Hi Simon Thanks you for reviewing it.
在 2021/1/14 23:42, Simon Glass 写道:
Hi Shawn, On Thu, 14 Jan 2021 at 01:15, Shawn Lin <shawn....@rock-chips.com> wrote:
----8<------
+ +static int rockchip_pcie_init_port(struct udevice *dev) +{ + int ret; + u32 val; + struct rk_pcie *priv = dev_get_priv(dev); + + /* Set power and maybe external ref clk input */ + if (priv->vpcie3v3) { + ret = regulator_set_value(priv->vpcie3v3, 3300000);Is there an autoset option for this so this info can go in the device tree instead?
I think we should control this by driver as other PCIe drivers did, as we can't guarantee all kernel dtbs doing the right thing and 3v3 power is very important for both of devices and PHY block.
+ if (ret) { + dev_err(priv->dev, "failed to enable vpcie3v3 (ret=%d)\n", + ret); + return ret;
....
Regards, Simon
