André Schwarz wrote: > It's a hardware issue - the 837x are distinguished by ID Pins. > Unfortunately they are buried within the listing of power pins and are > not named exclusively ... bloody documentation.
I can't talk about the MPC8377CVRALG specifically, but using pin configs to change the ID of the chip is not unusual. A dip switch setting on the P1022DS board will change the P1022 into a P1013, and the SVR will change accordingly. Perhaps your pin config is not set to the "default" for the chip you ordered, which is why it looks like a different chip? -- Timur Tabi Linux kernel developer at Freescale _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
