> From: Priit Laes <priit.l...@paf.com> > Current setup instructions for i.MX8QM MEK board include somewhat > conflicting instructions, so here's an attempt to fix it. > After trying both sets of firmwares, I can conclude that both of > them fail to work: > - no boot at all with imx-sc-firmware-0.7 / firmware-imx-7.6 > - partial success with imx-sc-firmware-1.1 / firmware-imx-8.0: > U-Boot 2021.04-rc3-00135-ge0669a43c8 (Mar 08 2021 - 16:49:08 +0200) > CPU: NXP i.MX8QM RevB A53 at 1200 MHz > Model: Freescale i.MX8QM MEK > Board: iMX8QM MEK > mu_hal_receivemsg timeout > Build: SCFW 65afe5f6, SECO-FW 65afe5f6, ATF a-20190 > mu_hal_receivemsg timeout > sc_misc_get_boot_dev: res:16 > Boot: SD0 > DRAM: mu_hal_sendmsg timeout > sc_rm_is_memreg_owned: mr:0 res:21 > ... > Signed-off-by: Priit Laes <priit.l...@paf.com> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================