On Tue, 29 Jun 2021 08:11:22 -0400 Tom Rini <tr...@konsulko.com> wrote:
> On Tue, Jun 29, 2021 at 12:45:55PM +0100, Andre Przywara wrote: > > > The v2021.07 merge window saw the removal of the Arm Ltd. Versatile > > Express platform, along with their CA5, CA9 and TC2 boards. The trigger > > was the missing conversion of the MMC driver. > > > > Some folks complained about that internally, so bring those boards back, > > but better than ever: > > - Use DM and OF_CONTROL for all the boards. Use the .dts files from the > > latest Linux kernel (5.13) for that. > > - Move the board selection choice into the platform's Kconfig. > > - Clean up some shared config and common definitions. > > - Drop obsolete features like ATAGs support. > > - Switch to the DM_ETH version of the SMC911X Ethernet driver. > > - Drop MMC support. > > > > The PL180 MMC driver actually supports DM_MMC, but that requires a > > DM_GPIO driver for the card detect GPIO, which we don't have. This > > specific GPIO is actually handled via the "sysregs" device, so we would > > need a driver for that. QEMU does not emulate this part, also the DT > > description is somewhat "special", so this is left for later. > > > > This version compiles without any warning for all three boards now. > > Tested on QEMU. > > > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com> > > --- > > Hi, > > > > this relies on the SMC911x driver DT changes, as posted here: > > https://lists.denx.de/pipermail/u-boot/2021-June/452989.html > > I put a version with the changes broken down here: > > https://github.com/Andre-ARM/u-boot/commits/tc2-history > > > > This was tested on QEMU, for vexpress_ca15_tc2_defconfig with: > > $ qemu-system-arm -M vexpress-a15,secure=on -cpu cortex-a15 -m 1G -smp 1 \ > > -drive file=tramp-tc2.bin,if=pflash,format=raw,read-only \ > > -device loader,file=u-boot.bin,addr=0x80800000 -nographic > > > > Where tramp-tc2.bin is a trampoline replacing the board's firmware: > > 00000000 00 00 a0 e3 80 00 48 e3 10 ff 2f e1 > > (mov r0, #0; movt r0, #0x8080; bx r0) > > > > The vexpress_ca9x4_defconfig uses a different memory map, so the runes are: > > $ qemu-system-arm -M vexpress-a9 -cpu cortex-a9 -m 1G -smp 1 \ > > -drive file=tramp-ca9.bin,if=pflash,format=raw,read-only \ > > -device loader,file=u-boot.bin,addr=0x60800000 -nographic > > > > tramp-ca9.bin: > > 00000000 00 00 a0 e3 80 00 46 e3 10 ff 2f e1 > > (mov r0, #0; movt r0, #0x6080; bx r0) > > My big question is how do we run this in CI? Or does it not _need_ that > firmware file to really exist? Or is there a pending change to > https://gitlab.denx.de/u-boot/u-boot-test-hooks.git to generate / just > have exist those magic empty bins? Thanks! So from digging into this I see that this loads U-Boot's ELF build, via QEMU's -kernel parameter. Which is fine, but not really what is happening on real hardware. I checked and the v2021.04 version worked with this approach, but my build does not. I will have a look into this now. Thanks! Andre