Add memory and I2C posts to the XPedite517x/520x/537x board families.

Signed-off-by: Peter Tyser <pty...@xes-inc.com>
CC: Kumar Gala <ga...@kernel.crashing.org>
---
 include/configs/xpedite517x.h |   17 +++++++++++++++++
 include/configs/xpedite520x.h |   10 ++++++++++
 include/configs/xpedite537x.h |   15 +++++++++++++++
 3 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 2b6e895..8df9edd 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -108,6 +108,21 @@ extern unsigned long get_board_sys_clk(unsigned long 
dummy);
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x20000000
+#define CONFIG_POST                    (CONFIG_SYS_POST_MEMORY |\
+                                        CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST                  {CONFIG_SYS_I2C_DS1621_ADDR,    \
+                                        CONFIG_SYS_I2C_DS4510_ADDR,    \
+                                        CONFIG_SYS_I2C_EEPROM_ADDR,    \
+                                        CONFIG_SYS_I2C_LM90_ADDR,      \
+                                        CONFIG_SYS_I2C_PCA9553_ADDR,   \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR0,  \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR1,  \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR2,  \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR3,  \
+                                        CONFIG_SYS_I2C_PEX8518_ADDR,   \
+                                        CONFIG_SYS_I2C_RTC_ADDR}
+/* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */
+#define I2C_ADDR_IGNORE_LIST           {0x50}
 
 /*
  * Memory map
@@ -259,6 +274,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_DS1621_ADDR     0x48
 #define CONFIG_DTT_DS1621
 #define CONFIG_DTT_SENSORS             { 0 }
+#define CONFIG_SYS_I2C_LM90_ADDR       0x4c
 
 /* I2C EEPROM - AT24C128B */
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
@@ -282,6 +298,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_PCA953X_ADDR2   0x1e
 #define CONFIG_SYS_I2C_PCA953X_ADDR3   0x1f
 #define CONFIG_SYS_I2C_PCA953X_ADDR    CONFIG_SYS_I2C_PCA953X_ADDR0
+#define CONFIG_SYS_I2C_PCA9553_ADDR    0x62
 
 /*
  * PU = pulled high, PD = pulled low
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index fc15d8e..2f31337 100644
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -93,6 +93,13 @@
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x20000000
+#define CONFIG_POST                    (CONFIG_SYS_POST_MEMORY | \
+                                        CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST                  {CONFIG_SYS_I2C_MAX1237_ADDR,   \
+                                        CONFIG_SYS_I2C_EEPROM_ADDR,    \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR0,  \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR1,  \
+                                        CONFIG_SYS_I2C_RTC_ADDR}
 
 /*
  * Memory map
@@ -265,6 +272,9 @@
 #define CONFIG_SYS_PCA953X_P14_IO6             0x40
 #define CONFIG_SYS_PCA953X_P14_IO7             0x80
 
+/* 12-bit ADC used to measure CPU diode */
+#define CONFIG_SYS_I2C_MAX1237_ADDR            0x34
+
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 309e32c..e7de13a 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -111,6 +111,20 @@ extern unsigned long get_board_ddr_clk(unsigned long 
dummy);
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x20000000
+#define CONFIG_POST                    (CONFIG_SYS_POST_MEMORY | \
+                                        CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST                  {CONFIG_SYS_I2C_DS1621_ADDR,    \
+                                        CONFIG_SYS_I2C_DS4510_ADDR,    \
+                                        CONFIG_SYS_I2C_EEPROM_ADDR,    \
+                                        CONFIG_SYS_I2C_LM90_ADDR,      \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR0,  \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR1,  \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR2,  \
+                                        CONFIG_SYS_I2C_PCA953X_ADDR3,  \
+                                        CONFIG_SYS_I2C_PEX8518_ADDR,   \
+                                        CONFIG_SYS_I2C_RTC_ADDR}
+/* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */
+#define I2C_ADDR_IGNORE_LIST           {0x50}
 
 /*
  * Memory map
@@ -266,6 +280,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_DS1621_ADDR     0x48
 #define CONFIG_DTT_DS1621
 #define CONFIG_DTT_SENSORS             { 0 }
+#define CONFIG_SYS_I2C_LM90_ADDR       0x4c
 
 /* I2C EEPROM - AT24C128B */
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
-- 
1.7.0.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to