From: Dalon Westergreen <dalon.westergr...@intel.com>
Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel SOCFPGA
SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex" is hex formatted
spl with and offset of CONFIG_SPL_TEXT_BASE. It combines the spl image and dtb.
"u-boot-spl-dtb.hex" is needed to generate the final configuration bitstream
for Intel SOCFPGA SOC64 devices.
Signed-off-by: Dalon Westergreen <dalon.westergr...@intel.com>
Signed-off-by: Siew Chin Lim <elly.siew.chin....@intel.com>
---
v4
---
- Replace CONFIG_TARGET_SOCFPGA_STRATIX10/AGILEX with
CONFIG_TARGET_SOCFPGA_SOC64.
- Add this patch into 'VAB' series because it is depending on
CONFIG_TARGET_SOCFPGA_SOC64 patch.
---
Makefile | 11 ++++++-----
include/configs/socfpga_soc64_common.h | 2 +-
scripts/Makefile.spl | 7 +++++++
3 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/Makefile b/Makefile
index 23dd11f723..dd7781b43c 100644
--- a/Makefile
+++ b/Makefile
@@ -1263,11 +1263,6 @@ OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R
.resetvec)
-OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
-
-spl/u-boot-spl.hex: spl/u-boot-spl FORCE
- $(call if_changed,objcopy)
-
binary_size_check: u-boot-nodtb.bin FORCE
@file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
map_size=$(shell cat u-boot.map | \
@@ -1931,6 +1926,12 @@ spl/u-boot-spl.bin: spl/u-boot-spl
@:
$(SPL_SIZE_CHECK)
+spl/u-boot-spl-dtb.bin: spl/u-boot-spl
+ @:
+
+spl/u-boot-spl-dtb.hex: spl/u-boot-spl
+ @:
+
spl/u-boot-spl: tools prepare \
$(if
$(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
$(if
$(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
diff --git a/include/configs/socfpga_soc64_common.h
b/include/configs/socfpga_soc64_common.h
index 0e54601257..1cfa190047 100644
--- a/include/configs/socfpga_soc64_common.h
+++ b/include/configs/socfpga_soc64_common.h
@@ -194,7 +194,7 @@ unsigned int cm_get_l4_sys_free_clk_hz(void);
* 0x8000_0000 ...... End of SDRAM_1 (assume 2GB)
*
*/
-#define CONFIG_SPL_TARGET "spl/u-boot-spl.hex"
+#define CONFIG_SPL_TARGET "spl/u-boot-spl-dtb.hex"
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index ea4e045769..1fd63efdfd 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -229,6 +229,8 @@ ifneq
($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),)
INPUTS-y += $(obj)/$(SPL_BIN).sfp
endif
+INPUTS-$(CONFIG_TARGET_SOCFPGA_SOC64) += $(obj)/u-boot-spl-dtb.hex
+
ifdef CONFIG_ARCH_SUNXI
INPUTS-y += $(obj)/sunxi-spl.bin
@@ -389,6 +391,11 @@ $(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
MKIMAGEFLAGS_sunxi-spl.bin = -T sunxi_egon \
-n $(CONFIG_DEFAULT_DEVICE_TREE)
+OBJCOPYFLAGS_u-boot-spl-dtb.hex := -I binary -O ihex
--change-address=$(CONFIG_SPL_TEXT_BASE)
+
+$(obj)/u-boot-spl-dtb.hex: $(obj)/u-boot-spl-dtb.bin FORCE
+ $(call if_changed,objcopy)
+
$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
$(call if_changed,mkimage)
--
2.13.0
