Using the internal vs. external pull resistors it is possible to get
27 different combinations from 3 strapping pins. Add an implementation
of this.
This involves updating the sandbox GPIO driver to model external and
(weaker) internal pull resistors. The get_value() method now takes account
of what is driving a pin:
sandbox: GPIOD_EXT_DRIVEN - in which case GPIO_EXT_HIGH provides the
value
outside source - in which case GPIO_EXT_PULL_UP/DOWN indicates the
external state and we work the final state using those flags and
the internal GPIOD_PULL_UP/DOWN flags
Of course the outside source does not really exist in sandbox. We are just
modelling it for test purpose.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/sandbox/include/asm/gpio.h | 5 +-
drivers/gpio/gpio-uclass.c | 78 ++++++++++++++++++++++++++
drivers/gpio/sandbox.c | 13 +++--
include/asm-generic/gpio.h | 37 +++++++++++++
test/dm/gpio.c | 98 +++++++++++++++++++++++++++++++++
5 files changed, 226 insertions(+), 5 deletions(-)
diff --git a/arch/sandbox/include/asm/gpio.h b/arch/sandbox/include/asm/gpio.h
index edf78cb4131..097abfb299c 100644
--- a/arch/sandbox/include/asm/gpio.h
+++ b/arch/sandbox/include/asm/gpio.h
@@ -26,8 +26,11 @@
/* Our own private GPIO flags, which musn't conflict with GPIOD_... */
#define GPIOD_EXT_HIGH BIT(20) /* external source is high (else low) */
#define GPIOD_EXT_DRIVEN BIT(21) /* external source is driven */
+#define GPIOD_EXT_PULL_UP BIT(22) /* GPIO has external pull-up */
+#define GPIOD_EXT_PULL_DOWN BIT(23) /* GPIO has external pull-down */
-#define GPIOD_SANDBOX_MASK GENMASK(21, 20)
+#define GPIOD_EXT_PULL (BIT(21) | BIT(22))
+#define GPIOD_SANDBOX_MASK GENMASK(23, 20)
/**
* Return the simulated value of a GPIO (used only in sandbox test code)
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index 77b40263bbd..984c07d1dfa 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -3,6 +3,8 @@
* Copyright (c) 2013 Google, Inc
*/
+#define LOG_CATEGORY UCLASS_GPIO
+
#include <common.h>
#include <dm.h>
#include <log.h>
@@ -20,6 +22,7 @@
#include <dm/device_compat.h>
#include <linux/bug.h>
#include <linux/ctype.h>
+#include <linux/delay.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -708,6 +711,21 @@ int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong
flags)
return dm_gpio_clrset_flags(desc, 0, flags);
}
+int dm_gpios_clrset_flags(struct gpio_desc *desc, int count, ulong clr,
+ ulong set)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ ret = dm_gpio_clrset_flags(&desc[i], clr, set);
+ if (ret)
+ return log_ret(ret);
+ }
+
+ return 0;
+}
+
int dm_gpio_get_flags(struct gpio_desc *desc, ulong *flagsp)
{
struct udevice *dev = desc->dev;
@@ -974,6 +992,66 @@ int dm_gpio_get_values_as_int(const struct gpio_desc
*desc_list, int count)
return vector;
}
+int dm_gpio_get_values_as_int_base3(struct gpio_desc *desc_list,
+ int count)
+{
+ static const char tristate[] = "01z";
+ enum {
+ PULLUP,
+ PULLDOWN,
+
+ NUM_OPTIONS,
+ };
+ int vals[NUM_OPTIONS];
+ uint mask;
+ uint vector = 0;
+ int ret, i;
+
+ for (i = 0; i < NUM_OPTIONS; i++) {
+ uint flags = GPIOD_IS_IN;
+
+ flags |= (i == PULLDOWN) ? GPIOD_PULL_DOWN : GPIOD_PULL_UP;
+ ret = dm_gpios_clrset_flags(desc_list, count, GPIOD_MASK_PULL,
+ flags);
+ if (ret)
+ return log_msg_ret("pu", ret);
+
+ /* Give the lines time to settle */
+ udelay(10);
+
+ ret = dm_gpio_get_values_as_int(desc_list, count);
+ if (ret < 0)
+ return log_msg_ret("get1", ret);
+ vals[i] = ret;
+ }
+
+ log_debug("values: %x %x, count = %d\n", vals[0], vals[1], count);
+ for (i = count - 1, mask = 1 << i; i >= 0; i--, mask >>= 1) {
+ uint pd = vals[PULLDOWN] & mask ? 1 : 0;
+ uint pu = vals[PULLUP] & mask ? 1 : 0;
+ uint digit;
+
+ /*
+ * Get value with internal pulldown active. If this is 1 then
+ * there is a stronger external pullup, which we call 1. If not
+ * then call it 0.
+ */
+ digit = pd;
+
+ /*
+ * If the values differ then the pin is floating so we call
+ * this a 2.
+ */
+ if (pu != pd)
+ digit |= 2;
+ log_debug("%c ", tristate[digit]);
+ vector = 3 * vector + digit;
+ }
+ log_debug("vector=%d\n", vector);
+
+ return vector;
+}
+
/**
* gpio_request_tail: common work for requesting a gpio.
*
diff --git a/drivers/gpio/sandbox.c b/drivers/gpio/sandbox.c
index b32f7ac529b..56b339f5e3c 100644
--- a/drivers/gpio/sandbox.c
+++ b/drivers/gpio/sandbox.c
@@ -19,7 +19,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/sandbox-gpio.h>
-
struct gpio_state {
const char *label; /* label given by requester */
ulong flags; /* flags (GPIOD_...) */
@@ -81,10 +80,16 @@ int sandbox_gpio_get_value(struct udevice *dev, unsigned
offset)
if (get_gpio_flag(dev, offset, GPIOD_IS_OUT))
debug("sandbox_gpio: get_value on output gpio %u\n", offset);
- if (state->flags & GPIOD_EXT_DRIVEN)
+ if (state->flags & GPIOD_EXT_DRIVEN) {
val = state->flags & GPIOD_EXT_HIGH;
- else
- val = false;
+ } else {
+ if (state->flags & GPIOD_EXT_PULL_UP)
+ val = true;
+ else if (state->flags & GPIOD_EXT_PULL_DOWN)
+ val = false;
+ else
+ val = state->flags & GPIOD_PULL_UP;
+ }
return val;
}
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 4628d937259..1cf81a3fc7a 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -505,6 +505,28 @@ int gpio_get_values_as_int(const int *gpio_list);
*/
int dm_gpio_get_values_as_int(const struct gpio_desc *desc_list, int count);
+/**
+ * dm_gpio_get_values_as_int_base3() - Create a base-3 int from a list of GPIOs
+ *
+ * This uses pull-ups/pull-downs to figure out whether a GPIO line is
externally
+ * pulled down, pulled up or floating. This allows three different strap values
+ * for each pin.
+ *
+ * With this it is possible to obtain more combinations from the same number of
+ * strapping pins, when compared to dm_gpio_get_values_as_int(). The external
+ * pull resistors should be made stronger that the internal SoC pull resistors,
+ * for this to work.
+ *
+ * With 2 pins, 6 combinations are possible, compare with 4
+ * With 3 pins, 27 are possible, compared with 8
+ *
+ * @desc_list: List of GPIOs to collect
+ * @count: Number of GPIOs
+ * @return resulting integer value, or -ve on error
+ */
+int dm_gpio_get_values_as_int_base3(struct gpio_desc *desc_list,
+ int count);
+
/**
* gpio_claim_vector() - claim a number of GPIOs for input
*
@@ -722,6 +744,21 @@ int dm_gpio_clrset_flags(struct gpio_desc *desc, ulong
clr, ulong set);
*/
int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags);
+/**
+ * dm_gpios_clrset_flags() - Sets flags for a set of GPIOs
+ *
+ * This clears and sets flags individually for each GPIO.
+ *
+ * @desc: List of GPIOs to update
+ * @count: Number of GPIOs in the list
+ * @clr: Flags to clear (GPIOD_...), e.g. GPIOD_MASK_DIR if you are
+ * changing the direction
+ * @set: Flags to set (GPIOD_...)
+ * @return 0 if OK, -ve on error
+ */
+int dm_gpios_clrset_flags(struct gpio_desc *desc, int count, ulong clr,
+ ulong set);
+
/**
* dm_gpio_get_flags() - Get direction flags
*
diff --git a/test/dm/gpio.c b/test/dm/gpio.c
index eaf78e9aed8..726c1b6c44f 100644
--- a/test/dm/gpio.c
+++ b/test/dm/gpio.c
@@ -673,3 +673,101 @@ static int dm_test_clrset_flags_invert(struct
unit_test_state *uts)
return 0;
}
DM_TEST(dm_test_clrset_flags_invert, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
+static int set_gpios(struct unit_test_state *uts, struct gpio_desc *desc,
+ int count, uint value)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ const uint mask = 1 << i;
+
+ ut_assertok(sandbox_gpio_set_value(desc[i].dev, desc[i].offset,
+ value & mask));
+ }
+
+ return 0;
+}
+
+/* Check that an active-low GPIO works as expected */
+static int dm_test_gpio_get_values_as_int(struct unit_test_state *uts)
+{
+ const int gpio_count = 3;
+ struct gpio_desc desc[gpio_count];
+ struct udevice *dev;
+
+ ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev));
+ ut_asserteq_str("a-test", dev->name);
+
+ ut_asserteq(3, gpio_request_list_by_name(dev, "test-gpios", desc,
+ gpio_count, GPIOD_IS_IN));
+ ut_assertok(set_gpios(uts, desc, gpio_count, 0));
+ ut_asserteq(0, dm_gpio_get_values_as_int(desc, gpio_count));
+
+ ut_assertok(set_gpios(uts, desc, gpio_count, 5));
+ ut_asserteq(5, dm_gpio_get_values_as_int(desc, gpio_count));
+
+ ut_assertok(set_gpios(uts, desc, gpio_count, 7));
+ ut_asserteq(7, dm_gpio_get_values_as_int(desc, gpio_count));
+
+ return 0;
+}
+DM_TEST(dm_test_gpio_get_values_as_int,
+ UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
+/* Check that an active-low GPIO works as expected */
+static int dm_test_gpio_get_values_as_int_base3(struct unit_test_state *uts)
+{
+ const int gpio_count = 3;
+ struct gpio_desc desc[gpio_count];
+ struct udevice *dev;
+
+ ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev));
+ ut_asserteq_str("a-test", dev->name);
+
+ ut_asserteq(3, gpio_request_list_by_name(dev, "test-gpios", desc,
+ gpio_count, GPIOD_IS_IN));
+
+ /*
+ * First test the sandbox GPIO driver works as expected. The external
+ * pull resistor should be stronger than the internal one.
+ */
+ sandbox_gpio_set_flags(desc[0].dev, desc[0].offset,
+ GPIOD_IS_IN | GPIOD_EXT_PULL_UP | GPIOD_PULL_UP);
+ ut_asserteq(1, dm_gpio_get_value(desc));
+
+ sandbox_gpio_set_flags(desc[0].dev, desc[0].offset, GPIOD_IS_IN |
+ GPIOD_EXT_PULL_DOWN | GPIOD_PULL_UP);
+ ut_asserteq(0, dm_gpio_get_value(desc));
+
+ sandbox_gpio_set_flags(desc[0].dev, desc[0].offset,
+ GPIOD_IS_IN | GPIOD_PULL_UP);
+ ut_asserteq(1, dm_gpio_get_value(desc));
+
+ sandbox_gpio_set_flags(desc[0].dev, desc[0].offset, GPIOD_PULL_DOWN);
+ ut_asserteq(0, dm_gpio_get_value(desc));
+
+ /*
+ * Set up pins: pull-up (1), pull-down (0) and floating (2). This should
+ * result in digits 2 0 1, i.e. 2 * 9 + 1 * 3 = 19
+ */
+ sandbox_gpio_set_flags(desc[0].dev, desc[0].offset, GPIOD_EXT_PULL_UP);
+ sandbox_gpio_set_flags(desc[1].dev, desc[1].offset,
+ GPIOD_EXT_PULL_DOWN);
+ sandbox_gpio_set_flags(desc[2].dev, desc[2].offset, 0);
+ ut_asserteq(19, dm_gpio_get_values_as_int_base3(desc, gpio_count));
+
+ /*
+ * Set up pins: floating (2), pull-up (1) and pull-down (0). This should
+ * result in digits 0 1 2, i.e. 1 * 3 + 2 = 5
+ */
+ sandbox_gpio_set_flags(desc[0].dev, desc[0].offset, 0);
+ sandbox_gpio_set_flags(desc[1].dev, desc[1].offset, GPIOD_EXT_PULL_UP);
+ sandbox_gpio_set_flags(desc[2].dev, desc[2].offset,
+ GPIOD_EXT_PULL_DOWN);
+ ut_asserteq(5, dm_gpio_get_values_as_int_base3(desc, gpio_count));
+
+ return 0;
+}
+DM_TEST(dm_test_gpio_get_values_as_int_base3,
+ UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
--
2.30.0.284.gd98b1dd5eaa7-goog
