On 6/1/21 12:23 AM, Michael Opdenacker wrote: > This supports Falcon boot support for Microchip SAMA5D3 Xplained, > tested on raw MMC, and on raw NAND. > > spl_start_uboot() is has the simplest possible implementation. > It doesn't test the environment because enabling environment support > currently causes the SPL to exceed its maximum size (64 KiB). > It doesn't check the serial for incoming characters either because > this functionality currently doesn't seem to work from the SPL > on this board. > > Settings for Falcon boot from at FAT partition are also added to > avoid compile failures when CONFIG_SPL_OS_BOOT is enabled, but this > particular case is currently not functional as adding FAT and > partition support cause the SPL to be too big again. > > Signed-off-by: Michael Opdenacker <michael.opdenac...@bootlin.com> > --- > board/atmel/sama5d3_xplained/sama5d3_xplained.c | 7 +++++++ > include/configs/sama5d3_xplained.h | 14 ++++++++++++++ > 2 files changed, 21 insertions(+) >
Applied to u-boot-atmel/next , thanks !