This patch removes the header check for UART download;
the check of checksum is not mandatory with even parity and chuck
checksum for each 256 received bytes and it is only done for
STM32 image (FSBL = TF-A BL2), not for FIT image.

This patch solve issue of duplicated 0x100 byte written with FIP header.

Fixes: 4fb7b3e10891 ("stm32mp: stm32prog: add FIP header support")
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
---

 .../mach-stm32mp/cmd_stm32prog/stm32prog.c    |  14 +-
 .../mach-stm32mp/cmd_stm32prog/stm32prog.h    |   5 -
 .../cmd_stm32prog/stm32prog_serial.c          | 151 ++----------------
 3 files changed, 22 insertions(+), 148 deletions(-)

diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c 
b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
index 4c4d8a7a69..84b880261a 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
@@ -369,23 +369,24 @@ static int parse_flash_layout(struct stm32prog_data *data,
        bool end_of_line, eof;
        char *p, *start, *last, *col;
        struct stm32prog_part_t *part;
+       struct image_header_s header;
        int part_list_size;
        int i;
 
        data->part_nb = 0;
 
        /* check if STM32image is detected */
-       stm32prog_header_check((struct raw_header_s *)addr, &data->header);
-       if (data->header.type == HEADER_STM32IMAGE) {
+       stm32prog_header_check((struct raw_header_s *)addr, &header);
+       if (header.type == HEADER_STM32IMAGE) {
                u32 checksum;
 
                addr = addr + BL_HEADER_SIZE;
-               size = data->header.image_length;
+               size = header.image_length;
 
-               checksum = stm32prog_header_checksum(addr, &data->header);
-               if (checksum != data->header.image_checksum) {
+               checksum = stm32prog_header_checksum(addr, &header);
+               if (checksum != header.image_checksum) {
                        stm32prog_err("Layout: invalid checksum : 0x%x expected 
0x%x",
-                                     checksum, data->header.image_checksum);
+                                     checksum, header.image_checksum);
                        return -EIO;
                }
        }
@@ -1727,7 +1728,6 @@ void stm32prog_clean(struct stm32prog_data *data)
        free(data->part_array);
        free(data->otp_part);
        free(data->buffer);
-       free(data->header_data);
 }
 
 /* DFU callback: used after serial and direct DFU USB access */
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h 
b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
index 581b10d0ac..ad404879a7 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
@@ -132,14 +132,9 @@ struct stm32prog_data {
        u32                     *otp_part;
        u8                      pmic_part[PMIC_SIZE];
 
-       /* STM32 header information */
-       struct raw_header_s     *header_data;
-       struct image_header_s   header;
-
        /* SERIAL information */
        u32     cursor;
        u32     packet_number;
-       u32     checksum;
        u8      *buffer; /* size = USART_RAM_BUFFER_SIZE*/
        int     dfu_seq;
        u8      read_phase;
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c 
b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
index 2b92e3b149..7eca86c11b 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
@@ -292,56 +292,6 @@ static void stm32prog_serial_putc(u8 w_byte)
 }
 
 /* Helper function ************************************************/
-
-static u8 stm32prog_header(struct stm32prog_data *data)
-{
-       u8 ret;
-       u8 boot = 0;
-       struct dfu_entity *dfu_entity;
-       u64 size = 0;
-
-       dfu_entity = stm32prog_get_entity(data);
-       if (!dfu_entity)
-               return -ENODEV;
-
-       printf("\nSTM32 download write %s\n", dfu_entity->name);
-
-       /* force cleanup to avoid issue with previous read */
-       dfu_transaction_cleanup(dfu_entity);
-
-       stm32prog_header_check(data->header_data, &data->header);
-
-       /* no stm32 image header : max size is partition size */
-       if (data->header.type != HEADER_STM32IMAGE) {
-               dfu_entity->get_medium_size(dfu_entity, &size);
-               data->header.image_length = size;
-       }
-
-       /**** Flash the header if necessary for boot partition */
-       if (data->phase < PHASE_FIRST_USER)
-               boot = 1;
-
-       /* write header if boot partition */
-       if (boot) {
-               if (ret) {
-                       stm32prog_err("invalid header (error %d)", ret);
-               } else {
-                       ret = stm32prog_write(data,
-                                             (u8 *)data->header_data,
-                                             BL_HEADER_SIZE);
-               }
-       } else {
-               if (ret)
-                       printf("  partition without checksum\n");
-               ret = 0;
-       }
-
-       free(data->header_data);
-       data->header_data = NULL;
-
-       return ret;
-}
-
 static u8 stm32prog_start(struct stm32prog_data *data, u32 address)
 {
        u8 ret = 0;
@@ -388,23 +338,6 @@ static u8 stm32prog_start(struct stm32prog_data *data, u32 
address)
                data->dfu_seq = 0;
 
                printf("\n  received length = 0x%x\n", data->cursor);
-               if (data->header.type == HEADER_STM32IMAGE) {
-                       if (data->cursor !=
-                           (data->header.image_length + BL_HEADER_SIZE)) {
-                               stm32prog_err("transmission interrupted 
(length=0x%x expected=0x%x)",
-                                             data->cursor,
-                                             data->header.image_length +
-                                             BL_HEADER_SIZE);
-                               return -EIO;
-                       }
-                       if (data->header.image_checksum != data->checksum) {
-                               stm32prog_err("invalid checksum received (0x%x 
expected 0x%x)",
-                                             data->checksum,
-                                             data->header.image_checksum);
-                               return -EIO;
-                       }
-                       printf("\n  checksum OK (0x%x)\n", data->checksum);
-               }
 
                /* update DFU with received flashlayout */
                if (data->phase == PHASE_FLASHLAYOUT)
@@ -627,14 +560,12 @@ static void download_command(struct stm32prog_data *data)
        u32 counter = 0x0, codesize = 0x0;
        u8 *ramaddress = 0;
        u8 rcv_data = 0x0;
-       struct image_header_s *image_header = &data->header;
        u32 cursor = data->cursor;
        long size = 0;
        u8 operation;
        u32 packet_number;
        u32 result = ACK_BYTE;
        u8 ret;
-       unsigned int i;
        bool error;
        int rcv;
 
@@ -668,13 +599,8 @@ static void download_command(struct stm32prog_data *data)
        if (packet_number == 0) {
                /* erase: re-initialize the image_header struct */
                data->packet_number = 0;
-               if (data->header_data)
-                       memset(data->header_data, 0, BL_HEADER_SIZE);
-               else
-                       data->header_data = calloc(1, BL_HEADER_SIZE);
                cursor = 0;
                data->cursor = 0;
-               data->checksum = 0;
                /*idx = cursor;*/
        } else {
                data->packet_number++;
@@ -746,74 +672,27 @@ static void download_command(struct stm32prog_data *data)
                goto end;
        }
 
-       /* Update current position in buffer */
-       data->cursor += codesize;
-
-       if (operation == PHASE_OTP) {
-               size = data->cursor - cursor;
-               /* no header for OTP */
-               if (stm32prog_otp_write(data, cursor,
-                                       data->buffer, &size))
-                       result = ABORT_BYTE;
-               goto end;
-       }
+       switch (operation) {
+       case PHASE_OTP:
+               size = codesize;
+               ret = stm32prog_otp_write(data, cursor, data->buffer, &size);
+               break;
 
-       if (operation == PHASE_PMIC) {
-               size = data->cursor - cursor;
-               /* no header for PMIC */
-               if (stm32prog_pmic_write(data, cursor,
-                                        data->buffer, &size))
-                       result = ABORT_BYTE;
-               goto end;
-       }
+       case PHASE_PMIC:
+               size = codesize;
+               ret = stm32prog_pmic_write(data, cursor, data->buffer, &size);
+               break;
 
-       if (cursor < BL_HEADER_SIZE) {
-               /* size = portion of header in this chunck */
-               if (data->cursor >= BL_HEADER_SIZE)
-                       size = BL_HEADER_SIZE - cursor;
-               else
-                       size = data->cursor - cursor;
-               memcpy((void *)((u32)(data->header_data) + cursor),
-                      data->buffer, size);
-               cursor += size;
-
-               if (cursor == BL_HEADER_SIZE) {
-                       /* Check and Write the header */
-                       if (stm32prog_header(data)) {
-                               result = ABORT_BYTE;
-                               goto end;
-                       }
-               } else {
-                       goto end;
-               }
+       default:
+               ret = stm32prog_write(data, data->buffer, codesize);
+               break;
        }
 
-       if (data->header.type == HEADER_STM32IMAGE) {
-               if (data->cursor <= BL_HEADER_SIZE)
-                       goto end;
-               /* compute checksum on payload */
-               for (i = (unsigned long)size; i < codesize; i++)
-                       data->checksum += data->buffer[i];
-
-               if (data->cursor >
-                   image_header->image_length + BL_HEADER_SIZE) {
-                       log_err("expected size exceeded\n");
-                       result = ABORT_BYTE;
-                       goto end;
-               }
-
-               /* write data (payload) */
-               ret = stm32prog_write(data,
-                                     &data->buffer[size],
-                                     codesize - size);
-       } else {
-               /* write all */
-               ret = stm32prog_write(data,
-                                     data->buffer,
-                                     codesize);
-       }
        if (ret)
                result = ABORT_BYTE;
+       else
+               /* Update current position in buffer */
+               data->cursor += codesize;
 
 end:
        stm32prog_serial_result(result);
-- 
2.17.1

Reply via email to