There is no reason to have CCI no enabled by default. Enable it when your
system configuration requires it. In Xilinx configuration flow this is
work for Device Tree Generator which reads information from HW Design
configuration.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
arch/arm/dts/zynqmp.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 84d9770225aa..db4099b7516b 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -246,6 +246,7 @@
cci: cci@fd6e0000 {
compatible = "arm,cci-400";
+ status = "disabled";
reg = <0x0 0xfd6e0000 0x0 0x9000>;
ranges = <0x0 0x0 0xfd6e0000 0x10000>;
#address-cells = <1>;
--
2.31.1
