On Thu, 27 May 2021 at 16:00, Rasmus Villemoes <rasmus.villem...@prevas.dk> wrote: > > As preparation for having the wdt-uclass provided watchdog_reset() > function handle all DM watchdog devices, and not just the first such, > introduce a uclass-owned struct to hold the reset_period and > next_reset, so these become per-device instead of being static > variables. > > No functional change intended. > > Signed-off-by: Rasmus Villemoes <rasmus.villem...@prevas.dk> > --- > drivers/watchdog/wdt-uclass.c | 65 ++++++++++++++++++++++++----------- > 1 file changed, 45 insertions(+), 20 deletions(-) >
Reviewed-by: Simon Glass <s...@chromium.org> nit below > diff --git a/drivers/watchdog/wdt-uclass.c b/drivers/watchdog/wdt-uclass.c > index 634428fa24..3b6aa3d586 100644 > --- a/drivers/watchdog/wdt-uclass.c > +++ b/drivers/watchdog/wdt-uclass.c > @@ -18,15 +18,15 @@ DECLARE_GLOBAL_DATA_PTR; > > #define WATCHDOG_TIMEOUT_SECS (CONFIG_WATCHDOG_TIMEOUT_MSECS / 1000) > > -/* > - * Reset every 1000ms, or however often is required as indicated by a > - * hw_margin_ms property. > - */ > -static ulong reset_period = 1000; > +struct wdt_priv { > + u32 timeout; > + ulong reset_period; > + ulong next_reset; can you comment these? > +}; > > int initr_watchdog(void) > { > - u32 timeout = WATCHDOG_TIMEOUT_SECS; > + struct wdt_priv *priv; > int ret; > > /* > @@ -42,28 +42,21 @@ int initr_watchdog(void) > return 0; > } > } > - > - if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) > { > - timeout = dev_read_u32_default(gd->watchdog_dev, > "timeout-sec", > - WATCHDOG_TIMEOUT_SECS); > - reset_period = dev_read_u32_default(gd->watchdog_dev, > - "hw_margin_ms", > - 4 * reset_period) / 4; > - } > + priv = dev_get_uclass_priv(gd->watchdog_dev); > > if (!CONFIG_IS_ENABLED(WATCHDOG_AUTOSTART)) { > printf("WDT: Not starting\n"); > return 0; > } > > - ret = wdt_start(gd->watchdog_dev, timeout * 1000, 0); > + ret = wdt_start(gd->watchdog_dev, priv->timeout * 1000, 0); > if (ret != 0) { > printf("WDT: Failed to start\n"); > return 0; > } > > printf("WDT: Started with%s servicing (%ds timeout)\n", > - IS_ENABLED(CONFIG_WATCHDOG) ? "" : "out", timeout); > + IS_ENABLED(CONFIG_WATCHDOG) ? "" : "out", priv->timeout); > > return 0; > } > @@ -137,18 +130,21 @@ int wdt_expire_now(struct udevice *dev, ulong flags) > */ > void watchdog_reset(void) > { > - static ulong next_reset; > + struct wdt_priv *priv; > + struct udevice *dev; > ulong now; > > /* Exit if GD is not ready or watchdog is not initialized yet */ > if (!gd || !(gd->flags & GD_FLG_WDT_READY)) > return; > > + dev = gd->watchdog_dev; > + priv = dev_get_uclass_priv(dev); > /* Do not reset the watchdog too often */ > now = get_timer(0); > - if (time_after_eq(now, next_reset)) { > - next_reset = now + reset_period; > - wdt_reset(gd->watchdog_dev); > + if (time_after_eq(now, priv->next_reset)) { > + priv->next_reset = now + priv->reset_period; > + wdt_reset(dev); > } > } > #endif > @@ -175,9 +171,38 @@ static int wdt_post_bind(struct udevice *dev) > return 0; > } > > +static int wdt_pre_probe(struct udevice *dev) > +{ > + u32 timeout = WATCHDOG_TIMEOUT_SECS; > + /* > + * Reset every 1000ms, or however often is required as > + * indicated by a hw_margin_ms property. > + */ > + ulong reset_period = 1000; > + struct wdt_priv *priv; > + > + if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) > { > + timeout = dev_read_u32_default(dev, "timeout-sec", timeout); > + reset_period = dev_read_u32_default(dev, "hw_margin_ms", > + 4 * reset_period) / 4; > + } > + priv = dev_get_uclass_priv(dev); > + priv->timeout = timeout; > + priv->reset_period = reset_period; > + /* > + * Pretend this device was last reset "long" ago so the first > + * watchdog_reset will actually call its ->reset method. > + */ > + priv->next_reset = get_timer(0); > + > + return 0; > +} > + > UCLASS_DRIVER(wdt) = { > .id = UCLASS_WDT, > .name = "watchdog", > .flags = DM_UC_FLAG_SEQ_ALIAS, > .post_bind = wdt_post_bind, > + .pre_probe = wdt_pre_probe, > + .per_device_auto = sizeof(struct wdt_priv), > }; > -- > 2.31.1 >