Hi Tim, On Thu, Jul 1, 2021 at 8:58 PM Tim Harvey <thar...@gateworks.com> wrote:
> Fabio, > > I no longer have the patches/config around and am not sure I even have > a working imx8mm-evk anymore. > > Do you have the patches I submitted to enable USB OTG in general on IMX8MM? > usb: ehci-mx6: add IMX8MM and IMX8MN OTG support > usb: ehci-mx6: move mode set/detect to probe Thanks for pointing out these patches. Does "ums 0 mmc 0" work for you? I will have a try. > I would like to get those patches accepted and I think there was some > concern that 'usb: ehci-mx6: move mode set/detect to probe' may break > gadget support. I have applied this one and tested on warp7 board via "ums 0 mmc 0" and it still works. > I haven't needed to use SDP in some time (we have JTAG programming > support for eMMC now). Let me see if I can get SDP working on > imx8mm-venice. Thanks, appreciate it. Regards, Fabio Estevam
