> -----Original Message----- > From: Priyanka Jain <priyanka.j...@nxp.com> > Sent: Tuesday, April 13, 2021 12:48 > To: Camelia Alexandra Groza (OSS) <camelia.gr...@oss.nxp.com>; u- > b...@lists.denx.de; w...@denx.de; Shengzhou Liu > <shengzhou....@nxp.com>; Z.q. Hou <zhiqiang....@nxp.com> > Cc: Madalin Bucur (OSS) <madalin.bu...@oss.nxp.com>; Camelia Alexandra > Groza <camelia.gr...@nxp.com> > Subject: RE: [PATCH 01/11] powerpc: dts: t2080: add QorIQ DPAA 1 FMan v3 > nodes > > > >-----Original Message----- > >From: Camelia Alexandra Groza (OSS) <camelia.gr...@oss.nxp.com> > >Sent: Friday, April 9, 2021 7:53 PM > >To: u-boot@lists.denx.de; Priyanka Jain <priyanka.j...@nxp.com>; > w...@denx.de; > >Shengzhou Liu <shengzhou....@nxp.com>; Z.q. Hou > <zhiqiang....@nxp.com> > >Cc: Madalin Bucur (OSS) <madalin.bu...@oss.nxp.com>; Camelia Alexandra > >Groza <camelia.gr...@nxp.com> > >Subject: [PATCH 01/11] powerpc: dts: t2080: add QorIQ DPAA 1 FMan v3 > nodes > > > >From: Camelia Groza <camelia.gr...@nxp.com> > > > >Add the QorIQ DPAA 1 FMan v3 device tree nodes for the T2080 SoC. > >The device tree nodes are copied over with little modification from the > Linux > >kernel source code. > > > >Signed-off-by: Camelia Groza <camelia.gr...@nxp.com> > >--- > > arch/powerpc/dts/t2080si-post.dtsi | 51 > ++++++++++++++++++++++++++++++ > > 1 file changed, 51 insertions(+) > > create mode 100644 arch/powerpc/dts/t2080si-post.dtsi > > > >diff --git a/arch/powerpc/dts/t2080si-post.dtsi > b/arch/powerpc/dts/t2080si- > >post.dtsi > >new file mode 100644 > >index 000000000000..d8ef579cb7c0 > >--- /dev/null > >+++ b/arch/powerpc/dts/t2080si-post.dtsi > >@@ -0,0 +1,51 @@ > >+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > >+/* > >+ * T2080 Silicon/SoC Device Tree Source (post include) > >+ * > >+ * Copyright 2013 Freescale Semiconductor Inc. > >+ * Copyright 2021 NXP > >+ * > >+ */ > >+&soc { > >+ > >+/include/ "qoriq-clockgen2.dtsi" > >+/include/ "qoriq-gpio-0.dtsi" > >+/include/ "qoriq-gpio-1.dtsi" > >+/include/ "qoriq-gpio-2.dtsi" > >+/include/ "qoriq-gpio-3.dtsi" > >+ > >+/include/ "qoriq-fman3-0.dtsi" > >+/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi" > >+/include/ "qoriq-fman3-0-10g-1-best-effort.dtsi" > >+/include/ "qoriq-fman3-0-1g-2.dtsi" > >+/include/ "qoriq-fman3-0-1g-3.dtsi" > >+/include/ "qoriq-fman3-0-10g-0.dtsi" > >+/include/ "qoriq-fman3-0-10g-1.dtsi" > >+ fman@400000 { > >+ enet0: ethernet@e0000 { > >+ }; > >+ > >+ enet1: ethernet@e2000 { > >+ }; > >+ > >+ enet2: ethernet@e4000 { > >+ }; > >+ > >+ enet3: ethernet@e6000 { > >+ }; > >+ > >+ enet6: ethernet@f0000 { > >+ }; > >+ > >+ enet7: ethernet@f2000 { > >+ }; > >+ > >+ mdio@fc000 { > >+ interrupts = <100 1 0 0>; > >+ }; > >+ > >+ mdio@fd000 { > >+ interrupts = <101 1 0 0>; > >+ }; > >+ }; > >+}; > >-- > >2.17.1 > > Kindly check build failure of T1042D4RDB_SECURE_BOOT board with this > series > Details at https://dev.azure.com/u-boot/a1096300-2999-4ec4-a21a- > 4c22075e3771/_apis/build/builds/2112/logs/595
Sure, I'll send a v2. Thank you. Camelia