>-----Original Message----- >From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Aleksandar >Gerasimovski >Sent: Wednesday, January 13, 2021 9:51 PM >To: u-boot@lists.denx.de >Cc: Valentin Longchamp <valentin.longch...@hitachi-powergrids.com>; Holger >Brunck <holger.bru...@hitachi-powergrids.com>; Rainer Boschung ><rainer.bosch...@hitachi-powergrids.com>; Matteo Ghidoni ><matteo.ghid...@hitachi-powergrids.com> >Subject: [PATCH 4/4] board: keymile: add support for seli8 design based on nxp >ls102x soc > Please trim subject to 60 characters
>The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and >FOX product lines. > >It is based on NXP LS1021 SoC and it provides following interfaces: > - IFC interface for NOR, NAND and external FPGA's > - 1 x RGMII ETH for debug purposes > - 2 x SGMII ETH for management communication via back-plane > - 1 x uQE HDLC for management communication via back-plane > - 1 x I2C for peripheral devices > - 1 x SPI for peripheral devices > - 1 x UART for debug logging > >It is foreseen that the design will be later re-used for another XMC and FOX >service cards with similar SoC requirements. > >Signed-off-by: Rainer Boschung <rainer.bosch...@hitachi-powergrids.com> >Signed-off-by: Matteo Ghidoni <matteo.ghid...@hitachi-powergrids.com> >Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi- >powergrids.com> >--- > arch/arm/Kconfig | 19 ++ > arch/arm/dts/Makefile | 2 + > arch/arm/dts/ls1021a-pg-wcom-seli8.dts | 111 +++++++++ > board/keymile/Kconfig | 23 +- > board/keymile/common/ivm.c | 19 +- > board/keymile/pg-wcom-ls102xa/Kconfig | 19 ++ > board/keymile/pg-wcom-ls102xa/MAINTAINERS | 10 + > board/keymile/pg-wcom-ls102xa/Makefile | 11 + > board/keymile/pg-wcom-ls102xa/ddr.c | 90 +++++++ > board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c | 160 ++++++++++++ > configs/pg_wcom_seli8_defconfig | 63 +++++ > include/configs/km/pg-wcom-ls102xa.h | 309 >++++++++++++++++++++++++ > include/configs/pg-wcom-seli8.h | 45 ++++ > 13 files changed, 870 insertions(+), 11 deletions(-) create mode 100644 >arch/arm/dts/ls1021a-pg-wcom-seli8.dts > create mode 100644 board/keymile/pg-wcom-ls102xa/Kconfig > create mode 100644 board/keymile/pg-wcom-ls102xa/MAINTAINERS > create mode 100644 board/keymile/pg-wcom-ls102xa/Makefile > create mode 100644 board/keymile/pg-wcom-ls102xa/ddr.c > create mode 100644 board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c > create mode 100644 configs/pg_wcom_seli8_defconfig create mode 100644 >include/configs/km/pg-wcom-ls102xa.h > create mode 100644 include/configs/pg-wcom-seli8.h > <snip> Regards Priyank