So far U-Boot was hard coding a (surely sufficient) memory size of 512
MB, even though all machines out there have at least 4GB of DRAM.
Since U-Boot uses its memory knowledge to populate the EFI memory map,
we are missing out here, at best losing everything beyond 4GB on Midway
boxes (which typically come with 8GB of DRAM).
Since the management processor populated the DT memory node already with
the detected DRAM size and configuration, we use that to populate
U-Boot's memory bank information, which is the base for the UEFI memory
map.
This finally allows us to get rid of the NR_DRAM_BANKS=0 hack, that we
had in place to avoid U-Boot messing up the DT memory node before
loading the kernel.
Also, to cover the whole of memory, we need to enable PHYS_64BIT.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
arch/arm/Kconfig | 1 +
board/highbank/highbank.c | 9 +++++++--
configs/highbank_defconfig | 2 +-
3 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0082d06182a..6b5479b60be 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -757,6 +757,7 @@ config ARCH_HIGHBANK
select CLK_CCF
select AHCI
select DM_ETH
+ select PHYS_64BIT
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c
index 0667a48965c..ffb6fd922da 100644
--- a/board/highbank/highbank.c
+++ b/board/highbank/highbank.c
@@ -8,6 +8,7 @@
#include <cpu_func.h>
#include <env.h>
#include <fdt_support.h>
+#include <fdtdec.h>
#include <init.h>
#include <net.h>
#include <scsi.h>
@@ -84,8 +85,12 @@ int misc_init_r(void)
int dram_init(void)
{
- gd->ram_size = SZ_512M;
- return 0;
+ return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+ return fdtdec_setup_memory_banksize();
}
#if defined(CONFIG_OF_BOARD_SETUP)
diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig
index c3352b827d7..5d65049c5c0 100644
--- a/configs/highbank_defconfig
+++ b/configs/highbank_defconfig
@@ -3,7 +3,7 @@ CONFIG_SYS_DCACHE_OFF=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_SYS_TEXT_BASE=0x00008000
-CONFIG_NR_DRAM_BANKS=0
+CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x2000
CONFIG_SYS_BOOTCOUNT_ADDR=0xfff3cf0c
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
--
2.17.5
