On Mon, Feb 15, 2021 at 08:59:32PM +0100, Luka Kovacic wrote: > The hw_info command is implemented to enable parsing Marvell hw_info > formatted environments. This format is often used on Marvell Armada A37XX > based devices to store parameters like the board serial number, factory > MAC addresses and some other information. > These parameters are usually written to the flash in the factory. > > Currently the command supports reading/writing parameters and dumping the > current hw_info parameters. > EEPROM config pattern and checksum aren't supported. > > This functionality has been tested on the GST ESPRESSOBin-Ultra board > successfully, both reading the stock U-Boot parameters in mainline U-Boot > and reading the parameters written by this command in the stock U-Boot. > > Usage example: > => hw_info load > => saveenv > > Signed-off-by: Luka Kovacic <luka.kova...@sartura.hr> > Cc: Luka Perkov <luka.per...@sartura.hr> > Cc: Robert Marko <robert.ma...@sartura.hr>
Reviewed-by: Tom Rini <tr...@konsulko.com> -- Tom
signature.asc
Description: PGP signature
