properly indent the help text and use single quotes consistently to mark
variable parameters.
Signed-off-by: Bernhard Kirchen <bernhard.kirc...@mbconnectline.com>
---
cmd/sf.c | 48 ++++++++++++++++++++++--------------------------
1 file changed, 22 insertions(+), 26 deletions(-)
diff --git a/cmd/sf.c b/cmd/sf.c
index c0d6a8f8a0..a991ae0d03 100644
--- a/cmd/sf.c
+++ b/cmd/sf.c
@@ -564,7 +564,7 @@ static int do_spi_flash(struct cmd_tbl *cmdtp, int flag,
int argc,
/* The remaining commands require a selected device */
if (!flash) {
- puts("No SPI flash selected. Please run `sf probe'\n");
+ puts("No SPI flash selected. Please run 'sf probe'\n");
return 1;
}
@@ -590,31 +590,27 @@ usage:
return CMD_RET_USAGE;
}
-#ifdef CONFIG_CMD_SF_TEST
-#define SF_TEST_HELP "\nsf test offset len " \
- "- run a very basic destructive test"
-#else
-#define SF_TEST_HELP
-#endif
-
U_BOOT_CMD(
- sf, 5, 1, do_spi_flash,
+ sf, 5, 1, do_spi_flash,
"SPI flash sub-system",
- "probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n"
- " and chip select\n"
- "sf read addr offset|partition len - read `len' bytes starting
at\n"
- " `offset' or from start of
mtd\n"
- " `partition'to memory at
`addr'\n"
- "sf write addr offset|partition len - write `len' bytes from
memory\n"
- " at `addr' to flash at
`offset'\n"
- " or to start of mtd
`partition'\n"
- "sf erase offset|partition [+]len - erase `len' bytes from
`offset'\n"
- " or from start of mtd
`partition'\n"
- " `+len' round up `len' to block
size\n"
- "sf update addr offset|partition len - erase and write `len' bytes
from memory\n"
- " at `addr' to flash at
`offset'\n"
- " or to start of mtd
`partition'\n"
- "sf protect lock/unlock sector len - protect/unprotect 'len' bytes
starting\n"
- " at address 'sector'\n"
- SF_TEST_HELP
+ "probe [[bus:]cs] [hz] [mode] - init flash device on given
SPI bus\n"
+ " and chip select\n"
+ "sf read addr offset|partition len - read 'len' bytes starting
at\n"
+ " 'offset' or from start of
mtd\n"
+ " 'partition' to memory at
'addr'\n"
+ "sf write addr offset|partition len - write 'len' bytes from
memory\n"
+ " at 'addr' to flash at
'offset'\n"
+ " or to start of mtd
'partition'\n"
+ "sf erase offset|partition [+]len - erase 'len' bytes from
'offset'\n"
+ " or from start of mtd
'partition'.\n"
+ " '+len' round up 'len' to
block size\n"
+ "sf update addr offset|partition len - erase and write 'len' bytes
from memory\n"
+ " at 'addr' to flash at
'offset'\n"
+ " or to start of mtd
'partition'\n"
+ "sf protect lock|unlock sector len - protect/unprotect 'len' bytes
starting\n"
+ " at address 'sector'\n"
+#ifdef CONFIG_CMD_SF_TEST
+ "sf test offset len - run a very basic destructive
test\n"
+ " ranging 'len' bytes from
'offset'\n"
+#endif
);
--
2.29.2
