50000000 0x08000000 >;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "aspeed,ast2600-spi";
> + clocks = <&scu ASPEED_CLK_AHB>;
> + num-cs = <3>;
> + status = "disabled";
> + flash@0 {
> + reg = < 0 >;
> + compatible = "jedec,spi-nor";
> + status = "disabled";
> + };
> + flash@1 {
> + reg = < 1 >;
> + compatible = "jedec,spi-nor";
> + status = "disabled";
> + };
> + flash@2 {
> + reg = < 2 >;
> + compatible = "jedec,spi-nor";
> + status = "disabled";
> + };
> + };
> +
> + edac: sdram@1e6e0000 {
> + compatible = "aspeed,ast2600-sdram-edac";
> + reg = <0x1e6e0000 0x174>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + mdio: ethernet@1e650000 {
> + compatible = "aspeed,aspeed-mdio";
> + reg = <0x1e650000 0x40>;
> + resets = <&rst ASPEED_RESET_MII>;
> + status = "disabled";
> + };
> +
> + mac0: ftgmac@1e660000 {
> + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
> + reg = <0x1e660000 0x180>, <0x1e650000 0x4>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_MAC1CLK>;
> + status = "disabled";
> + };
> +
> + mac1: ftgmac@1e680000 {
> + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
> + reg = <0x1e680000 0x180>, <0x1e650008 0x4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_MAC2CLK>;
> + status = "disabled";
> + };
> +
> + mac2: ftgmac@1e670000 {
> + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
> + reg = <0x1e670000 0x180>, <0x1e650010 0x4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_MAC3CLK>;
> + status = "disabled";
> + };
> +
> + mac3: ftgmac@1e690000 {
> + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
> + reg = <0x1e690000 0x180>, <0x1e650018 0x4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_MAC4CLK>;
> + status = "disabled";
> + };
> +
> + ehci0: usb@1e6a1000 {
> + compatible = "aspeed,aspeed-ehci", "usb-ehci";
> + reg = <0x1e6a1000 0x100>;
> + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_USBPORT1CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb2ah_default>;
> + status = "disabled";
> + };
> +
> + ehci1: usb@1e6a3000 {
> + compatible = "aspeed,aspeed-ehci", "usb-ehci";
> + reg = <0x1e6a3000 0x100>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_USBPORT2CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb2bh_default>;
> + status = "disabled";
> + };
> +
> + apb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + syscon: syscon@1e6e2000 {
> + compatible = "aspeed,g6-scu", "syscon",
> "simple-mfd";
> + reg = <0x1e6e2000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + ranges = <0 0x1e6e2000 0x1000>;
> +
> + pinctrl: pinctrl {
> + compatible = "aspeed,g6-pinctrl";
> + aspeed,external-nodes = <&gfx &lhc>;
> +
> + };
> +
> + vga_scratch: scratch {
> + compatible = "aspeed,bmc-misc";
> + };
> +
> + scu_ic0: interrupt-controller@0 {
> + #interrupt-cells = <1>;
> + compatible = "aspeed,ast2600-scu-ic";
> + reg = <0x560 0x10>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 12
> IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + };
> +
> + scu_ic1: interrupt-controller@1 {
> + #interrupt-cells = <1>;
> + compatible = "aspeed,ast2600-scu-ic";
> + reg = <0x570 0x10>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 41
> IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + };
> +
> + };
> +
> + smp-memram@0 {
> + compatible = "aspeed,ast2600-smpmem", "syscon";
> + reg = <0x1e6e2180 0x40>;
> + };
> +
> + gfx: display@1e6e6000 {
> + compatible = "aspeed,ast2500-gfx", "syscon";
> + reg = <0x1e6e6000 0x1000>;
> + reg-io-width = <4>;
> + };
> +
> + pcie_bridge0: pcie@1e6ed000 {
> + compatible = "aspeed,ast2600-pcie";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + reg = <0x1e6ed000 0x100>;
> + ranges = <0x81000000 0x0 0x0 0x0 0x0 0x10000>,
> + <0x82000000 0x0 0x60000000 0x60000000
> 0x0
> 0x10000000>;
> + device_type = "pci";
> + bus-range = <0x00 0xff>;
> + resets = <&rst ASPEED_RESET_PCIE_DEV_O>;
> + cfg-handle = <&pcie_cfg0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0rc_default>;
> +
> + status = "disabled";
> + };
> +
> + pcie_bridge1: pcie@1e6ed200 {
> + compatible = "aspeed,ast2600-pcie";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + reg = <0x1e6ed200 0x100>;
> + ranges = <0x81000000 0x0 0x0 0x10000 0x00
> 0x10000>,
> + <0x82000000 0x0 0x70000000 0x70000000
> 0x0
> 0x10000000>;
> + device_type = "pci";
> + bus-range = <0x00 0xff>;
> + resets = <&rst ASPEED_RESET_PCIE_RC_O>;
> + cfg-handle = <&pcie_cfg1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie1rc_default>;
> +
> + status = "disabled";
> + };
> +
> + sdhci: sdhci@1e740000 {
> + #interrupt-cells = <1>;
> + compatible = "aspeed,aspeed-sdhci-irq",
> "simple-mfd";
> + reg = <0x1e740000 0x1000>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + clocks = <&scu ASPEED_CLK_GATE_SDCLK>,
> + <&scu ASPEED_CLK_GATE_SDEXTCLK>;
> + clock-names = "ctrlclk", "extclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1e740000 0x1000>;
> +
> + sdhci_slot0: sdhci_slot0@100 {
> + compatible = "aspeed,sdhci-ast2600";
> + reg = <0x100 0x100>;
> + interrupts = <0>;
> + interrupt-parent = <&sdhci>;
> + sdhci,auto-cmd12;
> + clocks = <&scu ASPEED_CLK_SDIO>;
> + status = "disabled";
> + };
> +
> + sdhci_slot1: sdhci_slot1@200 {
> + compatible = "aspeed,sdhci-ast2600";
> + reg = <0x200 0x100>;
> + interrupts = <1>;
> + interrupt-parent = <&sdhci>;
> + sdhci,auto-cmd12;
> + clocks = <&scu ASPEED_CLK_SDIO>;
> + status = "disabled";
> + };
> + };
> +
> + emmc: emmc@1e750000 {
> + #interrupt-cells = <1>;
> + compatible = "aspeed,aspeed-emmc-irq",
> "simple-mfd";
> + reg = <0x1e750000 0x1000>;
> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + clocks = <&scu ASPEED_CLK_GATE_EMMCCLK>,
> + <&scu ASPEED_CLK_GATE_EMMCEXTCLK>;
> + clock-names = "ctrlclk", "extclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1e750000 0x1000>;
> +
> + emmc_slot0: emmc_slot0@100 {
> + compatible = "aspeed,emmc-ast2600";
> + reg = <0x100 0x100>;
> + interrupts = <0>;
> + interrupt-parent = <&emmc>;
> + clocks = <&scu ASPEED_CLK_EMMC>;
> + status = "disabled";
> + };
> + };
> +
> + h2x: h2x@1e770000 {
> + compatible = "aspeed,ast2600-h2x";
> + reg = <0x1e770000 0x100>;
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst ASPEED_RESET_H2X>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1e770000 0x100>;
> +
> + status = "disabled";
> +
> + pcie_cfg0: cfg0@80 {
> + reg = <0x80 0x80>;
> + compatible = "aspeed,ast2600-pcie-cfg";
> + };
> +
> + pcie_cfg1: cfg1@C0 {
> + compatible = "aspeed,ast2600-pcie-cfg";
> + reg = <0xC0 0x80>;
> + };
> + };
> +
> + gpio0: gpio@1e780000 {
> + compatible = "aspeed,ast2600-gpio";
> + reg = <0x1e780000 0x1000>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + gpio-ranges = <&pinctrl 0 0 220>;
> + ngpios = <208>;
> + };
> +
> + gpio1: gpio@1e780800 {
> + compatible = "aspeed,ast2600-gpio";
> + reg = <0x1e780800 0x800>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + gpio-ranges = <&pinctrl 0 0 208>;
> + ngpios = <36>;
> + };
> +
> + uart1: serial@1e783000 {
> + compatible = "ns16550a";
> + reg = <0x1e783000 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART1CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart5: serial@1e784000 {
> + compatible = "ns16550a";
> + reg = <0x1e784000 0x1000>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART5CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + wdt1: watchdog@1e785000 {
> + compatible = "aspeed,ast2600-wdt";
> + reg = <0x1e785000 0x40>;
> + };
> +
> + wdt2: watchdog@1e785040 {
> + compatible = "aspeed,ast2600-wdt";
> + reg = <0x1e785040 0x40>;
> + };
> +
> + wdt3: watchdog@1e785080 {
> + compatible = "aspeed,ast2600-wdt";
> + reg = <0x1e785080 0x40>;
> + };
> +
> + wdt4: watchdog@1e7850C0 {
> + compatible = "aspeed,ast2600-wdt";
> + reg = <0x1e7850C0 0x40>;
> + };
> +
> + lpc: lpc@1e789000 {
> + compatible = "aspeed,ast2600-lpc",
> "simple-mfd", "syscon";
> + reg = <0x1e789000 0x1000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1e789000 0x1000>;
> +
> + kcs1: kcs1@0 {
> + compatible = "aspeed,ast2600-kcs-bmc";
> + reg = <0x0 0x80>;
> + interrupts = <GIC_SPI 138
> IRQ_TYPE_LEVEL_HIGH>;
> + kcs_chan = <1>;
> + kcs_addr = <0xCA0>;
> + status = "disabled";
> + };
> +
> + kcs2: kcs2@0 {
> + compatible = "aspeed,ast2600-kcs-bmc";
> + reg = <0x0 0x80>;
> + interrupts = <GIC_SPI 139
> IRQ_TYPE_LEVEL_HIGH>;
> + kcs_chan = <2>;
> + kcs_addr = <0xCA8>;
> + status = "disabled";
> + };
> +
> + kcs3: kcs3@0 {
> + compatible = "aspeed,ast2600-kcs-bmc";
> + reg = <0x0 0x80>;
> + interrupts = <GIC_SPI 140
> IRQ_TYPE_LEVEL_HIGH>;
> + kcs_chan = <3>;
> + kcs_addr = <0xCA2>;
> + };
> +
> + kcs4: kcs4@0 {
> + compatible = "aspeed,ast2600-kcs-bmc";
> + reg = <0x0 0x120>;
> + interrupts = <GIC_SPI 141
> IRQ_TYPE_LEVEL_HIGH>;
> + kcs_chan = <4>;
> + kcs_addr = <0xCA4>;
> + status = "disabled";
> + };
> +
> + lpc_ctrl: lpc-ctrl@80 {
> + compatible = "aspeed,ast2600-lpc-ctrl";
> + reg = <0x80 0x80>;
> + status = "disabled";
> + };
> +
> + lpc_snoop: lpc-snoop@80 {
> + compatible = "aspeed,ast2600-lpc-snoop";
> + reg = <0x80 0x80>;
> + interrupts = <GIC_SPI 144
> IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + lhc: lhc@a0 {
> + compatible = "aspeed,ast2600-lhc";
> + reg = <0xa0 0x24 0xc8 0x8>;
> + };
> +
> + lpc_reset: reset-controller@98 {
> + compatible = "aspeed,ast2600-lpc-reset";
> + reg = <0x98 0x4>;
> + #reset-cells = <1>;
> + status = "disabled";
> + };
> +
> + ibt: ibt@140 {
> + compatible = "aspeed,ast2600-ibt-bmc";
> + reg = <0x140 0x18>;
> + interrupts = <GIC_SPI 143
> IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + sio_regs: regs {
> + compatible = "aspeed,bmc-misc";
> + };
> +
> + mbox: mbox@200 {
> + compatible = "aspeed,ast2600-mbox";
> + reg = <0x200 0x5c>;
> + interrupts = <GIC_SPI 54
> IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <1>;
> + status = "disabled";
> + };
> + };
> +
> + uart2: serial@1e78d000 {
> + compatible = "ns16550a";
> + reg = <0x1e78d000 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART2CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart3: serial@1e78e000 {
> + compatible = "ns16550a";
> + reg = <0x1e78e000 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART3CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart4: serial@1e78f000 {
> + compatible = "ns16550a";
> + reg = <0x1e78f000 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART4CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + i2c: bus@1e78a000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x1e78a000 0x1000>;
> + };
> +
> + fsim0: fsi@1e79b000 {
> + compatible = "aspeed,ast2600-fsi-master",
> "fsi-master";
> + reg = <0x1e79b000 0x94>;
> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fsi1_default>;
> + clocks = <&scu ASPEED_CLK_GATE_FSICLK>;
> + status = "disabled";
> + };
> +
> + fsim1: fsi@1e79b100 {
> + compatible = "aspeed,ast2600-fsi-master",
> "fsi-master";
> + reg = <0x1e79b100 0x94>;
> + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fsi2_default>;
> + clocks = <&scu ASPEED_CLK_GATE_FSICLK>;
> + status = "disabled";
> + };
> +
> + uart6: serial@1e790000 {
> + compatible = "ns16550a";
> + reg = <0x1e790000 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART6CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart7: serial@1e790100 {
> + compatible = "ns16550a";
> + reg = <0x1e790100 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART7CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart8: serial@1e790200 {
> + compatible = "ns16550a";
> + reg = <0x1e790200 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART8CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart9: serial@1e790300 {
> + compatible = "ns16550a";
> + reg = <0x1e790300 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART9CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart10: serial@1e790400 {
> + compatible = "ns16550a";
> + reg = <0x1e790400 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART10CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart11: serial@1e790500 {
> + compatible = "ns16550a";
> + reg = <0x1e790400 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART11CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart12: serial@1e790600 {
> + compatible = "ns16550a";
> + reg = <0x1e790600 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART12CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + uart13: serial@1e790700 {
> + compatible = "ns16550a";
> + reg = <0x1e790700 0x20>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_GATE_UART13CLK>;
> + clock-frequency = <1846154>;
> + no-loopback-test;
> + status = "disabled";
> + };
> +
> + display_port: dp@1e6eb000 {
> + compatible = "aspeed,ast2600-displayport";
> + reg = <0x1e6eb000 0x200>;
> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst ASPEED_RESET_DP> ,<&rst
> ASPEED_RESET_DP_MCU>;
> + status = "disabled";
> + };
> +
> + };
> +
> + };
> +
> +};
> +
> +&i2c {
> + i2cglobal: i2cg@00 {
> + compatible = "aspeed,ast2600-i2c-global";
> + reg = <0x0 0x40>;
> + resets = <&rst ASPEED_RESET_I2C>;
> +#if 0
> + new-mode;
> +#endif
> + };
> +
> + i2c0: i2c@80 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x80 0x80 0xC00 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@100 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x100 0x80 0xC20 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@180 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x180 0x80 0xC40 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + };
> +
> + i2c3: i2c@200 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x200 0x40 0xC60 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + };
> +
> + i2c4: i2c@280 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x280 0x80 0xC80 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + };
> +
> + i2c5: i2c@300 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x300 0x40 0xCA0 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + };
> +
> + i2c6: i2c@380 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x380 0x80 0xCC0 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + };
> +
> + i2c7: i2c@400 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x400 0x80 0xCE0 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + };
> +
> + i2c8: i2c@480 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x480 0x80 0xD00 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + };
> +
> + i2c9: i2c@500 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x500 0x80 0xD20 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + status = "disabled";
> + };
> +
> + i2c10: i2c@580 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x580 0x80 0xD40 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + status = "disabled";
> + };
> +
> + i2c11: i2c@600 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x600 0x80 0xD60 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + status = "disabled";
> + };
> +
> + i2c12: i2c@680 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x680 0x80 0xD80 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + status = "disabled";
> + };
> +
> + i2c13: i2c@700 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x700 0x80 0xDA0 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + status = "disabled";
> + };
> +
> + i2c14: i2c@780 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x780 0x80 0xDC0 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + status = "disabled";
> + };
> +
> + i2c15: i2c@800 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + reg = <0x800 0x80 0xDE0 0x20>;
> + compatible = "aspeed,ast2600-i2c-bus";
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu ASPEED_CLK_APB2>;
> + status = "disabled";
> + };
> +
> +};
> +
> +&pinctrl {
> + pinctrl_fmcquad_default: fmcquad_default {
> + function = "FMCQUAD";
> + groups = "FMCQUAD";
> + };
> +
> + pinctrl_spi1_default: spi1_default {
> + function = "SPI1";
> + groups = "SPI1";
> + };
> +
> + pinctrl_spi1abr_default: spi1abr_default {
> + function = "SPI1ABR";
> + groups = "SPI1ABR";
> + };
> +
> + pinctrl_spi1cs1_default: spi1cs1_default {
> + function = "SPI1CS1";
> + groups = "SPI1CS1";
> + };
> +
> + pinctrl_spi1wp_default: spi1wp_default {
> + function = "SPI1WP";
> + groups = "SPI1WP";
> + };
> +
> + pinctrl_spi1quad_default: spi1quad_default {
> + function = "SPI1QUAD";
> + groups = "SPI1QUAD";
> + };
> +
> + pinctrl_spi2_default: spi2_default {
> + function = "SPI2";
> + groups = "SPI2";
> + };
> +
> + pinctrl_spi2cs1_default: spi2cs1_default {
> + function = "SPI2CS1";
> + groups = "SPI2CS1";
> + };
> +
> + pinctrl_spi2cs2_default: spi2cs2_default {
> + function = "SPI2CS2";
> + groups = "SPI2CS2";
> + };
> +
> + pinctrl_spi2quad_default: spi2quad_default {
> + function = "SPI2QUAD";
> + groups = "SPI2QUAD";
> + };
> +
> + pinctrl_acpi_default: acpi_default {
> + function = "ACPI";
> + groups = "ACPI";
> + };
> +
> + pinctrl_adc0_default: adc0_default {
> + function = "ADC0";
> + groups = "ADC0";
> + };
> +
> + pinctrl_adc1_default: adc1_default {
> + function = "ADC1";
> + groups = "ADC1";
> + };
> +
> + pinctrl_adc10_default: adc10_default {
> + function = "ADC10";
> + groups = "ADC10";
> + };
> +
> + pinctrl_adc11_default: adc11_default {
> + function = "ADC11";
> + groups = "ADC11";
> + };
> +
> + pinctrl_adc12_default: adc12_default {
> + function = "ADC12";
> + groups = "ADC12";
> + };
> +
> + pinctrl_adc13_default: adc13_default {
> + function = "ADC13";
> + groups = "ADC13";
> + };
> +
> + pinctrl_adc14_default: adc14_default {
> + function = "ADC14";
> + groups = "ADC14";
> + };
> +
> + pinctrl_adc15_default: adc15_default {
> + function = "ADC15";
> + groups = "ADC15";
> + };
> +
> + pinctrl_adc2_default: adc2_default {
> + function = "ADC2";
> + groups = "ADC2";
> + };
> +
> + pinctrl_adc3_default: adc3_default {
> + function = "ADC3";
> + groups = "ADC3";
> + };
> +
> + pinctrl_adc4_default: adc4_default {
> + function = "ADC4";
> + groups = "ADC4";
> + };
> +
> + pinctrl_adc5_default: adc5_default {
> + function = "ADC5";
> + groups = "ADC5";
> + };
> +
> + pinctrl_adc6_default: adc6_default {
> + function = "ADC6";
> + groups = "ADC6";
> + };
> +
> + pinctrl_adc7_default: adc7_default {
> + function = "ADC7";
> + groups = "ADC7";
> + };
> +
> + pinctrl_adc8_default: adc8_default {
> + function = "ADC8";
> + groups = "ADC8";
> + };
> +
> + pinctrl_adc9_default: adc9_default {
> + function = "ADC9";
> + groups = "ADC9";
> + };
> +
> + pinctrl_bmcint_default: bmcint_default {
> + function = "BMCINT";
> + groups = "BMCINT";
> + };
> +
> + pinctrl_ddcclk_default: ddcclk_default {
> + function = "DDCCLK";
> + groups = "DDCCLK";
> + };
> +
> + pinctrl_ddcdat_default: ddcdat_default {
> + function = "DDCDAT";
> + groups = "DDCDAT";
> + };
> +
> + pinctrl_espi_default: espi_default {
> + function = "ESPI";
> + groups = "ESPI";
> + };
> +
> + pinctrl_fsi1_default: fsi1_default {
> + function = "FSI1";
> + groups = "FSI1";
> + };
> +
> + pinctrl_fsi2_default: fsi2_default {
> + function = "FSI2";
> + groups = "FSI2";
> + };
> +
> + pinctrl_fwspics1_default: fwspics1_default {
> + function = "FWSPICS1";
> + groups = "FWSPICS1";
> + };
> +
> + pinctrl_fwspics2_default: fwspics2_default {
> + function = "FWSPICS2";
> + groups = "FWSPICS2";
> + };
> +
> + pinctrl_gpid0_default: gpid0_default {
> + function = "GPID0";
> + groups = "GPID0";
> + };
> +
> + pinctrl_gpid2_default: gpid2_default {
> + function = "GPID2";
> + groups = "GPID2";
> + };
> +
> + pinctrl_gpid4_default: gpid4_default {
> + function = "GPID4";
> + groups = "GPID4";
> + };
> +
> + pinctrl_gpid6_default: gpid6_default {
> + function = "GPID6";
> + groups = "GPID6";
> + };
> +
> + pinctrl_gpie0_default: gpie0_default {
> + function = "GPIE0";
> + groups = "GPIE0";
> + };
> +
> + pinctrl_gpie2_default: gpie2_default {
> + function = "GPIE2";
> + groups = "GPIE2";
> + };
> +
> + pinctrl_gpie4_default: gpie4_default {
> + function = "GPIE4";
> + groups = "GPIE4";
> + };
> +
> + pinctrl_gpie6_default: gpie6_default {
> + function = "GPIE6";
> + groups = "GPIE6";
> + };
> +
> + pinctrl_i2c1_default: i2c1_default {
> + function = "I2C1";
> + groups = "I2C1";
> + };
> + pinctrl_i2c2_default: i2c2_default {
> + function = "I2C2";
> + groups = "I2C2";
> + };
> +
> + pinctrl_i2c3_default: i2c3_default {
> + function = "I2C3";
> + groups = "I2C3";
> + };
> +
> + pinctrl_i2c4_default: i2c4_default {
> + function = "I2C4";
> + groups = "I2C4";
> + };
> +
> + pinctrl_i2c5_default: i2c5_default {
> + function = "I2C5";
> + groups = "I2C5";
> + };
> +
> + pinctrl_i2c6_default: i2c6_default {
> + function = "I2C6";
> + groups = "I2C6";
> + };
> +
> + pinctrl_i2c7_default: i2c7_default {
> + function = "I2C7";
> + groups = "I2C7";
> + };
> +
> + pinctrl_i2c8_default: i2c8_default {
> + function = "I2C8";
> + groups = "I2C8";
> + };
> +
> + pinctrl_i2c9_default: i2c9_default {
> + function = "I2C9";
> + groups = "I2C9";
> + };
> +
> + pinctrl_i2c10_default: i2c10_default {
> + function = "I2C10";
> + groups = "I2C10";
> + };
> +
> + pinctrl_i2c11_default: i2c11_default {
> + function = "I2C11";
> + groups = "I2C11";
> + };
> +
> + pinctrl_i2c12_default: i2c12_default {
> + function = "I2C12";
> + groups = "I2C12";
> + };
> +
> + pinctrl_i2c13_default: i2c13_default {
> + function = "I2C13";
> + groups = "I2C13";
> + };
> +
> + pinctrl_i2c14_default: i2c14_default {
> + function = "I2C14";
> + groups = "I2C14";
> + };
> +
> + pinctrl_i2c15_default: i2c15_default {
> + function = "I2C15";
> + groups = "I2C15";
> + };
> +
> + pinctrl_i2c16_default: i2c16_default {
> + function = "I2C16";
> + groups = "I2C16";
> + };
> +
> + pinctrl_lad0_default: lad0_default {
> + function = "LAD0";
> + groups = "LAD0";
> + };
> +
> + pinctrl_lad1_default: lad1_default {
> + function = "LAD1";
> + groups = "LAD1";
> + };
> +
> + pinctrl_lad2_default: lad2_default {
> + function = "LAD2";
> + groups = "LAD2";
> + };
> +
> + pinctrl_lad3_default: lad3_default {
> + function = "LAD3";
> + groups = "LAD3";
> + };
> +
> + pinctrl_lclk_default: lclk_default {
> + function = "LCLK";
> + groups = "LCLK";
> + };
> +
> + pinctrl_lframe_default: lframe_default {
> + function = "LFRAME";
> + groups = "LFRAME";
> + };
> +
> + pinctrl_lpchc_default: lpchc_default {
> + function = "LPCHC";
> + groups = "LPCHC";
> + };
> +
> + pinctrl_lpcpd_default: lpcpd_default {
> + function = "LPCPD";
> + groups = "LPCPD";
> + };
> +
> + pinctrl_lpcplus_default: lpcplus_default {
> + function = "LPCPLUS";
> + groups = "LPCPLUS";
> + };
> +
> + pinctrl_lpcpme_default: lpcpme_default {
> + function = "LPCPME";
> + groups = "LPCPME";
> + };
> +
> + pinctrl_lpcrst_default: lpcrst_default {
> + function = "LPCRST";
> + groups = "LPCRST";
> + };
> +
> + pinctrl_lpcsmi_default: lpcsmi_default {
> + function = "LPCSMI";
> + groups = "LPCSMI";
> + };
> +
> + pinctrl_lsirq_default: lsirq_default {
> + function = "LSIRQ";
> + groups = "LSIRQ";
> + };
> +
> + pinctrl_mac1link_default: mac1link_default {
> + function = "MAC1LINK";
> + groups = "MAC1LINK";
> + };
> +
> + pinctrl_mac2link_default: mac2link_default {
> + function = "MAC2LINK";
> + groups = "MAC2LINK";
> + };
> +
> + pinctrl_mac3link_default: mac3link_default {
> + function = "MAC3LINK";
> + groups = "MAC3LINK";
> + };
> +
> + pinctrl_mac4link_default: mac4link_default {
> + function = "MAC4LINK";
> + groups = "MAC4LINK";
> + };
> +
> + pinctrl_mdio1_default: mdio1_default {
> + function = "MDIO1";
> + groups = "MDIO1";
> + };
> +
> + pinctrl_mdio2_default: mdio2_default {
> + function = "MDIO2";
> + groups = "MDIO2";
> + };
> +
> + pinctrl_mdio3_default: mdio3_default {
> + function = "MDIO3";
> + groups = "MDIO3";
> + };
> +
> + pinctrl_mdio4_default: mdio4_default {
> + function = "MDIO4";
> + groups = "MDIO4";
> + };
> +
> + pinctrl_rmii1_default: rmii1_default {
> + function = "RMII1";
> + groups = "RMII1";
> + };
> +
> + pinctrl_rmii2_default: rmii2_default {
> + function = "RMII2";
> + groups = "RMII2";
> + };
> +
> + pinctrl_rmii3_default: rmii3_default {
> + function = "RMII3";
> + groups = "RMII3";
> + };
> +
> + pinctrl_rmii4_default: rmii4_default {
> + function = "RMII4";
> + groups = "RMII4";
> + };
> +
> + pinctrl_rmii1rclk_default: rmii1rclk_default {
> + function = "RMII1RCLK";
> + groups = "RMII1RCLK";
> + };
> +
> + pinctrl_rmii2rclk_default: rmii2rclk_default {
> + function = "RMII2RCLK";
> + groups = "RMII2RCLK";
> + };
> +
> + pinctrl_rmii3rclk_default: rmii3rclk_default {
> + function = "RMII3RCLK";
> + groups = "RMII3RCLK";
> + };
> +
> + pinctrl_rmii4rclk_default: rmii4rclk_default {
> + function = "RMII4RCLK";
> + groups = "RMII4RCLK";
> + };
> +
> + pinctrl_ncts1_default: ncts1_default {
> + function = "NCTS1";
> + groups = "NCTS1";
> + };
> +
> + pinctrl_ncts2_default: ncts2_default {
> + function = "NCTS2";
> + groups = "NCTS2";
> + };
> +
> + pinctrl_ncts3_default: ncts3_default {
> + function = "NCTS3";
> + groups = "NCTS3";
> + };
> +
> + pinctrl_ncts4_default: ncts4_default {
> + function = "NCTS4";
> + groups = "NCTS4";
> + };
> +
> + pinctrl_ndcd1_default: ndcd1_default {
> + function = "NDCD1";
> + groups = "NDCD1";
> + };
> +
> + pinctrl_ndcd2_default: ndcd2_default {
> + function = "NDCD2";
> + groups = "NDCD2";
> + };
> +
> + pinctrl_ndcd3_default: ndcd3_default {
> + function = "NDCD3";
> + groups = "NDCD3";
> + };
> +
> + pinctrl_ndcd4_default: ndcd4_default {
> + function = "NDCD4";
> + groups = "NDCD4";
> + };
> +
> + pinctrl_ndsr1_default: ndsr1_default {
> + function = "NDSR1";
> + groups = "NDSR1";
> + };
> +
> + pinctrl_ndsr2_default: ndsr2_default {
> + function = "NDSR2";
> + groups = "NDSR2";
> + };
> +
> + pinctrl_ndsr3_default: ndsr3_default {
> + function = "NDSR3";
> + groups = "NDSR3";
> + };
> +
> + pinctrl_ndsr4_default: ndsr4_default {
> + function = "NDSR4";
> + groups = "NDSR4";
> + };
> +
> + pinctrl_ndtr1_default: ndtr1_default {
> + function = "NDTR1";
> + groups = "NDTR1";
> + };
> +
> + pinctrl_ndtr2_default: ndtr2_default {
> + function = "NDTR2";
> + groups = "NDTR2";
> + };
> +
> + pinctrl_ndtr3_default: ndtr3_default {
> + function = "NDTR3";
> + groups = "NDTR3";
> + };
> +
> + pinctrl_ndtr4_default: ndtr4_default {
> + function = "NDTR4";
> + groups = "NDTR4";
> + };
> +
> + pinctrl_nri1_default: nri1_default {
> + function = "NRI1";
> + groups = "NRI1";
> + };
> +
> + pinctrl_nri2_default: nri2_default {
> + function = "NRI2";
> + groups = "NRI2";
> + };
> +
> + pinctrl_nri3_default: nri3_default {
> + function = "NRI3";
> + groups = "NRI3";
> + };
> +
> + pinctrl_nri4_default: nri4_default {
> + function = "NRI4";
> + groups = "NRI4";
> + };
> +
> + pinctrl_nrts1_default: nrts1_default {
> + function = "NRTS1";
> + groups = "NRTS1";
> + };
> +
> + pinctrl_nrts2_default: nrts2_default {
> + function = "NRTS2";
> + groups = "NRTS2";
> + };
> +
> + pinctrl_nrts3_default: nrts3_default {
> + function = "NRTS3";
> + groups = "NRTS3";
> + };
> +
> + pinctrl_nrts4_default: nrts4_default {
> + function = "NRTS4";
> + groups = "NRTS4";
> + };
> +
> + pinctrl_oscclk_default: oscclk_default {
> + function = "OSCCLK";
> + groups = "OSCCLK";
> + };
> +
> + pinctrl_pewake_default: pewake_default {
> + function = "PEWAKE";
> + groups = "PEWAKE";
> + };
> +
> + pinctrl_pnor_default: pnor_default {
> + function = "PNOR";
> + groups = "PNOR";
> + };
> +
> + pinctrl_pwm0_default: pwm0_default {
> + function = "PWM0";
> + groups = "PWM0";
> + };
> +
> + pinctrl_pwm1_default: pwm1_default {
> + function = "PWM1";
> + groups = "PWM1";
> + };
> +
> + pinctrl_pwm2_default: pwm2_default {
> + function = "PWM2";
> + groups = "PWM2";
> + };
> +
> + pinctrl_pwm3_default: pwm3_default {
> + function = "PWM3";
> + groups = "PWM3";
> + };
> +
> + pinctrl_pwm4_default: pwm4_default {
> + function = "PWM4";
> + groups = "PWM4";
> + };
> +
> + pinctrl_pwm5_default: pwm5_default {
> + function = "PWM5";
> + groups = "PWM5";
> + };
> +
> + pinctrl_pwm6_default: pwm6_default {
> + function = "PWM6";
> + groups = "PWM6";
> + };
> +
> + pinctrl_pwm7_default: pwm7_default {
> + function = "PWM7";
> + groups = "PWM7";
> + };
> +
> + pinctrl_rgmii1_default: rgmii1_default {
> + function = "RGMII1";
> + groups = "RGMII1";
> + };
> +
> + pinctrl_rgmii2_default: rgmii2_default {
> + function = "RGMII2";
> + groups = "RGMII2";
> + };
> +
> + pinctrl_rgmii3_default: rgmii3_default {
> + function = "RGMII3";
> + groups = "RGMII3";
> + };
> +
> + pinctrl_rgmii4_default: rgmii4_default {
> + function = "RGMII4";
> + groups = "RGMII4";
> + };
> +
> + pinctrl_rmii1_default: rmii1_default {
> + function = "RMII1";
> + groups = "RMII1";
> + };
> +
> + pinctrl_rmii2_default: rmii2_default {
> + function = "RMII2";
> + groups = "RMII2";
> + };
> +
> + pinctrl_rxd1_default: rxd1_default {
> + function = "RXD1";
> + groups = "RXD1";
> + };
> +
> + pinctrl_rxd2_default: rxd2_default {
> + function = "RXD2";
> + groups = "RXD2";
> + };
> +
> + pinctrl_rxd3_default: rxd3_default {
> + function = "RXD3";
> + groups = "RXD3";
> + };
> +
> + pinctrl_rxd4_default: rxd4_default {
> + function = "RXD4";
> + groups = "RXD4";
> + };
> +
> + pinctrl_salt1_default: salt1_default {
> + function = "SALT1";
> + groups = "SALT1";
> + };
> +
> + pinctrl_salt10_default: salt10_default {
> + function = "SALT10";
> + groups = "SALT10";
> + };
> +
> + pinctrl_salt11_default: salt11_default {
> + function = "SALT11";
> + groups = "SALT11";
> + };
> +
> + pinctrl_salt12_default: salt12_default {
> + function = "SALT12";
> + groups = "SALT12";
> + };
> +
> + pinctrl_salt13_default: salt13_default {
> + function = "SALT13";
> + groups = "SALT13";
> + };
> +
> + pinctrl_salt14_default: salt14_default {
> + function = "SALT14";
> + groups = "SALT14";
> + };
> +
> + pinctrl_salt2_default: salt2_default {
> + function = "SALT2";
> + groups = "SALT2";
> + };
> +
> + pinctrl_salt3_default: salt3_default {
> + function = "SALT3";
> + groups = "SALT3";
> + };
> +
> + pinctrl_salt4_default: salt4_default {
> + function = "SALT4";
> + groups = "SALT4";
> + };
> +
> + pinctrl_salt5_default: salt5_default {
> + function = "SALT5";
> + groups = "SALT5";
> + };
> +
> + pinctrl_salt6_default: salt6_default {
> + function = "SALT6";
> + groups = "SALT6";
> + };
> +
> + pinctrl_salt7_default: salt7_default {
> + function = "SALT7";
> + groups = "SALT7";
> + };
> +
> + pinctrl_salt8_default: salt8_default {
> + function = "SALT8";
> + groups = "SALT8";
> + };
> +
> + pinctrl_salt9_default: salt9_default {
> + function = "SALT9";
> + groups = "SALT9";
> + };
> +
> + pinctrl_scl1_default: scl1_default {
> + function = "SCL1";
> + groups = "SCL1";
> + };
> +
> + pinctrl_scl2_default: scl2_default {
> + function = "SCL2";
> + groups = "SCL2";
> + };
> +
> + pinctrl_sd1_default: sd1_default {
> + function = "SD1";
> + groups = "SD1";
> + };
> +
> + pinctrl_sd2_default: sd2_default {
> + function = "SD2";
> + groups = "SD2";
> + };
> +
> + pinctrl_emmc_default: emmc_default {
> + function = "EMMC";
> + groups = "EMMC";
> + };
> +
> + pinctrl_emmcg8_default: emmcg8_default {
> + function = "EMMCG8";
> + groups = "EMMCG8";
> + };
> +
> + pinctrl_sda1_default: sda1_default {
> + function = "SDA1";
> + groups = "SDA1";
> + };
> +
> + pinctrl_sda2_default: sda2_default {
> + function = "SDA2";
> + groups = "SDA2";
> + };
> +
> + pinctrl_sgps1_default: sgps1_default {
> + function = "SGPS1";
> + groups = "SGPS1";
> + };
> +
> + pinctrl_sgps2_default: sgps2_default {
> + function = "SGPS2";
> + groups = "SGPS2";
> + };
> +
> + pinctrl_sioonctrl_default: sioonctrl_default {
> + function = "SIOONCTRL";
> + groups = "SIOONCTRL";
> + };
> +
> + pinctrl_siopbi_default: siopbi_default {
> + function = "SIOPBI";
> + groups = "SIOPBI";
> + };
> +
> + pinctrl_siopbo_default: siopbo_default {
> + function = "SIOPBO";
> + groups = "SIOPBO";
> + };
> +
> + pinctrl_siopwreq_default: siopwreq_default {
> + function = "SIOPWREQ";
> + groups = "SIOPWREQ";
> + };
> +
> + pinctrl_siopwrgd_default: siopwrgd_default {
> + function = "SIOPWRGD";
> + groups = "SIOPWRGD";
> + };
> +
> + pinctrl_sios3_default: sios3_default {
> + function = "SIOS3";
> + groups = "SIOS3";
> + };
> +
> + pinctrl_sios5_default: sios5_default {
> + function = "SIOS5";
> + groups = "SIOS5";
> + };
> +
> + pinctrl_siosci_default: siosci_default {
> + function = "SIOSCI";
> + groups = "SIOSCI";
> + };
> +
> + pinctrl_spi1_default: spi1_default {
> + function = "SPI1";
> + groups = "SPI1";
> + };
> +
> + pinctrl_spi1cs1_default: spi1cs1_default {
> + function = "SPI1CS1";
> + groups = "SPI1CS1";
> + };
> +
> + pinctrl_spi1debug_default: spi1debug_default {
> + function = "SPI1DEBUG";
> + groups = "SPI1DEBUG";
> + };
> +
> + pinctrl_spi1passthru_default: spi1passthru_default {
> + function = "SPI1PASSTHRU";
> + groups = "SPI1PASSTHRU";
> + };
> +
> + pinctrl_spi2ck_default: spi2ck_default {
> + function = "SPI2CK";
> + groups = "SPI2CK";
> + };
> +
> + pinctrl_spi2cs0_default: spi2cs0_default {
> + function = "SPI2CS0";
> + groups = "SPI2CS0";
> + };
> +
> + pinctrl_spi2cs1_default: spi2cs1_default {
> + function = "SPI2CS1";
> + groups = "SPI2CS1";
> + };
> +
> + pinctrl_spi2miso_default: spi2miso_default {
> + function = "SPI2MISO";
> + groups = "SPI2MISO";
> + };
> +
> + pinctrl_spi2mosi_default: spi2mosi_default {
> + function = "SPI2MOSI";
> + groups = "SPI2MOSI";
> + };
> +
> + pinctrl_timer3_default: timer3_default {
> + function = "TIMER3";
> + groups = "TIMER3";
> + };
> +
> + pinctrl_timer4_default: timer4_default {
> + function = "TIMER4";
> + groups = "TIMER4";
> + };
> +
> + pinctrl_timer5_default: timer5_default {
> + function = "TIMER5";
> + groups = "TIMER5";
> + };
> +
> + pinctrl_timer6_default: timer6_default {
> + function = "TIMER6";
> + groups = "TIMER6";
> + };
> +
> + pinctrl_timer7_default: timer7_default {
> + function = "TIMER7";
> + groups = "TIMER7";
> + };
> +
> + pinctrl_timer8_default: timer8_default {
> + function = "TIMER8";
> + groups = "TIMER8";
> + };
> +
> + pinctrl_txd1_default: txd1_default {
> + function = "TXD1";
> + groups = "TXD1";
> + };
> +
> + pinctrl_txd2_default: txd2_default {
> + function = "TXD2";
> + groups = "TXD2";
> + };
> +
> + pinctrl_txd3_default: txd3_default {
> + function = "TXD3";
> + groups = "TXD3";
> + };
> +
> + pinctrl_txd4_default: txd4_default {
> + function = "TXD4";
> + groups = "TXD4";
> + };
> +
> + pinctrl_uart6_default: uart6_default {
> + function = "UART6";
> + groups = "UART6";
> + };
> +
> + pinctrl_usbcki_default: usbcki_default {
> + function = "USBCKI";
> + groups = "USBCKI";
> + };
> +
> + pinctrl_usb2ah_default: usb2ah_default {
> + function = "USB2AH";
> + groups = "USB2AH";
> + };
> +
> + pinctrl_usb11bhid_default: usb11bhid_default {
> + function = "USB11BHID";
> + groups = "USB11BHID";
> + };
> +
> + pinctrl_usb2bh_default: usb2bh_default {
> + function = "USB2BH";
> + groups = "USB2BH";
> + };
> +
> + pinctrl_vgabiosrom_default: vgabiosrom_default {
> + function = "VGABIOSROM";
> + groups = "VGABIOSROM";
> + };
> +
> + pinctrl_vgahs_default: vgahs_default {
> + function = "VGAHS";
> + groups = "VGAHS";
> + };
> +
> + pinctrl_vgavs_default: vgavs_default {
> + function = "VGAVS";
> + groups = "VGAVS";
> + };
> +
> + pinctrl_vpi24_default: vpi24_default {
> + function = "VPI24";
> + groups = "VPI24";
> + };
> +
> + pinctrl_vpo_default: vpo_default {
> + function = "VPO";
> + groups = "VPO";
> + };
> +
> + pinctrl_wdtrst1_default: wdtrst1_default {
> + function = "WDTRST1";
> + groups = "WDTRST1";
> + };
> +
> + pinctrl_wdtrst2_default: wdtrst2_default {
> + function = "WDTRST2";
> + groups = "WDTRST2";
> + };
> +
> + pinctrl_pcie0rc_default: pcie0rc_default {
> + function = "PCIE0RC";
> + groups = "PCIE0RC";
> + };
> +
> + pinctrl_pcie1rc_default: pcie1rc_default {
> + function = "PCIE1RC";
> + groups = "PCIE1RC";
> + };
> +};
> --
> 2.17.1
