On 14.06.21 16:45, Marek Behún wrote:
From: Pali Rohár <p...@kernel.org>
One of the points of putting the rescue boot command into default
environment is that user can invoke it without physical access to the
board (without having to press the factory reset button), by running
run bootcmd_rescue
in U-Boot's console.
Therefore we have to ensure that bootcmd_rescue is always set to default
value, regardless of whether the factory reset button was pressed.
Otherwise the variable will be empty for example after upgrade from
previous U-Boot.
Fixes: ec3784d62646 ("arm: mvebu: turris_mox: add support for board rescue
mode")
Fixes: 176c3e7760a2 ("arm: mvebu: turris_omnia: support invoking rescue boot from
console")
Signed-off-by: Pali Rohár <p...@kernel.org>
Signed-off-by: Marek Behún <marek.be...@nic.cz>
Applied to u-boot-marvell/master
Thanks,
Stefan
---
board/CZ.NIC/turris_mox/turris_mox.c | 14 +++++++++++---
board/CZ.NIC/turris_omnia/turris_omnia.c | 13 ++++++++++---
2 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/board/CZ.NIC/turris_mox/turris_mox.c
b/board/CZ.NIC/turris_mox/turris_mox.c
index 44c272c7cb..428cd23a19 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -440,10 +440,18 @@ static bool read_reset_button(void)
static void handle_reset_button(void)
{
+ const char * const vars[1] = { "bootcmd_rescue", };
+
+ /*
+ * Ensure that bootcmd_rescue has always stock value, so that running
+ * run bootcmd_rescue
+ * always works correctly.
+ */
+ env_set_default_vars(1, (char * const *)vars, 0);
+
if (read_reset_button()) {
- const char * const vars[3] = {
+ const char * const vars[2] = {
"bootcmd",
- "bootcmd_rescue",
"distro_bootcmd",
};
@@ -451,7 +459,7 @@ static void handle_reset_button(void)
* Set the above envs to their default values, in case the user
* managed to break them.
*/
- env_set_default_vars(3, (char * const *)vars, 0);
+ env_set_default_vars(2, (char * const *)vars, 0);
/* Ensure bootcmd_rescue is used by distroboot */
env_set("boot_targets", "rescue");
diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c
b/board/CZ.NIC/turris_omnia/turris_omnia.c
index ade923f599..8b2f94f959 100644
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -339,9 +339,17 @@ static int set_regdomain(void)
static void handle_reset_button(void)
{
+ const char * const vars[1] = { "bootcmd_rescue", };
int ret;
u8 reset_status;
+ /*
+ * Ensure that bootcmd_rescue has always stock value, so that running
+ * run bootcmd_rescue
+ * always works correctly.
+ */
+ env_set_default_vars(1, (char * const *)vars, 0);
+
ret = omnia_mcu_read(CMD_GET_RESET, &reset_status, 1);
if (ret) {
printf("omnia_mcu_read failed: %i, reset status unknown!\n",
@@ -352,9 +360,8 @@ static void handle_reset_button(void)
env_set_ulong("omnia_reset", reset_status);
if (reset_status) {
- const char * const vars[3] = {
+ const char * const vars[2] = {
"bootcmd",
- "bootcmd_rescue",
"distro_bootcmd",
};
@@ -362,7 +369,7 @@ static void handle_reset_button(void)
* Set the above envs to their default values, in case the user
* managed to break them.
*/
- env_set_default_vars(3, (char * const *)vars, 0);
+ env_set_default_vars(2, (char * const *)vars, 0);
/* Ensure bootcmd_rescue is used by distroboot */
env_set("boot_targets", "rescue");
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
