From: MengLi <meng...@windriver.com> In uboot command line environment, watchdog is not able to be stopped with below commands: SOCFPGA_STRATIX10 # wdt dev watchdog@ffd00200 SOCFPGA_STRATIX10 # wdt stop Refer to watchdog driver in linux kernel, it is also need to reset watchdog after disable it so that the disable action takes effect.
Signed-off-by: Meng Li <meng...@windriver.com> Reviewed-by: Stefan Roese <s...@denx.de> --- v4: Remove the unauthorized signature. v3: Add the resets to designware_wdt_priv and initialize it in probe(). v2: Change "#if CONFIG_IS_ENABLED(DM_RESET)" into "if (CONFIG_IS_ENABLED(DM_RESET)) {", and define the variable into if condition sentence. --- drivers/watchdog/designware_wdt.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) diff --git a/drivers/watchdog/designware_wdt.c b/drivers/watchdog/designware_wdt.c index 12f09a7a39..cdf6b5709b 100644 --- a/drivers/watchdog/designware_wdt.c +++ b/drivers/watchdog/designware_wdt.c @@ -23,6 +23,7 @@ struct designware_wdt_priv { void __iomem *base; unsigned int clk_khz; + struct reset_ctl_bulk *resets; }; /* @@ -96,6 +97,18 @@ static int designware_wdt_stop(struct udevice *dev) designware_wdt_reset(dev); writel(0, priv->base + DW_WDT_CR); + if (CONFIG_IS_ENABLED(DM_RESET)) { + int ret; + + ret = reset_assert_bulk(priv->resets); + if (ret) + return ret; + + ret = reset_deassert_bulk(priv->resets); + if (ret) + return ret; + } + return 0; } @@ -143,13 +143,11 @@ static int designware_wdt_probe(struct udevice *dev) #endif if (CONFIG_IS_ENABLED(DM_RESET)) { - struct reset_ctl_bulk resets; - - ret = reset_get_bulk(dev, &resets); + ret = reset_get_bulk(dev, priv->resets); if (ret) goto err; - ret = reset_deassert_bulk(&resets); + ret = reset_deassert_bulk((priv->resets); if (ret) goto err; } -- 2.17.1