On Tue, 4 May 2021 19:31:27 +0200 Kory Maincent <kory.mainc...@bootlin.com> wrote:
> Add the extension_board_scan specific function to scan the information > of the EEPROM on one-wire and fill the extension struct. > Add the Kconfig symbol to enable the needs to detect DIPs. > > Signed-off-by: Kory Maincent <kory.mainc...@bootlin.com> > Reviewed-by: Maxime Ripard <max...@cerno.tech> We needlessly compile this for the SPL, but the toolchain garbage collection is clever enough to discard this, so it's not a problem. Acked-by: Andre Przywara <andre.przyw...@arm.com> Thanks, Andre > --- > > Change since v1: > - Replace TARGET_CHIP options by CHIP_DIP_SCAN > > Change since v2: > - Fix typo > - Place the Kconfig symbol in that patch > > Change since v3: > - Replace imply CMD_EXTENSION by select option. Remove the build test on > CMD_EXTENSION in the chip.c file. > > arch/arm/mach-sunxi/Kconfig | 9 ++++ > board/sunxi/Makefile | 1 + > board/sunxi/chip.c | 100 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 110 insertions(+) > create mode 100644 board/sunxi/chip.c > > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig > index 8e9012dbbf..bc8509b72a 100644 > --- a/arch/arm/mach-sunxi/Kconfig > +++ b/arch/arm/mach-sunxi/Kconfig > @@ -1089,3 +1089,12 @@ config BLUETOOTH_DT_DEVICE_FIXUP > flipped elsewise. > > endif > + > +config CHIP_DIP_SCAN > + bool "Enable DIPs detection for CHIP board" > + select SUPPORT_EXTENSION_SCAN > + select W1 > + select W1_GPIO > + select W1_EEPROM > + select W1_EEPROM_DS24XXX > + select CMD_EXTENSION > diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile > index c4e13f8c38..d96b7897b6 100644 > --- a/board/sunxi/Makefile > +++ b/board/sunxi/Makefile > @@ -11,3 +11,4 @@ obj-$(CONFIG_SUN7I_GMAC) += gmac.o > obj-$(CONFIG_MACH_SUN4I) += dram_sun4i_auto.o > obj-$(CONFIG_MACH_SUN5I) += dram_sun5i_auto.o > obj-$(CONFIG_MACH_SUN7I) += dram_sun5i_auto.o > +obj-$(CONFIG_CHIP_DIP_SCAN) += chip.o > diff --git a/board/sunxi/chip.c b/board/sunxi/chip.c > new file mode 100644 > index 0000000000..cde04bebe9 > --- /dev/null > +++ b/board/sunxi/chip.c > @@ -0,0 +1,100 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * (C) Copyright 2021 > + * Köry Maincent, Bootlin, <kory.mainc...@bootlin.com> > + * Based on initial code from Maxime Ripard > + */ > + > +#include <common.h> > +#include <malloc.h> > +#include <dm.h> > +#include <w1.h> > +#include <w1-eeprom.h> > +#include <dm/device-internal.h> > + > +#include <asm/arch/gpio.h> > + > +#include <extension_board.h> > + > +#define for_each_w1_device(b, d) \ > + for (device_find_first_child(b, d); *d; device_find_next_child(d)) > + > +#define dip_convert(field) \ > + ( \ > + (sizeof(field) == 1) ? field : \ > + (sizeof(field) == 2) ? be16_to_cpu(field) : \ > + (sizeof(field) == 4) ? be32_to_cpu(field) : \ > + -1 \ > + ) > + > +#define DIP_MAGIC 0x50494843 /* CHIP */ > + > +struct dip_w1_header { > + u32 magic; /* CHIP */ > + u8 version; /* spec version */ > + u32 vendor_id; > + u16 product_id; > + u8 product_version; > + char vendor_name[32]; > + char product_name[32]; > + u8 rsvd[36]; /* rsvd for future spec versions */ > + u8 data[16]; /* user data, per-dip specific */ > +} __packed; > + > +int extension_board_scan(struct list_head *extension_list) > +{ > + struct extension *dip; > + struct dip_w1_header w1_header; > + struct udevice *bus, *dev; > + u32 vid; > + u16 pid; > + int ret; > + > + int num_dip = 0; > + > + sunxi_gpio_set_pull(SUNXI_GPD(2), SUNXI_GPIO_PULL_UP); > + > + ret = w1_get_bus(0, &bus); > + if (ret) { > + printf("one wire interface not found\n"); > + return 0; > + } > + > + for_each_w1_device(bus, &dev) { > + if (w1_get_device_family(dev) != W1_FAMILY_DS2431) > + continue; > + > + ret = device_probe(dev); > + if (ret) { > + printf("Couldn't probe device %s: error %d", > + dev->name, ret); > + continue; > + } > + > + w1_eeprom_read_buf(dev, 0, (u8 *)&w1_header, sizeof(w1_header)); > + > + if (w1_header.magic != DIP_MAGIC) > + continue; > + > + vid = dip_convert(w1_header.vendor_id); > + pid = dip_convert(w1_header.product_id); > + > + printf("DIP: %s (0x%x) from %s (0x%x)\n", > + w1_header.product_name, pid, > + w1_header.vendor_name, vid); > + > + dip = calloc(1, sizeof(struct extension)); > + if (!dip) { > + printf("Error in memory allocation\n"); > + return num_dip; > + } > + > + snprintf(dip->overlay, sizeof(dip->overlay), "dip-%x-%x.dtbo", > + vid, pid); > + strncpy(dip->name, w1_header.product_name, 32); > + strncpy(dip->owner, w1_header.vendor_name, 32); > + list_add_tail(&dip->list, extension_list); > + num_dip++; > + } > + return num_dip; > +}