In message <20101019220814.50ea1136...@gemini.denx.de> I wrote: > The following changes since commit 1ba91ba23396005ef7b42381cc21f0baf78d0d60: > > dlmalloc.c: Fix gcc alias warning (2010-10-18 22:44:31 +0200) > > are available in the git repository at: > git://git.denx.de/u-boot-arm.git master > > Albert Aribaud (2): > arm: implement ELF relocations > edminiv2: add support for ELF relocations > > Andreas Bießmann (3): > at91rm9200ek: convert to at91 > at91rm9200: enable USB support > at91rm9200ek: enbable USB support > > Eric Cooper (1): > Makefile: rename TEXT_BASE to CONFIG_SYS_TEXT_BASE > > Heiko Schocher (4): > arm926ejs, magnesium: add support for ELF relocations > arm926ejs, tx25: add support for ELF relocations > armv7, beagle: add support for ELF relocations > arm1136, qong: add support for ELF relocations > > Jason Liu (2): > MX5: rename mx51 to mx5 > MX5: Remove dead code with ENABLE_IMPRECISE_ABORT > > Jens Scharsig (1): > update board EB+CPUx9K2 > > John Rigby (7): > common/image.c fix length calculation in boot_relocate_fdt > common/image.c remove extra calls to be32_to_cpu in boot_get_fdt > FDT: Add fixup support for multiple banks of memory > FDT: only call boot_get_fdt from generic code > boot: change some arch ifdefs to feature ifdefs > ARM: add flat device tree support > ARM: enable device tree for beagle > > Magnus Lilja (1): > i.MX31: Fix Litekit board to use new ARM relocation support. > > Marek Vasut (19): > PXA: pxafb: Fix indent problems > PXA: pxa-regs.h cleanup > PXA: pxafb: Add ACX517AKN support > PXA: pxafb: Add support for Sharp LQ038J7DH53 > PXA: pxafb: Marvell Littleton LCD definition > common: Enable serial for PXA250 > PXA: Palm Tungsten|C Support > PXA: Add initial Palm LifeDrive support > PXA: Voipac270 improvements > PXA: Balloon3 board support > PXA: Add missing MAINTAINERS entries > PXA: Add necessary information for RELOC > PXA: Fix reloc, Push lowlevel init into C code > PXA: Fix vpac270 for Reloc > PXA: Fix ZipitZ2 for Reloc > PXA: Fix Balloon3 for Reloc > PXA: Fix vpac270 OneNAND booter > Build: PXA: Fix Vpac270 build variants > Build: PXA: Fix TrizepsIV build variants > > Mikhail Kshevetskiy (4): > PXA: remove unused u-boot.lds from board/vpac270 > PXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000 > PXA: fix environment sector size, kernel and environment location for> > vpac270 > PXA: fix MDREFR[APD] bit setting > > Reinhard Meyer (1): > AT91 clock/timer: move static data to global_data struct > > Stefano Babic (1): > MX31: add delay between USB port setup and reset > > Wolfgang Denk (4): > QONG: fix and update board config file > Merge branch 'master' of git://git.denx.de/u-boot-imx > Merge branch 'elf_reloc' > Merge branch 'at91' of git://git.denx.de/u-boot-atmel > > MAINTAINERS | 13 + > MAKEALL | 7 +- > Makefile | 19 +- > README | 13 + > arch/arm/config.mk | 12 +- > arch/arm/cpu/arm1136/start.S | 171 +- > arch/arm/cpu/arm1136/u-boot.lds | 15 +- > arch/arm/cpu/arm926ejs/at91/clock.c | 55 +- > arch/arm/cpu/arm926ejs/at91/timer.c | 85 +- > arch/arm/cpu/arm926ejs/start.S | 162 +- > arch/arm/cpu/arm926ejs/u-boot.lds | 26 +- > arch/arm/cpu/armv7/{mx51 => mx5}/Makefile | 0 > arch/arm/cpu/armv7/{mx51 => mx5}/clock.c | 42 +- > arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c | 2 +- > arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S | 14 - > arch/arm/cpu/armv7/{mx51 => mx5}/soc.c | 28 +- > arch/arm/cpu/armv7/{mx51 => mx5}/speed.c | 0 > arch/arm/cpu/armv7/{mx51 => mx5}/timer.c | 8 +- > arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds | 0 > arch/arm/cpu/armv7/start.S | 131 +- > arch/arm/cpu/armv7/u-boot.lds | 7 + > arch/arm/cpu/pxa/cpu.c | 255 ++- > arch/arm/cpu/pxa/i2c.c | 69 +- > arch/arm/cpu/pxa/pxafb.c | 365 ++- > arch/arm/cpu/pxa/start.S | 344 +-- > arch/arm/cpu/pxa/timer.c | 7 +- > arch/arm/cpu/pxa/usb.c | 61 +- > arch/arm/include/asm/arch-at91/hardware.h | 1 + > .../asm/{arch-mx51 => arch-mx5}/asm-offsets.h | 0 > .../include/asm/{arch-mx51 => arch-mx5}/clock.h | 0 > .../include/asm/{arch-mx51 => arch-mx5}/crm_regs.h | 0 > .../include/asm/{arch-mx51 => arch-mx5}/imx-regs.h | 0 > .../include/asm/{arch-mx51 => arch-mx5}/iomux.h | 8 +- > .../mx51_pins.h => arch-mx5/mx5x_pins.h} | 6 +- > .../asm/{arch-mx51 => arch-mx5}/sys_proto.h | 0 > arch/arm/include/asm/arch-pxa/hardware.h | 61 +- > arch/arm/include/asm/arch-pxa/macro.h | 20 +- > arch/arm/include/asm/arch-pxa/pxa-regs.h | 2688 +++++++++++-----> > ---- > arch/arm/include/asm/config.h | 5 +- > arch/arm/include/asm/global_data.h | 14 + > arch/arm/include/asm/u-boot-arm.h | 14 +- > arch/arm/lib/board.c | 8 +- > arch/arm/lib/bootm.c | 137 +- > arch/arm/lib/cache.c | 2 +- > arch/m68k/include/asm/config.h | 3 + > arch/microblaze/lib/bootm.c | 14 +- > arch/nios2/lib/bootm.c | 8 +- > arch/powerpc/include/asm/config.h | 3 + > arch/sparc/include/asm/config.h | 1 + > board/BuS/eb_cpux9k2/config.mk | 1 - > board/BuS/eb_cpux9k2/cpux9k2.c | 7 +- > board/LaCie/edminiv2/config.mk | 3 +- > board/atmel/at91rm9200ek/Makefile | 5 - > board/atmel/at91rm9200ek/at91rm9200ek.c | 60 +- > board/atmel/at91rm9200ek/config.mk | 3 +- > board/atmel/at91rm9200ek/led.c | 58 +- > board/atmel/at91rm9200ek/mux.c | 38 - > .../arm/cpu/armv7/mx51 => board/balloon3}/Makefile | 27 +- > board/balloon3/balloon3.c | 238 ++ > board/colibri_pxa270/colibri_pxa270.c | 33 +- > board/cradle/cradle.c | 5 +- > board/cradle/lowlevel_init.S | 4 +- > board/csb226/csb226.c | 13 +- > board/delta/delta.c | 37 +- > board/delta/nand.c | 110 +- > board/freescale/mx51evk/mx51evk.c | 2 +- > board/innokom/innokom.c | 14 +- > board/karo/tx25/config.mk | 2 +- > board/logicpd/imx27lite/config.mk | 4 + > board/logicpd/imx31_litekit/config.mk | 2 +- > board/logicpd/imx31_litekit/imx31_litekit.c | 10 +- > {arch/arm/cpu/armv7/mx51 => board/palmld}/Makefile | 27 +- > board/palmld/config.mk | 1 + > board/{zipitz2 => palmld}/lowlevel_init.S | 9 +- > board/palmld/palmld.c | 69 + > board/{vpac270 => palmld}/u-boot.lds | 7 +- > {arch/arm/cpu/armv7/mx51 => board/palmtc}/Makefile | 27 +- > board/palmtc/config.mk | 1 + > board/{vpac270 => palmtc}/lowlevel_init.S | 3 +- > .../at91rm9200ek/partition.c => palmtc/palmtc.c} | 61 +- > .../at91rm9200ek/misc.c => palmtc/u-boot.lds} | 50 +- > board/pxa255_idp/pxa_idp.c | 27 +- > board/trizepsiv/conxs.c | 35 +- > board/ttcontrol/vision2/vision2.c | 2 +- > board/vpac270/Makefile | 17 +- > board/vpac270/config.mk | 1 - > board/vpac270/vpac270.c | 92 +- > board/wepep250/wepep250.c | 11 +- > board/zipitz2/Makefile | 10 +- > board/zipitz2/config.mk | 1 - > board/zipitz2/zipitz2.c | 57 +- > board/zylonite/nand.c | 110 +- > boards.cfg | 14 +- > common/cmd_bootm.c | 6 +- > common/fdt_support.c | 86 +- > common/image.c | 16 +- > common/serial.c | 2 +- > doc/README.arm-relocation | 222 +-- > drivers/mmc/pxa_mmc.c | 98 +- > drivers/serial/serial_pxa.c | 94 +- > drivers/usb/host/ehci-mxc.c | 2 + > include/configs/at91rm9200ek.h | 286 +-- > include/configs/balloon3.h | 274 ++ > include/configs/cerf250.h | 3 + > include/configs/colibri_pxa270.h | 3 + > include/configs/cradle.h | 5 +- > include/configs/csb226.h | 3 + > include/configs/delta.h | 4 + > include/configs/eb_cpux9k2.h | 23 +- > include/configs/edminiv2.h | 5 + > include/configs/imx31_litekit.h | 7 + > include/configs/innokom.h | 3 + > include/configs/lubbock.h | 3 + > include/configs/mx51evk.h | 4 +- > include/configs/omap3_beagle.h | 9 + > include/configs/palmld.h | 276 ++ > include/configs/palmtc.h | 248 ++ > include/configs/pleb2.h | 3 + > include/configs/pxa255_idp.h | 3 + > include/configs/qong.h | 32 +- > include/configs/trizepsiv.h | 3 + > include/configs/tx25.h | 2 +- > include/configs/vision2.h | 4 +- > include/configs/vpac270.h | 138 +- > include/configs/wepep250.h | 4 + > include/configs/xaeniax.h | 3 + > include/configs/xm250.h | 3 + > include/configs/xsengine.h | 3 + > include/configs/zipitz2.h | 10 +- > include/configs/zylonite.h | 3 + > include/fdt_support.h | 1 + > include/image.h | 9 +- > nand_spl/board/karo/tx25/u-boot.lds | 13 + > onenand_ipl/board/vpac270/Makefile | 5 +- > 134 files changed, 4843 insertions(+), 3290 deletions(-) > copy arch/arm/cpu/armv7/{mx51 => mx5}/Makefile (100%) > rename arch/arm/cpu/armv7/{mx51 => mx5}/clock.c (85%) > rename arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c (99%) > rename arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S (95%) > rename arch/arm/cpu/armv7/{mx51 => mx5}/soc.c (81%) > rename arch/arm/cpu/armv7/{mx51 => mx5}/speed.c (100%) > rename arch/arm/cpu/armv7/{mx51 => mx5}/timer.c (92%) > rename arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds (100%) > rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/asm-offsets.h (100%) > rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/clock.h (100%) > rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/crm_regs.h (100%) > rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/imx-regs.h (100%) > rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/iomux.h (98%) > rename arch/arm/include/asm/{arch-mx51/mx51_pins.h => arch-mx5/mx5x_pins> > .h} (99%) > rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/sys_proto.h (100%) > delete mode 100644 board/BuS/eb_cpux9k2/config.mk > delete mode 100644 board/atmel/at91rm9200ek/mux.c > copy {arch/arm/cpu/armv7/mx51 => board/balloon3}/Makefile (70%) > create mode 100644 board/balloon3/balloon3.c > copy {arch/arm/cpu/armv7/mx51 => board/palmld}/Makefile (70%) > create mode 100644 board/palmld/config.mk > rename board/{zipitz2 => palmld}/lowlevel_init.S (90%) > create mode 100644 board/palmld/palmld.c > rename board/{vpac270 => palmld}/u-boot.lds (90%) > rename {arch/arm/cpu/armv7/mx51 => board/palmtc}/Makefile (70%) > create mode 100644 board/palmtc/config.mk > rename board/{vpac270 => palmtc}/lowlevel_init.S (95%) > rename board/{atmel/at91rm9200ek/partition.c => palmtc/palmtc.c} (50%) > rename board/{atmel/at91rm9200ek/misc.c => palmtc/u-boot.lds} (57%) > delete mode 100644 board/vpac270/config.mk > delete mode 100644 board/zipitz2/config.mk > create mode 100644 include/configs/balloon3.h > create mode 100644 include/configs/palmld.h > create mode 100644 include/configs/palmtc.h
Applied. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de If the facts don't fit the theory, change the facts. -- Albert Einstein _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot