Thanks Patrice,
On 4/20/21 12:24 PM, Patrice CHOTARD wrote:
Hi Patrick
On 3/4/21 5:47 PM, Patrick Delaunay wrote:
For NOR devices the logical DFU buffer size is the sector_size,
as it is done in dfu_sf.c or in spi/sf_mtd.c
(sf_mtd_info.erasesize = flash->sector_size)
For NAND the DFU size was already limited to erasesize as
has_pages = true.
So the mtd dfu backend can use this erasesize for all the MTD devices,
NOR and NAND with dfu->max_buf_size = mtd->erasesize
This difference was initially copied from MTD command, where
data is fully available in RAM without size limitation.
This patch avoids to have many sector write in dfu_mtd.c at the end
of the DFU transfer and avoids issues with USB timeout or WATCHDOG.
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
---
drivers/dfu/dfu_mtd.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/dfu/dfu_mtd.c b/drivers/dfu/dfu_mtd.c
index ca67585a7e..7efb3cbd79 100644
--- a/drivers/dfu/dfu_mtd.c
+++ b/drivers/dfu/dfu_mtd.c
@@ -252,7 +252,6 @@ int dfu_fill_entity_mtd(struct dfu_entity *dfu, char
*devstr, char *s)
{
char *st;
struct mtd_info *mtd;
- bool has_pages;
int ret, part;
mtd = get_mtd_device_nm(devstr);
@@ -262,9 +261,7 @@ int dfu_fill_entity_mtd(struct dfu_entity *dfu, char
*devstr, char *s)
dfu->dev_type = DFU_DEV_MTD;
dfu->data.mtd.info = mtd;
-
- has_pages = mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
- dfu->max_buf_size = has_pages ? mtd->erasesize : 0;
+ dfu->max_buf_size = mtd->erasesize;
st = strsep(&s, " ");
if (!strcmp(st, "raw")) {
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
Thanks
Patrice
Lukasz, any remarks on your side?
Can I take this patch in my first STM32 pull request for v2020.10 ?
or a PR is already planed on your side ?
http://patchwork.ozlabs.org/project/uboot/patch/20210304174748.1.I1d824180669d63e22275f082e7ac0fe50c2b8646@changeid/
Regards
Patrick
