The u-boot-with-spl.imx is a concatenation of SPL and u-boot.uim.
The u-boot.uim is u-boot.bin wrapped in uImage. In case OF_SEPARATE
is enabled, the u-boot.bin does not contain control DT for U-Boot,
and so u-boot.uim does not contain the DT, and so u-boot-with-spl.imx
does not contain the DT, and a system where u-boot-with-spl.imx is
written to offset 1024B to the start of storage no longer boots, as
it is missing DT.
In case OF_SEPARATE is enabled, u-boot.img contains both u-boot.bin
and the necessary DTs. Therefore, use u-boot.img instead of u-boot.uim
to generate u-boot-with-spl.imx when OF_SEPARATE is enabled.
Tested-by: Fabio Estevam <feste...@gmail.com>
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Christoph Niedermaier <cniederma...@dh-electronics.de>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Stefano Babic <sba...@denx.de>
Cc: Ye Li <ye...@nxp.com>
Cc: uboot-imx <uboot-...@nxp.com>
---
arch/arm/mach-imx/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 1aa26a50ad8..81159eabd24 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@
quiet_cmd_pad_cat = CAT $@
cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
-u-boot-with-spl.imx: SPL u-boot.uim FORCE
+u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.uim,u-boot.img)
FORCE
$(call if_changed,pad_cat)
-u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE
+u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if
$(CONFIG_OF_SEPARATE),u-boot.uim,u-boot.img) FORCE
$(call if_changed,pad_cat)
quiet_cmd_u-boot-nand-spl_imx = GEN $@
--
2.29.2
