All si570 which are used for ps reference clock generation should contain silabs,skip-recall property not to cause break on ps clock. On Versal boards this will cause hang on Versal cpu when it is booted at the same time with SC.
Signed-off-by: Michal Simek <michal.si...@xilinx.com> --- arch/arm/dts/zynqmp-e-a2197-00-revA.dts | 1 + arch/arm/dts/zynqmp-m-a2197-01-revA.dts | 3 ++- arch/arm/dts/zynqmp-m-a2197-02-revA.dts | 3 ++- arch/arm/dts/zynqmp-m-a2197-03-revA.dts | 3 ++- arch/arm/dts/zynqmp-p-a2197-00-revA.dts | 1 + 5 files changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts index aae3c626f562..135c83f502e8 100644 --- a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts @@ -475,6 +475,7 @@ factory-fout = <33333333>; clock-frequency = <33333333>; clock-output-names = "ref_clk"; + silabs,skip-recall; }; /* and connector J212D */ }; diff --git a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts index 19e1ebdb1d6a..213149a3dc83 100644 --- a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts +++ b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts @@ -343,9 +343,10 @@ compatible = "silabs,si570"; reg = <0x5d>; /* FIXME addr */ temperature-stability = <50>; - factory-fout = <156250000>; /* FIXME every chip can be different */ + factory-fout = <33333333>; clock-frequency = <33333333>; clock-output-names = "REF_CLK"; /* FIXME */ + silabs,skip-recall; }; /* Connection via Samtec U20D */ /* Use for storing information about X-PRC card */ diff --git a/arch/arm/dts/zynqmp-m-a2197-02-revA.dts b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts index 46ec427648fa..c458110e5a89 100644 --- a/arch/arm/dts/zynqmp-m-a2197-02-revA.dts +++ b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts @@ -349,9 +349,10 @@ compatible = "silabs,si570"; reg = <0x5d>; /* FIXME addr */ temperature-stability = <50>; - factory-fout = <156250000>; /* FIXME every chip can be different */ + factory-fout = <33333333>; clock-frequency = <33333333>; clock-output-names = "REF_CLK"; /* FIXME */ + silabs,skip-recall; }; /* Connection via Samtec U20D */ /* Use for storing information about X-PRC card */ diff --git a/arch/arm/dts/zynqmp-m-a2197-03-revA.dts b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts index 6eb58e6701ad..cee7ca1fa995 100644 --- a/arch/arm/dts/zynqmp-m-a2197-03-revA.dts +++ b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts @@ -339,9 +339,10 @@ compatible = "silabs,si570"; reg = <0x5d>; /* FIXME addr */ temperature-stability = <50>; - factory-fout = <156250000>; /* FIXME every chip can be different */ + factory-fout = <33333333>; clock-frequency = <33333333>; clock-output-names = "REF_CLK"; /* FIXME */ + silabs,skip-recall; }; /* Connection via Samtec U20D */ /* Use for storing information about X-PRC card */ diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts index 4f7824ae4007..8e1e6b7f903b 100644 --- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts @@ -390,6 +390,7 @@ factory-fout = <33333333>; clock-frequency = <33333333>; clock-output-names = "ref_clk"; + silabs,skip-recall; }; /* Connection via Samtec J212D */ /* Use for storing information about X-PRC card */ -- 2.31.1