Enable building SPL for HiHope RZ/G2[HMN] boards. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad...@bp.renesas.com> Reviewed-by: Biju Das <biju.das...@bp.renesas.com> --- board/hoperun/hihope-rzg2/Makefile | 4 ++++ configs/hihope_rzg2_defconfig | 2 +- include/configs/rcar-gen3-common.h | 4 +++- 3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/board/hoperun/hihope-rzg2/Makefile b/board/hoperun/hihope-rzg2/Makefile index e989e7aacc..fbac612d3a 100644 --- a/board/hoperun/hihope-rzg2/Makefile +++ b/board/hoperun/hihope-rzg2/Makefile @@ -6,4 +6,8 @@ # SPDX-License-Identifier: GPL-2.0+ # +ifdef CONFIG_SPL_BUILD +obj-y := ../../renesas/rcar-common/gen3-spl.o +else obj-y := hihope-rzg2.o ../../renesas/rcar-common/common.o +endif diff --git a/configs/hihope_rzg2_defconfig b/configs/hihope_rzg2_defconfig index 69eaab073e..8acca194d4 100644 --- a/configs/hihope_rzg2_defconfig +++ b/configs/hihope_rzg2_defconfig @@ -2,12 +2,12 @@ CONFIG_ARM=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_RMOBILE=y CONFIG_SYS_TEXT_BASE=0x50000000 +CONFIG_SPL_TEXT_BASE=0xe6338000 CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xFFFE0000 CONFIG_DM_GPIO=y CONFIG_RCAR_GEN3=y CONFIG_TARGET_HIHOPE_RZG2=y -# CONFIG_SPL is not set CONFIG_DEFAULT_DEVICE_TREE="r8a774a1-hihope-rzg2m-u-boot" CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index b9762f5beb..24ba5a0c38 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -67,7 +67,9 @@ "booti 0x48080000 - 0x48000000" /* SPL support */ -#if defined(CONFIG_R8A7795) || defined(CONFIG_R8A7796) || defined(CONFIG_R8A77965) +#if defined(CONFIG_R8A774A1) || defined(CONFIG_R8A774B1) || \ + defined(CONFIG_R8A774E1) || defined(CONFIG_R8A7795) || \ + defined(CONFIG_R8A7796) || defined(CONFIG_R8A77965) #define CONFIG_SPL_BSS_START_ADDR 0xe633f000 #define CONFIG_SPL_BSS_MAX_SIZE 0x1000 #else -- 2.17.1