At present the eMMC device does not have an alias so it appears after the SD card which is device 1. There is no device 0 which is odd.
Make the eMMC device be the first one. Update the boot script to use the new device. Signed-off-by: Simon Glass <[email protected]> --- arch/x86/dts/chromebook_coral.dts | 1 + include/configs/chromebook_coral.h | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts index 2ffe3b423c3..9f84480e68e 100644 --- a/arch/x86/dts/chromebook_coral.dts +++ b/arch/x86/dts/chromebook_coral.dts @@ -47,6 +47,7 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + mmc0 = &emmc; mmc1 = &sdmmc; }; diff --git a/include/configs/chromebook_coral.h b/include/configs/chromebook_coral.h index 6e8e8ec1709..00760b8a307 100644 --- a/include/configs/chromebook_coral.h +++ b/include/configs/chromebook_coral.h @@ -12,13 +12,13 @@ #define CONFIG_BOOTCOMMAND \ "tpm init; tpm startup TPM2_SU_CLEAR; " \ - "read mmc 2:2 100000 0 80; setexpr loader *001004f0; " \ + "read mmc 0:2 100000 0 80; setexpr loader *001004f0; " \ "setexpr size *00100518; setexpr blocks $size / 200; " \ - "read mmc 2:2 100000 80 $blocks; setexpr setup $loader - 1000; " \ + "read mmc 0:2 100000 80 $blocks; setexpr setup $loader - 1000; " \ "setexpr cmdline_ptr $loader - 2000; " \ "setexpr.s cmdline *$cmdline_ptr; " \ "setexpr cmdline gsub %U \\\\${uuid}; " \ - "if part uuid mmc 2:2 uuid; then " \ + "if part uuid mmc 0:2 uuid; then " \ "zboot start 100000 0 0 0 $setup cmdline; " \ "zboot load; zboot setup; zboot dump; zboot go;" \ "fi" -- 2.31.0.rc2.261.g7f71774620-goog
