Hi all, On 01/06/21 8:43 pm, Aswath Govindraju wrote: > The following series of patches add support for the following > - Kconfig symbol for giving the load address for ATF > - USB Mass storrage boot mode in AM642-EVM > - DFU boot mode in AM642-EVM > - Host and peripheral modes for AM642-EVM in U-Boot > - Set the USB PHY core voltage to 0.85V >
Patch 9 is dependent on, https://patchwork.ozlabs.org/project/uboot/patch/20210601112147.10253-1-a-govindr...@ti.com/ Thanks, Aswath > Aswath Govindraju (10): > tools: k3_fit_atf: Add support for providing ATF load address using a > Kconfig symbol > arm: mach-k3: am642_init: Add support for USB boot mode > arm: mach-k3: am642_init: Do USB fixups to facilitate host and device > boot modes > board: ti: am64x: Set the core voltage of USB PHY to 0.85V > arm: dts: k3-am64-main: Add USB DT nodes > arm: dts: k3-am642-*-evm: Add USB support > arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to > peripheral for USB subsystem > configs: am64x_evm_*_defconfig: Move the SPL Load address to > 0x70000000, move the ATF to a latter location and rearrange EEPROM > and BSS data > arm: dts: k3-am64-main: Update the location of ATF in SRAM > configs: am64: Enable configs to support USB host and device modes > > arch/arm/dts/k3-am64-main.dtsi | 32 ++++++++++++- > arch/arm/dts/k3-am642-evm-u-boot.dtsi | 13 ++++++ > arch/arm/dts/k3-am642-evm.dts | 18 ++++++++ > arch/arm/dts/k3-am642-r5-evm.dts | 18 ++++++++ > arch/arm/mach-k3/Kconfig | 7 +++ > arch/arm/mach-k3/am642_init.c | 46 ++++++++++++++++++- > arch/arm/mach-k3/config.mk | 1 + > arch/arm/mach-k3/include/mach/am64_hardware.h | 11 +++-- > arch/arm/mach-k3/include/mach/am64_spl.h | 6 ++- > board/ti/am64x/evm.c | 14 ++++++ > configs/am64x_evm_a53_defconfig | 40 ++++++++++++++++ > configs/am64x_evm_r5_defconfig | 38 +++++++++++++-- > include/configs/am64x_evm.h | 15 +++++- > tools/k3_fit_atf.sh | 9 ++-- > 14 files changed, 251 insertions(+), 17 deletions(-) >