On 17.06.21 17:57, Fabio Estevam wrote:
Remove the LED unit addresses and reg properties to
fix the following dtc build warnings:
arch/arm/dts/o4-imx-nano.dtb: Warning (reg_format): /leds/led@0:reg: property
has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
...
arch/arm/dts/o4-imx-nano.dtb: Warning (avoid_default_addr_size): /leds/led@0:
Relying on default #address-cells value
Reported-by: Tom Rini <tr...@konsulko.com>
Signed-off-by: Fabio Estevam <feste...@denx.de>
---
Thanks, applied to -master.
Best regards,
Stefano
arch/arm/dts/o4-imx-nano.dts | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/arch/arm/dts/o4-imx-nano.dts b/arch/arm/dts/o4-imx-nano.dts
index d1785b7dc702..54d32f9dd47b 100644
--- a/arch/arm/dts/o4-imx-nano.dts
+++ b/arch/arm/dts/o4-imx-nano.dts
@@ -24,40 +24,34 @@
leds {
compatible = "gpio-leds";
- led@0 {
+ led0 {
color = <LED_COLOR_ID_RED>;
gpios = <&pcf8574a 0 GPIO_ACTIVE_LOW>;
- reg = <0>;
};
- led@1 {
+ led1{
color = <LED_COLOR_ID_GREEN>;
gpios = <&pcf8574a 1 GPIO_ACTIVE_LOW>;
- reg = <1>;
};
- led@2 {
+ led2 {
gpios = <&pcf8574a 2 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_BLUE>;
- reg = <2>;
};
- led@3 {
+ led3 {
color = <LED_COLOR_ID_RED>;
gpios = <&pcf8574a 3 GPIO_ACTIVE_LOW>;
- reg = <3>;
};
- led@4 {
+ led4{
color = <LED_COLOR_ID_GREEN>;
gpios = <&pcf8574a 4 GPIO_ACTIVE_LOW>;
- reg = <4>;
};
- led@5 {
+ led5 {
color = <LED_COLOR_ID_BLUE>;
gpios = <&pcf8574a 5 GPIO_ACTIVE_LOW>;
- reg = <5>;
};
};
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
