On Tue, Oct 26, 2010 at 4:34 PM, Stefano Babic <sba...@denx.de> wrote: > On 10/26/2010 10:25 AM, Heiko Schocher wrote: >> We should set the CONFIG_SYS_INIT_SP_ADDR @ (IRAM_BASE_ADDR + IRAM_BASE_SIZE >> - CONFIG_SYS_GBL_DATA_SIZE) > > Agree, this is what I set for the vision2 board. We should be consistent > and do the same for the mx51evk. > >> >> Don;t know if IRAM_BASE_SIZE exists ... > > we must define it. I set it in the board configuration file, but it is > wrong. The value should be moved into register definition file for the > SoC (imx-regs.h) > I see many other platforms using 0x1000 offset way to define CONFIG_SYS_INIT_SP_ADDR, so I did that to make it a little bit more common. But I'm fine to start from the end, and will send v3 of this patch soon.
-- Regards, Shawn _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot