These tests currently run in a particular sequence, with some of them
depending on the actions of earlier tests.
Add a check for sandbox and reset to a known state at the start of each
test, so that all tests can run in parallel.
Signed-off-by: Simon Glass <s...@chromium.org>
---
test/py/tests/test_tpm2.py | 52 +++++++++++++++++++++++++++++++++-----
1 file changed, 46 insertions(+), 6 deletions(-)
diff --git a/test/py/tests/test_tpm2.py b/test/py/tests/test_tpm2.py
index 70f906da511..49e7ebfa5bf 100644
--- a/test/py/tests/test_tpm2.py
+++ b/test/py/tests/test_tpm2.py
@@ -40,10 +40,14 @@ def force_init(u_boot_console, force=False):
u_boot_console.run_command('tpm2 clear TPM2_RH_PLATFORM')
u_boot_console.run_command('echo --- end of init ---')
+def is_sandbox(cons):
+ # Array slice removes leading/trailing quotes.
+ sys_arch = cons.config.buildconfig.get('config_sys_arch',
'"sandbox"')[1:-1]
+ return sys_arch == 'sandbox'
+
@pytest.mark.buildconfigspec('cmd_tpm_v2')
def test_tpm2_init(u_boot_console):
"""Init the software stack to use TPMv2 commands."""
-
u_boot_console.run_command('tpm2 init')
output = u_boot_console.run_command('echo $?')
assert output.endswith('0')
@@ -54,17 +58,43 @@ def test_tpm2_startup(u_boot_console):
Initiate the TPM internal state machine.
"""
+ u_boot_console.run_command('tpm2 startup TPM2_SU_CLEAR')
+ output = u_boot_console.run_command('echo $?')
+ assert output.endswith('0')
+
+def tpm2_sandbox_init(u_boot_console):
+ """Put sandbox back into a known state so we can run a test
+
+ This allows all tests to run in parallel, since no test depends on another.
+ """
+ u_boot_console.restart_uboot()
+ u_boot_console.run_command('tpm2 init')
+ output = u_boot_console.run_command('echo $?')
+ assert output.endswith('0')
u_boot_console.run_command('tpm2 startup TPM2_SU_CLEAR')
output = u_boot_console.run_command('echo $?')
assert output.endswith('0')
+ u_boot_console.run_command('tpm2 self_test full')
+ output = u_boot_console.run_command('echo $?')
+ assert output.endswith('0')
+
@pytest.mark.buildconfigspec('cmd_tpm_v2')
-def test_tpm2_self_test_full(u_boot_console):
+def test_tpm2_sandbox_self_test_full(u_boot_console):
"""Execute a TPM2_SelfTest (full) command.
Ask the TPM to perform all self tests to also enable full capabilities.
"""
+ if is_sandbox(u_boot_console):
+ u_boot_console.restart_uboot()
+ u_boot_console.run_command('tpm2 init')
+ output = u_boot_console.run_command('echo $?')
+ assert output.endswith('0')
+
+ u_boot_console.run_command('tpm2 startup TPM2_SU_CLEAR')
+ output = u_boot_console.run_command('echo $?')
+ assert output.endswith('0')
u_boot_console.run_command('tpm2 self_test full')
output = u_boot_console.run_command('echo $?')
@@ -77,7 +107,8 @@ def test_tpm2_continue_self_test(u_boot_console):
Ask the TPM to finish its self tests (alternative to the full test) in
order
to enter a fully operational state.
"""
-
+ if is_sandbox(u_boot_console):
+ tpm2_sandbox_init(u_boot_console)
u_boot_console.run_command('tpm2 self_test continue')
output = u_boot_console.run_command('echo $?')
assert output.endswith('0')
@@ -94,6 +125,8 @@ def test_tpm2_clear(u_boot_console):
not have a password set, otherwise this test will fail. ENDORSEMENT and
PLATFORM hierarchies are also available.
"""
+ if is_sandbox(u_boot_console):
+ tpm2_sandbox_init(u_boot_console)
u_boot_console.run_command('tpm2 clear TPM2_RH_LOCKOUT')
output = u_boot_console.run_command('echo $?')
@@ -112,7 +145,8 @@ def test_tpm2_change_auth(u_boot_console):
Use the LOCKOUT hierarchy for this. ENDORSEMENT and PLATFORM hierarchies
are
also available.
"""
-
+ if is_sandbox(u_boot_console):
+ tpm2_sandbox_init(u_boot_console)
force_init(u_boot_console)
u_boot_console.run_command('tpm2 change_auth TPM2_RH_LOCKOUT unicorn')
@@ -136,6 +170,8 @@ def test_tpm2_get_capability(u_boot_console):
There is no expected default values because it would depend on the chip
used. We can still save them in order to check they have changed later.
"""
+ if is_sandbox(u_boot_console):
+ tpm2_sandbox_init(u_boot_console)
force_init(u_boot_console)
ram = u_boot_utils.find_ram_base(u_boot_console)
@@ -158,7 +194,8 @@ def test_tpm2_dam_parameters(u_boot_console):
the authentication, otherwise the lockout will be engaged after the first
failed authentication attempt.
"""
-
+ if is_sandbox(u_boot_console):
+ tpm2_sandbox_init(u_boot_console)
force_init(u_boot_console)
ram = u_boot_utils.find_ram_base(u_boot_console)
@@ -181,6 +218,8 @@ def test_tpm2_pcr_read(u_boot_console):
Perform a PCR read of the 0th PCR. Must be zero.
"""
+ if is_sandbox(u_boot_console):
+ tpm2_sandbox_init(u_boot_console)
force_init(u_boot_console)
ram = u_boot_utils.find_ram_base(u_boot_console)
@@ -208,7 +247,8 @@ def test_tpm2_pcr_extend(u_boot_console):
No authentication mechanism is used here, not protecting against packet
replay, yet.
"""
-
+ if is_sandbox(u_boot_console):
+ tpm2_sandbox_init(u_boot_console)
force_init(u_boot_console)
ram = u_boot_utils.find_ram_base(u_boot_console)
--
2.30.0.478.g8a0d178c01-goog
