If you decide to do this, please make sure you advertise it more widely than just this list.
I have a sheevaplug that I'd be sad to have to decommission. For the last decade, with never a complaint, it's been happily serving DHCP, DNS, and NTP to about 20 machines in my home network. I like it because the slightly unusual architecture makes it slightly less attractive as a target to the bad-guys out there. Maybe I'll replace it with a Raspberry Pi. Oh well: To everything there is a season... Rick On Tue, Feb 9, 2021, at 11:07 PM, Chris Packham wrote: > On Wed, 10 Feb 2021, 2:07 AM Tom Rini, <tr...@konsulko.com> wrote: > > > This board has not been converted to CONFIG_DM_MMC by the deadline of > > v2019.04, which is almost two years ago. In addition there are other DM > > migrations it is also missing. Remove it. > > > > We did get the odd bug report from debian for sheevaplug. They were > reasonably popular with enthusiasts at one point. Personally I wouldn't > miss this board but it might be worth a heads up (hence adding Vagrant C. > to the Cc). > > > > Cc: Prafulla Wadaskar <prafu...@marvell.com> > > Signed-off-by: Tom Rini <tr...@konsulko.com> > > --- > > arch/arm/dts/Makefile | 3 +- > > arch/arm/dts/kirkwood-sheevaplug-common.dtsi | 104 -------------- > > arch/arm/dts/kirkwood-sheevaplug.dts | 42 ------ > > arch/arm/mach-kirkwood/Kconfig | 4 - > > board/Marvell/sheevaplug/Kconfig | 12 -- > > board/Marvell/sheevaplug/MAINTAINERS | 6 - > > board/Marvell/sheevaplug/Makefile | 7 - > > board/Marvell/sheevaplug/kwbimage.cfg | 144 ------------------- > > board/Marvell/sheevaplug/sheevaplug.c | 135 ----------------- > > board/Marvell/sheevaplug/sheevaplug.h | 24 ---- > > configs/sheevaplug_defconfig | 55 ------- > > include/configs/sheevaplug.h | 73 ---------- > > 12 files changed, 1 insertion(+), 608 deletions(-) > > delete mode 100644 arch/arm/dts/kirkwood-sheevaplug-common.dtsi > > delete mode 100644 arch/arm/dts/kirkwood-sheevaplug.dts > > delete mode 100644 board/Marvell/sheevaplug/Kconfig > > delete mode 100644 board/Marvell/sheevaplug/MAINTAINERS > > delete mode 100644 board/Marvell/sheevaplug/Makefile > > delete mode 100644 board/Marvell/sheevaplug/kwbimage.cfg > > delete mode 100644 board/Marvell/sheevaplug/sheevaplug.c > > delete mode 100644 board/Marvell/sheevaplug/sheevaplug.h > > delete mode 100644 configs/sheevaplug_defconfig > > delete mode 100644 include/configs/sheevaplug.h > > > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > > index b8f88bca0af9..12a74ed0eb08 100644 > > --- a/arch/arm/dts/Makefile > > +++ b/arch/arm/dts/Makefile > > @@ -58,8 +58,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \ > > kirkwood-ns2lite.dtb \ > > kirkwood-ns2max.dtb \ > > kirkwood-ns2mini.dtb \ > > - kirkwood-pogo_e02.dtb \ > > - kirkwood-sheevaplug.dtb > > + kirkwood-pogo_e02.dtb > > > > dtb-$(CONFIG_MACH_S900) += \ > > bubblegum_96.dtb > > diff --git a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi > > b/arch/arm/dts/kirkwood-sheevaplug-common.dtsi > > deleted file mode 100644 > > index 0a698d3b7393..000000000000 > > --- a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi > > +++ /dev/null > > @@ -1,104 +0,0 @@ > > -// SPDX-License-Identifier: GPL-2.0 > > -/* > > - * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs > > - * > > - * Copyright (C) 2013 Simon Baatz <gmbno...@gmail.com> > > - */ > > - > > -#include "kirkwood.dtsi" > > -#include "kirkwood-6281.dtsi" > > - > > -/ { > > - memory { > > - device_type = "memory"; > > - reg = <0x00000000 0x20000000>; > > - }; > > - > > - chosen { > > - bootargs = "console=ttyS0,115200n8 earlyprintk"; > > - stdout-path = &uart0; > > - }; > > - > > - ocp@f1000000 { > > - pinctrl: pin-controller@10000 { > > - > > - pmx_usb_power_enable: pmx-usb-power-enable { > > - marvell,pins = "mpp29"; > > - marvell,function = "gpio"; > > - }; > > - pmx_led_red: pmx-led-red { > > - marvell,pins = "mpp46"; > > - marvell,function = "gpio"; > > - }; > > - pmx_led_blue: pmx-led-blue { > > - marvell,pins = "mpp49"; > > - marvell,function = "gpio"; > > - }; > > - pmx_sdio_cd: pmx-sdio-cd { > > - marvell,pins = "mpp44"; > > - marvell,function = "gpio"; > > - }; > > - pmx_sdio_wp: pmx-sdio-wp { > > - marvell,pins = "mpp47"; > > - marvell,function = "gpio"; > > - }; > > - }; > > - serial@12000 { > > - status = "okay"; > > - }; > > - }; > > - > > - regulators { > > - compatible = "simple-bus"; > > - #address-cells = <1>; > > - #size-cells = <0>; > > - pinctrl-0 = <&pmx_usb_power_enable>; > > - pinctrl-names = "default"; > > - > > - usb_power: regulator@1 { > > - compatible = "regulator-fixed"; > > - reg = <1>; > > - regulator-name = "USB Power"; > > - regulator-min-microvolt = <5000000>; > > - regulator-max-microvolt = <5000000>; > > - enable-active-high; > > - regulator-always-on; > > - regulator-boot-on; > > - gpio = <&gpio0 29 0>; > > - }; > > - }; > > -}; > > - > > -&nand { > > - status = "okay"; > > - > > - partition@0 { > > - label = "u-boot"; > > - reg = <0x0000000 0x100000>; > > - }; > > - > > - partition@100000 { > > - label = "uImage"; > > - reg = <0x0100000 0x400000>; > > - }; > > - > > - partition@500000 { > > - label = "root"; > > - reg = <0x0500000 0x1fb00000>; > > - }; > > -}; > > - > > -&mdio { > > - status = "okay"; > > - > > - ethphy0: ethernet-phy@0 { > > - reg = <0>; > > - }; > > -}; > > - > > -ð0 { > > - status = "okay"; > > - ethernet0-port@0 { > > - phy-handle = <ðphy0>; > > - }; > > -}; > > diff --git a/arch/arm/dts/kirkwood-sheevaplug.dts > > b/arch/arm/dts/kirkwood-sheevaplug.dts > > deleted file mode 100644 > > index c73cc904e5c4..000000000000 > > --- a/arch/arm/dts/kirkwood-sheevaplug.dts > > +++ /dev/null > > @@ -1,42 +0,0 @@ > > -// SPDX-License-Identifier: GPL-2.0 > > -/* > > - * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug > > - * > > - * Copyright (C) 2013 Simon Baatz <gmbno...@gmail.com> > > - */ > > - > > -/dts-v1/; > > - > > -#include "kirkwood-sheevaplug-common.dtsi" > > - > > -/ { > > - model = "Globalscale Technologies SheevaPlug"; > > - compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", > > "marvell,kirkwood"; > > - > > - ocp@f1000000 { > > - mvsdio@90000 { > > - pinctrl-0 = <&pmx_sdio>; > > - pinctrl-names = "default"; > > - status = "okay"; > > - /* No CD or WP GPIOs */ > > - broken-cd; > > - }; > > - }; > > - > > - gpio-leds { > > - compatible = "gpio-leds"; > > - pinctrl-0 = <&pmx_led_blue &pmx_led_red>; > > - pinctrl-names = "default"; > > - > > - health { > > - label = "sheevaplug:blue:health"; > > - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; > > - default-state = "keep"; > > - }; > > - > > - misc { > > - label = "sheevaplug:red:misc"; > > - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; > > - }; > > - }; > > -}; > > diff --git a/arch/arm/mach-kirkwood/Kconfig > > b/arch/arm/mach-kirkwood/Kconfig > > index 6082bdb35b6c..1d2ba886dd1a 100644 > > --- a/arch/arm/mach-kirkwood/Kconfig > > +++ b/arch/arm/mach-kirkwood/Kconfig > > @@ -13,9 +13,6 @@ config TARGET_DS109 > > config TARGET_GURUPLUG > > bool "GuruPlug Board" > > > > -config TARGET_SHEEVAPLUG > > - bool "SheevaPlug Board" > > - > > config TARGET_LSXL > > bool "lsxl Board" > > > > @@ -70,7 +67,6 @@ config SYS_SOC > > source "board/Marvell/dreamplug/Kconfig" > > source "board/Synology/ds109/Kconfig" > > source "board/Marvell/guruplug/Kconfig" > > -source "board/Marvell/sheevaplug/Kconfig" > > source "board/buffalo/lsxl/Kconfig" > > source "board/cloudengines/pogo_e02/Kconfig" > > source "board/d-link/dns325/Kconfig" > > diff --git a/board/Marvell/sheevaplug/Kconfig > > b/board/Marvell/sheevaplug/Kconfig > > deleted file mode 100644 > > index e5f928472994..000000000000 > > --- a/board/Marvell/sheevaplug/Kconfig > > +++ /dev/null > > @@ -1,12 +0,0 @@ > > -if TARGET_SHEEVAPLUG > > - > > -config SYS_BOARD > > - default "sheevaplug" > > - > > -config SYS_VENDOR > > - default "Marvell" > > - > > -config SYS_CONFIG_NAME > > - default "sheevaplug" > > - > > -endif > > diff --git a/board/Marvell/sheevaplug/MAINTAINERS > > b/board/Marvell/sheevaplug/MAINTAINERS > > deleted file mode 100644 > > index 2b0103d07dc9..000000000000 > > --- a/board/Marvell/sheevaplug/MAINTAINERS > > +++ /dev/null > > @@ -1,6 +0,0 @@ > > -SHEEVAPLUG BOARD > > -M: Prafulla Wadaskar <prafu...@marvell.com> > > -S: Maintained > > -F: board/Marvell/sheevaplug/ > > -F: include/configs/sheevaplug.h > > -F: configs/sheevaplug_defconfig > > diff --git a/board/Marvell/sheevaplug/Makefile > > b/board/Marvell/sheevaplug/Makefile > > deleted file mode 100644 > > index c39dd03e2d30..000000000000 > > --- a/board/Marvell/sheevaplug/Makefile > > +++ /dev/null > > @@ -1,7 +0,0 @@ > > -# SPDX-License-Identifier: GPL-2.0+ > > -# > > -# (C) Copyright 2009 > > -# Marvell Semiconductor <www.marvell.com> > > -# Written-by: Prafulla Wadaskar <prafu...@marvell.com> > > - > > -obj-y := sheevaplug.o > > diff --git a/board/Marvell/sheevaplug/kwbimage.cfg > > b/board/Marvell/sheevaplug/kwbimage.cfg > > deleted file mode 100644 > > index f5206451da44..000000000000 > > --- a/board/Marvell/sheevaplug/kwbimage.cfg > > +++ /dev/null > > @@ -1,144 +0,0 @@ > > -# SPDX-License-Identifier: GPL-2.0+ > > -# > > -# (C) Copyright 2009 > > -# Marvell Semiconductor <www.marvell.com> > > -# Written-by: Prafulla Wadaskar <prafu...@marvell.com> > > -# Refer to doc/README.kwbimage for more details about how-to > > -# configure and create kirkwood boot images. > > -# > > - > > -# Boot Media configurations > > -BOOT_FROM nand > > -NAND_ECC_MODE default > > -NAND_PAGE_SIZE 0x0800 > > - > > -# SOC registers configuration using bootrom header extension > > -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed > > - > > -# Configure RGMII-0 interface pad voltage to 1.8V > > -DATA 0xFFD100e0 0x1b1b1b9b > > - > > -#Dram initalization for SINGLE x16 CL=5 @ 400MHz > > -DATA 0xFFD01400 0x43000c30 # DDR Configuration register > > -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) > > -# bit23-14: zero > > -# bit24: 1= enable exit self refresh mode on DDR access > > -# bit25: 1 required > > -# bit29-26: zero > > -# bit31-30: 01 > > - > > -DATA 0xFFD01404 0x37543000 # DDR Controller Control Low > > -# bit 4: 0=addr/cmd in smame cycle > > -# bit 5: 0=clk is driven during self refresh, we don't care for APX > > -# bit 6: 0=use recommended falling edge of clk for addr/cmd > > -# bit14: 0=input buffer always powered up > > -# bit18: 1=cpu lock transaction enabled > > -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled > > bit31=0 > > -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, > > unbuffered DIMM > > -# bit30-28: 3 required > > -# bit31: 0=no additional STARTBURST delay > > - > > -DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) > > -# bit3-0: TRAS lsbs > > -# bit7-4: TRCD > > -# bit11- 8: TRP > > -# bit15-12: TWR > > -# bit19-16: TWTR > > -# bit20: TRAS msb > > -# bit23-21: 0x0 > > -# bit27-24: TRRD > > -# bit31-28: TRTP > > - > > -DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) > > -# bit6-0: TRFC > > -# bit8-7: TR2R > > -# bit10-9: TR2W > > -# bit12-11: TW2W > > -# bit31-13: zero required > > - > > -DATA 0xFFD01410 0x000000cc # DDR Address Control > > -# bit1-0: 00, Cs0width=x8 > > -# bit3-2: 11, Cs0size=1Gb > > -# bit5-4: 00, Cs1width=x8 > > -# bit7-6: 11, Cs1size=1Gb > > -# bit9-8: 00, Cs2width=nonexistent > > -# bit11-10: 00, Cs2size =nonexistent > > -# bit13-12: 00, Cs3width=nonexistent > > -# bit15-14: 00, Cs3size =nonexistent > > -# bit16: 0, Cs0AddrSel > > -# bit17: 0, Cs1AddrSel > > -# bit18: 0, Cs2AddrSel > > -# bit19: 0, Cs3AddrSel > > -# bit31-20: 0 required > > - > > -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control > > -# bit0: 0, OpenPage enabled > > -# bit31-1: 0 required > > - > > -DATA 0xFFD01418 0x00000000 # DDR Operation > > -# bit3-0: 0x0, DDR cmd > > -# bit31-4: 0 required > > - > > -DATA 0xFFD0141C 0x00000C52 # DDR Mode > > -# bit2-0: 2, BurstLen=2 required > > -# bit3: 0, BurstType=0 required > > -# bit6-4: 4, CL=5 > > -# bit7: 0, TestMode=0 normal > > -# bit8: 0, DLL reset=0 normal > > -# bit11-9: 6, auto-precharge write recovery ???????????? > > -# bit12: 0, PD must be zero > > -# bit31-13: 0 required > > - > > -DATA 0xFFD01420 0x00000040 # DDR Extended Mode > > -# bit0: 0, DDR DLL enabled > > -# bit1: 0, DDR drive strenght normal > > -# bit2: 0, DDR ODT control lsd (disabled) > > -# bit5-3: 000, required > > -# bit6: 1, DDR ODT control msb, (disabled) > > -# bit9-7: 000, required > > -# bit10: 0, differential DQS enabled > > -# bit11: 0, required > > -# bit12: 0, DDR output buffer enabled > > -# bit31-13: 0 required > > - > > -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High > > -# bit2-0: 111, required > > -# bit3 : 1 , MBUS Burst Chop disabled > > -# bit6-4: 111, required > > -# bit7 : 0 > > -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= > > 300MHz > > -# bit9 : 0 , no half clock cycle addition to dataout > > -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals > > -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh > > -# bit15-12: 1111 required > > -# bit31-16: 0 required > > - > > -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) > > -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) > > - > > -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 > > -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size > > -# bit0: 1, Window enabled > > -# bit1: 0, Write Protect disabled > > -# bit3-2: 00, CS0 hit selected > > -# bit23-4: ones, required > > -# bit31-24: 0x0F, Size (i.e. 256MB) > > - > > -DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb > > -DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 > > - > > -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled > > -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled > > - > > -DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) > > -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) > > -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above > > -# bit3-2: 01, ODT1 active NEVER! > > -# bit31-4: zero, required > > - > > -DATA 0xFFD0149C 0x0000E803 # CPU ODT Control > > -DATA 0xFFD01480 0x00000001 # DDR Initialization Control > > -#bit0=1, enable DDR init upon this register write > > - > > -# End of Header extension > > -DATA 0x0 0x0 > > diff --git a/board/Marvell/sheevaplug/sheevaplug.c > > b/board/Marvell/sheevaplug/sheevaplug.c > > deleted file mode 100644 > > index 6311ed3b2e59..000000000000 > > --- a/board/Marvell/sheevaplug/sheevaplug.c > > +++ /dev/null > > @@ -1,135 +0,0 @@ > > -// SPDX-License-Identifier: GPL-2.0+ > > -/* > > - * (C) Copyright 2009 > > - * Marvell Semiconductor <www.marvell.com> > > - * Written-by: Prafulla Wadaskar <prafu...@marvell.com> > > - */ > > - > > -#include <common.h> > > -#include <init.h> > > -#include <miiphy.h> > > -#include <net.h> > > -#include <asm/mach-types.h> > > -#include <asm/arch/cpu.h> > > -#include <asm/arch/soc.h> > > -#include <asm/arch/mpp.h> > > -#include "sheevaplug.h" > > - > > -DECLARE_GLOBAL_DATA_PTR; > > - > > -int board_early_init_f(void) > > -{ > > - /* > > - * default gpio configuration > > - * There are maximum 64 gpios controlled through 2 sets of > > registers > > - * the below configuration configures mainly initial LED status > > - */ > > - mvebu_config_gpio(SHEEVAPLUG_OE_VAL_LOW, > > - SHEEVAPLUG_OE_VAL_HIGH, > > - SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH); > > - > > - /* Multi-Purpose Pins Functionality configuration */ > > - static const u32 kwmpp_config[] = { > > - MPP0_NF_IO2, > > - MPP1_NF_IO3, > > - MPP2_NF_IO4, > > - MPP3_NF_IO5, > > - MPP4_NF_IO6, > > - MPP5_NF_IO7, > > - MPP6_SYSRST_OUTn, > > - MPP7_GPO, > > - MPP8_UART0_RTS, > > - MPP9_UART0_CTS, > > - MPP10_UART0_TXD, > > - MPP11_UART0_RXD, > > - MPP12_SD_CLK, > > - MPP13_SD_CMD, > > - MPP14_SD_D0, > > - MPP15_SD_D1, > > - MPP16_SD_D2, > > - MPP17_SD_D3, > > - MPP18_NF_IO0, > > - MPP19_NF_IO1, > > - MPP20_GPIO, > > - MPP21_GPIO, > > - MPP22_GPIO, > > - MPP23_GPIO, > > - MPP24_GPIO, > > - MPP25_GPIO, > > - MPP26_GPIO, > > - MPP27_GPIO, > > - MPP28_GPIO, > > - MPP29_TSMP9, > > - MPP30_GPIO, > > - MPP31_GPIO, > > - MPP32_GPIO, > > - MPP33_GPIO, > > - MPP34_GPIO, > > - MPP35_GPIO, > > - MPP36_GPIO, > > - MPP37_GPIO, > > - MPP38_GPIO, > > - MPP39_GPIO, > > - MPP40_GPIO, > > - MPP41_GPIO, > > - MPP42_GPIO, > > - MPP43_GPIO, > > - MPP44_GPIO, > > - MPP45_GPIO, > > - MPP46_GPIO, > > - MPP47_GPIO, > > - MPP48_GPIO, > > - MPP49_GPIO, > > - 0 > > - }; > > - kirkwood_mpp_conf(kwmpp_config, NULL); > > - return 0; > > -} > > - > > -int board_init(void) > > -{ > > - /* > > - * arch number of board > > - */ > > - gd->bd->bi_arch_number = MACH_TYPE_SHEEVAPLUG; > > - > > - /* adress of boot parameters */ > > - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; > > - > > - return 0; > > -} > > - > > -#ifdef CONFIG_RESET_PHY_R > > -/* Configure and enable MV88E1116 PHY */ > > -void reset_phy(void) > > -{ > > - u16 reg; > > - u16 devadr; > > - char *name = "egiga0"; > > - > > - if (miiphy_set_current_dev(name)) > > - return; > > - > > - /* command to read PHY dev address */ > > - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { > > - printf("Err..%s could not read PHY dev address\n", > > - __FUNCTION__); > > - return; > > - } > > - > > - /* > > - * Enable RGMII delay on Tx and Rx for CPU port > > - * Ref: sec 4.7.2 of chip datasheet > > - */ > > - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); > > - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); > > - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); > > - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); > > - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); > > - > > - /* reset the phy */ > > - miiphy_reset(name, devadr); > > - > > - printf("88E1116 Initialized on %s\n", name); > > -} > > -#endif /* CONFIG_RESET_PHY_R */ > > diff --git a/board/Marvell/sheevaplug/sheevaplug.h > > b/board/Marvell/sheevaplug/sheevaplug.h > > deleted file mode 100644 > > index e026c1b53bd0..000000000000 > > --- a/board/Marvell/sheevaplug/sheevaplug.h > > +++ /dev/null > > @@ -1,24 +0,0 @@ > > -/* SPDX-License-Identifier: GPL-2.0+ */ > > -/* > > - * (C) Copyright 2009 > > - * Marvell Semiconductor <www.marvell.com> > > - * Written-by: Prafulla Wadaskar <prafu...@marvell.com> > > - */ > > - > > -#ifndef __SHEEVAPLUG_H > > -#define __SHEEVAPLUG_H > > - > > -#define SHEEVAPLUG_OE_LOW (~(0)) > > -#define SHEEVAPLUG_OE_HIGH (~(0)) > > -#define SHEEVAPLUG_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ > > -#define SHEEVAPLUG_OE_VAL_HIGH (1 << 17) /* LED pin high */ > > - > > -/* PHY related */ > > -#define MV88E1116_LED_FCTRL_REG 10 > > -#define MV88E1116_CPRSP_CR3_REG 21 > > -#define MV88E1116_MAC_CTRL_REG 21 > > -#define MV88E1116_PGADR_REG 22 > > -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) > > -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) > > - > > -#endif /* __SHEEVAPLUG_H */ > > diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig > > deleted file mode 100644 > > index 34da356b8e2a..000000000000 > > --- a/configs/sheevaplug_defconfig > > +++ /dev/null > > @@ -1,55 +0,0 @@ > > -CONFIG_ARM=y > > -CONFIG_SYS_DCACHE_OFF=y > > -CONFIG_ARCH_CPU_INIT=y > > -CONFIG_SYS_THUMB_BUILD=y > > -CONFIG_ARCH_KIRKWOOD=y > > -CONFIG_SYS_TEXT_BASE=0x600000 > > -CONFIG_NR_DRAM_BANKS=2 > > -CONFIG_TARGET_SHEEVAPLUG=y > > -CONFIG_ENV_SIZE=0x20000 > > -CONFIG_ENV_OFFSET=0x80000 > > -CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" > > -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-sheevaplug" > > -# CONFIG_SYS_MALLOC_F is not set > > -CONFIG_BOOTDELAY=3 > > -CONFIG_USE_PREBOOT=y > > -# CONFIG_DISPLAY_BOARDINFO is not set > > -CONFIG_HUSH_PARSER=y > > -CONFIG_CMD_BOOTZ=y > > -# CONFIG_CMD_FLASH is not set > > -CONFIG_CMD_IDE=y > > -CONFIG_CMD_MMC=y > > -CONFIG_CMD_NAND=y > > -CONFIG_CMD_USB=y > > -# CONFIG_CMD_SETEXPR is not set > > -CONFIG_CMD_DHCP=y > > -CONFIG_CMD_MII=y > > -CONFIG_CMD_PING=y > > -CONFIG_CMD_EXT2=y > > -CONFIG_CMD_EXT4=y > > -CONFIG_CMD_FAT=y > > -CONFIG_CMD_JFFS2=y > > -CONFIG_CMD_MTDPARTS=y > > -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" > > > > -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)" > > -CONFIG_CMD_UBI=y > > -CONFIG_ISO_PARTITION=y > > -CONFIG_OF_CONTROL=y > > -CONFIG_ENV_OVERWRITE=y > > -CONFIG_ENV_IS_IN_NAND=y > > -CONFIG_NETCONSOLE=y > > -CONFIG_DM=y > > -CONFIG_MVSATA_IDE=y > > -CONFIG_MTD=y > > -CONFIG_MTD_RAW_NAND=y > > -CONFIG_MVGBE=y > > -CONFIG_MII=y > > -CONFIG_DM_RTC=y > > -CONFIG_RTC_MV=y > > -CONFIG_SYS_NS16550=y > > -CONFIG_USB=y > > -CONFIG_DM_USB=y > > -CONFIG_USB_EHCI_HCD=y > > -CONFIG_USB_STORAGE=y > > -CONFIG_LZMA=y > > -CONFIG_BZIP2=y > > diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h > > deleted file mode 100644 > > index e1f8fb8ac84b..000000000000 > > --- a/include/configs/sheevaplug.h > > +++ /dev/null > > @@ -1,73 +0,0 @@ > > -/* SPDX-License-Identifier: GPL-2.0+ */ > > -/* > > - * (C) Copyright 2009-2014 > > - * Gerald Kerma <drea...@doukki.net> > > - * Marvell Semiconductor <www.marvell.com> > > - * Written-by: Prafulla Wadaskar <prafu...@marvell.com> > > - */ > > - > > -#ifndef _CONFIG_SHEEVAPLUG_H > > -#define _CONFIG_SHEEVAPLUG_H > > - > > -/* > > - * High Level Configuration Options (easy to change) > > - */ > > -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ > > - > > -#include "mv-plug-common.h" > > - > > -/* > > - * Environment variables configurations > > - */ > > -/* > > - * max 4k env size is enough, but in case of nand > > - * it has to be rounded to sector size > > - */ > > -/* > > - * Environment is right behind U-Boot in flash. Make sure U-Boot > > - * doesn't grow into the environment area. > > - */ > > -#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET > > - > > -/* > > - * Default environment variables > > - */ > > -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ > > - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ > > - "bootm 0x6400000;" > > - > > -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ > > - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT \ > > - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \ > > - "x_bootcmd_usb=usb start\0" \ > > - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" > > - > > -/* > > - * Ethernet Driver configuration > > - */ > > -#ifdef CONFIG_CMD_NET > > -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ > > -#define CONFIG_PHY_BASE_ADR 0 > > -#endif /* CONFIG_CMD_NET */ > > - > > -/* > > - * SDIO/MMC Card Configuration > > - */ > > -#ifdef CONFIG_CMD_MMC > > -#define CONFIG_MVEBU_MMC > > -#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE > > -#endif /* CONFIG_CMD_MMC */ > > - > > -/* > > - * SATA driver configuration > > - */ > > -#ifdef CONFIG_IDE > > -#define __io > > -#define CONFIG_IDE_PREINIT > > -#define CONFIG_MVSATA_IDE_USE_PORT0 > > -#define CONFIG_MVSATA_IDE_USE_PORT1 > > -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET > > -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET > > -#endif /* CONFIG_IDE */ > > - > > -#endif /* _CONFIG_SHEEVAPLUG_H */ > > -- > > 2.17.1 > > > > >