Hi Reto, On 14.04.21 16:49, Reto Schneider wrote:
From: Reto Schneider <reto.schnei...@husqvarnagroup.com>This commit updates the default config with the values that are actually used "in the wild" and which are close to what is used on the MediaTek MT7688 based, 2nd generation of the GARDENA smart gateway: - Reduce startup time by setting bootdelay to 0 (still allows accessing the shell, one just has to send a key press quicker) - Adjusting U-Boot environment volume names and MTD partitions to the actual layout Signed-off-by: Reto Schneider <reto.schnei...@husqvarnagroup.com> --- configs/gardena-smart-gateway-at91sam_defconfig | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig index e3d5bc47d6..76a1c42ce0 100644 --- a/configs/gardena-smart-gateway-at91sam_defconfig +++ b/configs/gardena-smart-gateway-at91sam_defconfig @@ -24,6 +24,7 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3
Please see below...
CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw" +CONFIG_BOOTDELAY=0
I'm wondering if this defconfig was generated via make savedefconfig? As there are multiple configurations for BOOTDELAY. Could you please double-check again? Other than that: Reviewed-by: Stefan Roese <s...@denx.de> Thanks, Stefan
CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y @@ -46,8 +47,8 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=nand0" -CONFIG_MTDPARTS_DEFAULT="nand0:1536k(uboot),1024k(unused),512k(dtb_old),4608k(kernel_old),86528k(ubi),-(rootfs_old)" +CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand" +CONFIG_MTDPARTS_DEFAULT="atmel_nand:1536k(uboot),10752k(unused),-(ubi)" CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y @@ -55,8 +56,8 @@ CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt CONFIG_ENV_IS_IN_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_UBI_PART="ubi" -CONFIG_ENV_UBI_VOLUME="env" -CONFIG_ENV_UBI_VOLUME_REDUND="env_r" +CONFIG_ENV_UBI_VOLUME="uboot_env0" +CONFIG_ENV_UBI_VOLUME_REDUND="uboot_env1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y
Viele Grüße, Stefan -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
