This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The
deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI
requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove
this board.
Cc: Rob Herring <r...@kernel.org>
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
arch/arm/Kconfig | 7 --
arch/arm/Makefile | 1 -
arch/arm/mach-highbank/Kconfig | 12 --
arch/arm/mach-highbank/Makefile | 6 -
arch/arm/mach-highbank/timer.c | 34 ------
board/highbank/MAINTAINERS | 6 -
board/highbank/Makefile | 6 -
board/highbank/ahci.c | 207 --------------------------------
board/highbank/highbank.c | 148 -----------------------
configs/highbank_defconfig | 28 -----
include/configs/highbank.h | 60 ---------
11 files changed, 515 deletions(-)
delete mode 100644 arch/arm/mach-highbank/Kconfig
delete mode 100644 arch/arm/mach-highbank/Makefile
delete mode 100644 arch/arm/mach-highbank/timer.c
delete mode 100644 board/highbank/MAINTAINERS
delete mode 100644 board/highbank/Makefile
delete mode 100644 board/highbank/ahci.c
delete mode 100644 board/highbank/highbank.c
delete mode 100644 configs/highbank_defconfig
delete mode 100644 include/configs/highbank.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 95557d6ed6bd..6fa69d39be5b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -750,11 +750,6 @@ config ARCH_S5PC1XX
select DM_SERIAL
imply CMD_DM
-config ARCH_HIGHBANK
- bool "Calxeda Highbank"
- select CPU_V7A
- select PL011_SERIAL
-
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select DM
@@ -1873,8 +1868,6 @@ source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/mach-highbank/Kconfig"
-
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-ipq40xx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 28b523b37c70..e1d266c3a4d8 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -57,7 +57,6 @@ machine-$(CONFIG_ARCH_BCM283X) += bcm283x
machine-$(CONFIG_ARCH_BCMSTB) += bcmstb
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_EXYNOS) += exynos
-machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_IPQ40XX) += ipq40xx
machine-$(CONFIG_ARCH_K3) += k3
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
deleted file mode 100644
index 0e73c0414293..000000000000
--- a/arch/arm/mach-highbank/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if ARCH_HIGHBANK
-
-config SYS_BOARD
- default "highbank"
-
-config SYS_SOC
- default "highbank"
-
-config SYS_CONFIG_NAME
- default "highbank"
-
-endif
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
deleted file mode 100644
index 029e266bedce..000000000000
--- a/arch/arm/mach-highbank/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-
-obj-y := timer.o
diff --git a/arch/arm/mach-highbank/timer.c b/arch/arm/mach-highbank/timer.c
deleted file mode 100644
index 2423a0e37855..000000000000
--- a/arch/arm/mach-highbank/timer.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- *
- * Based on arm926ejs/mx27/timer.c
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/io.h>
-#include <asm/arch-armv7/systimer.h>
-
-#undef SYSTIMER_BASE
-#define SYSTIMER_BASE 0xFFF34000 /* Timer 0 and 1 base */
-
-static struct systimer *systimer_base = (struct systimer *)SYSTIMER_BASE;
-
-/*
- * Start the timer
- */
-int timer_init(void)
-{
- /*
- * Setup timer0
- */
- writel(0, &systimer_base->timer0control);
- writel(SYSTIMER_RELOAD, &systimer_base->timer0load);
- writel(SYSTIMER_RELOAD, &systimer_base->timer0value);
- writel(SYSTIMER_EN | SYSTIMER_32BIT | SYSTIMER_PRESC_256,
- &systimer_base->timer0control);
-
- return 0;
-
-}
diff --git a/board/highbank/MAINTAINERS b/board/highbank/MAINTAINERS
deleted file mode 100644
index 69ddeddd6003..000000000000
--- a/board/highbank/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-HIGHBANK BOARD
-M: Rob Herring <r...@kernel.org>
-S: Maintained
-F: board/highbank/
-F: include/configs/highbank.h
-F: configs/highbank_defconfig
diff --git a/board/highbank/Makefile b/board/highbank/Makefile
deleted file mode 100644
index 57f7f2e2a658..000000000000
--- a/board/highbank/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-
-obj-y := highbank.o ahci.o
diff --git a/board/highbank/ahci.c b/board/highbank/ahci.c
deleted file mode 100644
index 9c057278ace1..000000000000
--- a/board/highbank/ahci.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2012 Calxeda, Inc.
- */
-
-#include <common.h>
-#include <ahci.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
-#define CPHY_ADDR(base, dev, addr) ((base) | (((addr) & 0x1ff) << 2))
-#define CPHY_BASE 0xfff58000
-#define CPHY_WIDTH 0x1000
-#define CPHY_DTE_XS 5
-#define CPHY_MII 31
-#define SERDES_CR_CTL 0x80a0
-#define SERDES_CR_ADDR 0x80a1
-#define SERDES_CR_DATA 0x80a2
-#define CR_BUSY 0x0001
-#define CR_START 0x0001
-#define CR_WR_RDN 0x0002
-#define CPHY_TX_INPUT_STS 0x2001
-#define CPHY_RX_INPUT_STS 0x2002
-#define CPHY_SATA_TX_OVERRIDE_BIT 0x8000
-#define CPHY_SATA_RX_OVERRIDE_BIT 0x4000
-#define CPHY_TX_INPUT_OVERRIDE 0x2004
-#define CPHY_RX_INPUT_OVERRIDE 0x2005
-#define SPHY_LANE 0x100
-#define SPHY_HALF_RATE 0x0001
-#define CPHY_SATA_DPLL_MODE 0x0700
-#define CPHY_SATA_DPLL_SHIFT 8
-#define CPHY_SATA_TX_ATTEN 0x1c00
-#define CPHY_SATA_TX_ATTEN_SHIFT 10
-
-#define HB_SREG_SATA_ATTEN 0xfff3cf24
-
-#define SATA_PORT_BASE 0xffe08000
-#define SATA_VERSIONR 0xf8
-#define SATA_HB_VERSION 0x3332302a
-
-static u32 __combo_phy_reg_read(u8 phy, u8 dev, u32 addr)
-{
- u32 data;
- writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy);
- data = readl(CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr));
- return data;
-}
-
-static void __combo_phy_reg_write(u8 phy, u8 dev, u32 addr, u32 data)
-{
- writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy);
- writel(data, CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr));
-}
-
-static u32 combo_phy_read(u8 phy, u32 addr)
-{
- u8 dev = CPHY_DTE_XS;
- if (phy == 5)
- dev = CPHY_MII;
- while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY)
- udelay(5);
- __combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr);
- __combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_START);
- while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY)
- udelay(5);
- return __combo_phy_reg_read(phy, dev, SERDES_CR_DATA);
-}
-
-static void combo_phy_write(u8 phy, u32 addr, u32 data)
-{
- u8 dev = CPHY_DTE_XS;
- if (phy == 5)
- dev = CPHY_MII;
- while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY)
- udelay(5);
- __combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr);
- __combo_phy_reg_write(phy, dev, SERDES_CR_DATA, data);
- __combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_WR_RDN | CR_START);
-}
-
-static void cphy_spread_spectrum_override(u8 phy, u8 lane, u32 val)
-{
- u32 tmp;
- tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
- tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT;
- combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
-
- tmp |= CPHY_SATA_RX_OVERRIDE_BIT;
- combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
-
- tmp &= ~CPHY_SATA_DPLL_MODE;
- tmp |= (val << CPHY_SATA_DPLL_SHIFT) & CPHY_SATA_DPLL_MODE;
- combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
-}
-
-static void cphy_tx_attenuation_override(u8 phy, u8 lane)
-{
- u32 val;
- u32 tmp;
- u8 shift;
-
- shift = ((phy == 5) ? 4 : lane) * 4;
-
- val = (readl(HB_SREG_SATA_ATTEN) >> shift) & 0xf;
-
- if (val & 0x8)
- return;
-
- tmp = combo_phy_read(phy, CPHY_TX_INPUT_STS + lane * SPHY_LANE);
- tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT;
- combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
-
- tmp |= CPHY_SATA_TX_OVERRIDE_BIT;
- combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
-
- tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN;
- combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
-}
-
-static void cphy_disable_port_overrides(u8 port)
-{
- u32 tmp;
- u8 lane = 0, phy = 0;
-
- if (port == 0)
- phy = 5;
- else if (port < 5)
- lane = port - 1;
- else
- return;
- tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
- tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT;
- combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
-
- tmp = combo_phy_read(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE);
- tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT;
- combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
-}
-
-void cphy_disable_overrides(void)
-{
- int i;
- u32 port_map;
-
- port_map = readl(0xffe08000 + HOST_PORTS_IMPL);
- for (i = 0; i < 5; i++) {
- if (port_map & (1 << i))
- cphy_disable_port_overrides(i);
- }
-}
-
-static void cphy_override_lane(u8 port)
-{
- u32 tmp, k = 0;
- u8 lane = 0, phy = 0;
-
- if (port == 0)
- phy = 5;
- else if (port < 5)
- lane = port - 1;
- else
- return;
-
- do {
- tmp = combo_phy_read(0, CPHY_RX_INPUT_STS +
- lane * SPHY_LANE);
- } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
- cphy_spread_spectrum_override(phy, lane, 3);
- cphy_tx_attenuation_override(phy, lane);
-}
-
-#define WAIT_MS_LINKUP 4
-
-int ahci_link_up(struct ahci_uc_priv *probe_ent, int port)
-{
- u32 tmp;
- int j = 0;
- u8 *port_mmio = (u8 *)probe_ent->port[port].port_mmio;
- u32 is_highbank = readl(SATA_PORT_BASE + SATA_VERSIONR) ==
- SATA_HB_VERSION ? 1 : 0;
-
- /* Bring up SATA link.
- * SATA link bringup time is usually less than 1 ms; only very
- * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
- */
- while (j < WAIT_MS_LINKUP) {
- if (is_highbank && (j == 0)) {
- cphy_disable_port_overrides(port);
- writel(0x301, port_mmio + PORT_SCR_CTL);
- udelay(1000);
- writel(0x300, port_mmio + PORT_SCR_CTL);
- udelay(1000);
- cphy_override_lane(port);
- }
-
- tmp = readl(port_mmio + PORT_SCR_STAT);
- if ((tmp & 0xf) == 0x3)
- return 0;
- udelay(1000);
- j++;
-
- if ((j == WAIT_MS_LINKUP) && (tmp & 0xf))
- j = 0; /* retry phy reset */
- }
- return 1;
-}
diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c
deleted file mode 100644
index e07295c7b5c0..000000000000
--- a/board/highbank/highbank.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- */
-
-#include <common.h>
-#include <ahci.h>
-#include <cpu_func.h>
-#include <env.h>
-#include <fdt_support.h>
-#include <init.h>
-#include <net.h>
-#include <netdev.h>
-#include <scsi.h>
-
-#include <linux/sizes.h>
-#include <asm/io.h>
-
-#define HB_AHCI_BASE 0xffe08000
-
-#define HB_SCU_A9_PWR_STATUS 0xfff10008
-#define HB_SREG_A9_PWR_REQ 0xfff3cf00
-#define HB_SREG_A9_BOOT_SRC_STAT 0xfff3cf04
-#define HB_SREG_A9_PWRDOM_STAT 0xfff3cf20
-#define HB_SREG_A15_PWR_CTRL 0xfff3c200
-
-#define HB_PWR_SUSPEND 0
-#define HB_PWR_SOFT_RESET 1
-#define HB_PWR_HARD_RESET 2
-#define HB_PWR_SHUTDOWN 3
-
-#define PWRDOM_STAT_SATA 0x80000000
-#define PWRDOM_STAT_PCI 0x40000000
-#define PWRDOM_STAT_EMMC 0x20000000
-
-#define HB_SCU_A9_PWR_NORMAL 0
-#define HB_SCU_A9_PWR_DORMANT 2
-#define HB_SCU_A9_PWR_OFF 3
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void cphy_disable_overrides(void);
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
- icache_enable();
-
- return 0;
-}
-
-/* We know all the init functions have been run now */
-int board_eth_init(struct bd_info *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_CALXEDA_XGMAC
- rc += calxedaxgmac_initialize(0, 0xfff50000);
- rc += calxedaxgmac_initialize(1, 0xfff51000);
-#endif
- return rc;
-}
-
-#ifdef CONFIG_SCSI_AHCI_PLAT
-void scsi_init(void)
-{
- u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
-
- cphy_disable_overrides();
- if (reg & PWRDOM_STAT_SATA) {
- ahci_init((void __iomem *)HB_AHCI_BASE);
- scsi_scan(true);
- }
-}
-#endif
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
- char envbuffer[16];
- u32 boot_choice;
-
- boot_choice = readl(HB_SREG_A9_BOOT_SRC_STAT) & 0xff;
- sprintf(envbuffer, "bootcmd%d", boot_choice);
- if (env_get(envbuffer)) {
- sprintf(envbuffer, "run bootcmd%d", boot_choice);
- env_set("bootcmd", envbuffer);
- } else
- env_set("bootcmd", "");
-
- return 0;
-}
-#endif
-
-int dram_init(void)
-{
- gd->ram_size = SZ_512M;
- return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *fdt, struct bd_info *bd)
-{
- static const char disabled[] = "disabled";
- u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
-
- if (!(reg & PWRDOM_STAT_SATA))
- do_fixup_by_compat(fdt, "calxeda,hb-ahci", "status",
- disabled, sizeof(disabled), 1);
-
- if (!(reg & PWRDOM_STAT_EMMC))
- do_fixup_by_compat(fdt, "calxeda,hb-sdhci", "status",
- disabled, sizeof(disabled), 1);
-
- return 0;
-}
-#endif
-
-static int is_highbank(void)
-{
- uint32_t midr;
-
- asm volatile ("mrc p15, 0, %0, c0, c0, 0\n" : "=r"(midr));
-
- return (midr & 0xfff0) == 0xc090;
-}
-
-void reset_cpu(ulong addr)
-{
- writel(HB_PWR_HARD_RESET, HB_SREG_A9_PWR_REQ);
- if (is_highbank())
- writeb(HB_SCU_A9_PWR_OFF, HB_SCU_A9_PWR_STATUS);
- else
- writel(0x1, HB_SREG_A15_PWR_CTRL);
-
- wfi();
-}
-
-/*
- * turn off the override before transferring control to Linux, since Linux
- * may not support spread spectrum.
- */
-void arch_preboot_os(void)
-{
- cphy_disable_overrides();
-}
diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig
deleted file mode 100644
index 369b65ceee88..000000000000
--- a/configs/highbank_defconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_SYS_THUMB_BUILD=y
-CONFIG_ARCH_HIGHBANK=y
-CONFIG_SYS_TEXT_BASE=0x00008000
-CONFIG_NR_DRAM_BANKS=0
-CONFIG_ENV_SIZE=0x2000
-CONFIG_SYS_BOOTCOUNT_ADDR=0xfff3cf0c
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds...\nPress <s> to stop or <d>
to delay\n"
-CONFIG_AUTOBOOT_KEYED_CTRLC=y
-# CONFIG_USE_BOOTCOMMAND is not set
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_ENV_IS_IN_NVRAM=y
-CONFIG_ENV_ADDR=0xFFF88000
-CONFIG_SCSI_AHCI=y
-CONFIG_BOOTCOUNT_LIMIT=y
-# CONFIG_MMC is not set
-CONFIG_SCSI=y
-CONFIG_CONS_INDEX=0
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
deleted file mode 100644
index bdbaa475d204..000000000000
--- a/include/configs/highbank.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_BOOTMAPSZ (16 << 20)
-
-#define CONFIG_SYS_TIMER_RATE (150000000/256)
-#define CONFIG_SYS_TIMER_COUNTER (0xFFF34000 + 0x4)
-#define CONFIG_SYS_TIMER_COUNTS_DOWN
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
-
-#define CONFIG_PL011_CLOCK 150000000
-#define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) }
-
-#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors
*/
-
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 5
-#define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
- CONFIG_SYS_SCSI_MAX_LUN)
-
-#define CONFIG_CALXEDA_XGMAC
-
-#define CONFIG_BOOT_RETRY_TIME -1
-#define CONFIG_RESET_TO_RETRY
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR 0x800000
-#define CONFIG_SYS_64BIT_LBA
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- * The DRAM is already setup, so do not touch the DT node later.
- */
-#define PHYS_SDRAM_1_SIZE (4089 << 20)
-
-/* Environment data setup
-*/
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */
-#define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_INIT_SP_ADDR 0x01000000
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#endif
--
2.17.1
