Hello Fabio, Am 01.02.21 um 18:40 schrieb Fabio Estevam: > On Mon, Feb 1, 2021 at 1:36 PM Marek Vasut <ma...@denx.de> wrote: > >> I don't think WB uses OF_SEPARATE with fitImages, so maybe there its not >> applicable at all ? > > Wandboard does use OF_SEPARATE and FIT. > > I have just tested flashing u-boot-with-spl.imx into a SD card and > booting a wandboard. > > It does behave the same as mx6sabresd: > > - Fails to boot without your patch > - Boots fine with your patch > > So, yes, wandboard can be used to test u-boot-with-spl.imx and avoid > future regressions in Heiko's boot farm.
Last build from this morning: http://xeidos.ddns.net/ubtestresults/result/777 You find log here: http://xeidos.ddns.net/ubtestresults/result/files/results/777/tbot.log I use currently SPL and u-boot.img ... seems I have to switch to above image ... currently I have a lot of load on my desk, so may this takes some time ... sorry bye, Heiko [1] extract part "update SPL and u-boot.img on wandboard" from logfile: │ │ ├─[wandboard-uboot] run load_spl │ │ │ ## ethernet@2188000 Waiting for PHY auto negotiation to complete.... done │ │ │ ## Using ethernet@2188000 device │ │ │ ## TFTP from server 192.168.3.1; our IP address is 192.168.3.21 │ │ │ ## Filename 'wandboard/tbot/SPL'. │ │ │ ## Load address: 0x12000000 │ │ │ ## Loading: *#### │ │ │ ## │ │ │ ## 1.6 MiB/s │ │ │ ## │ │ │ ## done │ │ │ ## Bytes transferred = 48128 (bc00 hex) │ │ │ ## │ │ ├─[wandboard-uboot] run upd_spl │ │ │ ## switch to partitions #0, OK │ │ │ ## mmc0 is current device │ │ │ ## │ │ │ ## MMC write: dev # 0, block # 2, count 95 ... 95 blocks written: OK │ │ ├─[wandboard-uboot] run cmp_spl │ │ │ ## Using ethernet@2188000 device │ │ │ ## │ │ │ ## TFTP from server 192.168.3.1; our IP address is 192.168.3.21 │ │ │ ## Filename 'wandboard/tbot/SPL'. │ │ │ ## │ │ │ ## Load address: 0x12000000 │ │ │ ## Loading: *#### │ │ │ ## 2.9 MiB/s │ │ │ ## │ │ │ ## done │ │ │ ## Bytes transferred = 48128 (bc00 hex) │ │ │ ## │ │ │ ## │ │ │ ## │ │ │ ## MMC read: dev # 0, block # 2, count 95 ... 95 blocks read: OK │ │ │ ## │ │ │ ## Total of 48128 byte(s) were the same │ │ │ ## │ │ ├─[wandboard-uboot] run load_ub │ │ │ ## Using ethernet@2188000 device │ │ │ ## │ │ │ ## TFTP from server 192.168.3.1; our IP address is 192.168.3.21 │ │ │ ## Filename 'wandboard/tbot/u-boot.img'. │ │ │ ## │ │ │ ## Load address: 0x12000000 │ │ │ ## Loading: *######################################## │ │ │ ## │ │ │ ## 2.9 MiB/s │ │ │ ## done │ │ │ ## Bytes transferred = 577444 (8cfa4 hex) │ │ │ ## │ │ ├─[wandboard-uboot] run upd_ub │ │ │ ## switch to partitions #0, OK │ │ │ ## mmc0 is current device │ │ │ ## │ │ │ ## MMC write: dev # 0, block # 138, count 1128 ... 1128 blocks written: OK │ │ │ ## │ │ ├─[wandboard-uboot] run cmp_ub │ │ │ ## Using ethernet@2188000 device │ │ │ ## │ │ │ ## TFTP from server 192.168.3.1; our IP address is 192.168.3.21 │ │ │ ## │ │ │ ## Filename 'wandboard/tbot/u-boot.img'. │ │ │ ## Load address: 0x12000000 │ │ │ ## │ │ │ ## Loading: *######################################## │ │ │ ## 2.5 MiB/s │ │ │ ## done │ │ │ ## Bytes transferred = 577444 (8cfa4 hex) │ │ │ ## │ │ │ ## MMC read: dev # 0, block # 138, count 1128 ... 1128 blocks read: OK │ │ │ ## Total of 577444 byte(s) were the same -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de
