On 3/2/21 9:21 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut <ma...@denx.de> wrote:
On 3/2/21 8:53 AM, Jagan Teki wrote:
On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut <ma...@denx.de> wrote:
On 2/27/21 8:54 AM, Jagan Teki wrote:
Hi Marek,
On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut <ma...@denx.de> wrote:
Add support for ethernet on the imx8mn-ddr4-evk.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
---
arch/arm/dts/imx8mn-evk.dtsi | 1 +
board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++--
configs/imx8mn_ddr4_evk_defconfig | 8 +++++
3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi
index 76d042a4cf0..416fadb22b1 100644
--- a/arch/arm/dts/imx8mn-evk.dtsi
+++ b/arch/arm/dts/imx8mn-evk.dtsi
@@ -53,6 +53,7 @@
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
+ phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
I believe this is phy reset-gpio to be part of mdio child node. any
idea why it added in fec1 node?
Try $ git grep phy-reset drivers/net/ , that should clarify it all.
In short, FEC in U-Boot still uses legacy bindings.
True. I think it's better to add this property on -u-boot.dtsi which
helps to maintain Linux bindings.
The reset GPIO is not specific to U-Boot in any way, so no.
Instead, the Linux DT bindings should be updated too, but that's a
separate topic.
Deprecated optional properties:
To avoid these, create a phy node according to phy.txt in the same
directory, and point the fec's "phy-handle" property to it. Then use
the phy's reset binding, again described by phy.txt.
- phy-reset-gpios : Should specify the gpio for phy reset
- phy-reset-duration : Reset duration in milliseconds. Should present
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
Jagan refer maybe that property is deprecated
See above, U-Boot does not support the per-PHY reset bindings with FEC.
However, the PHY reset GPIO binding is not U-Boot specific, so it should
not be hidden in -u-boot.dtsi .